fix warning:

  drivers/net/3c523.c:582: warning: ‘cleanup_card’ defined but not used

No code changed:

md5:
   ebe4a1b27d3f21b0b12a78c58463b0d7  3c523.o.before.asm
   ebe4a1b27d3f21b0b12a78c58463b0d7  3c523.o.after.asm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix warning:

  drivers/net/depca.c: In function ‘depca_eisa_probe’:
  drivers/net/depca.c:1564: warning: ‘mem_start’ may be used uninitialized in this function

this seems to be a real bug - depca_eisa_probe() does not check
for failure. Add it, symmetric to depca_isa_probe().
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix this warning:

  drivers/net/atlx/atl2.c: In function ‘atl2_request_irq’:
  drivers/net/atlx/atl2.c:644: warning: unused variable ‘err’

'err' is unused in the !CONFIG_PCI_MSI case.

Instead of further increasing the #ifdeffery in this function,
restructure the code a bit and get rid of the #ifdef. This
relies on the fact that pci_enable_msi() will always fail in
the !CONFIG_PCI_MSI case.

There should be no change in driver behavior.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix this warning:

  net/bluetooth/rfcomm/sock.c: In function ‘rfcomm_sock_ioctl’:
  net/bluetooth/rfcomm/sock.c:795: warning: unused variable ‘sk’

perhaps BT_DEBUG() should be improved to do printf format checking
instead of the #ifdef, but that looks quite intrusive: each bluetooth
.c file undefines the macro.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix this warning:

  net/sunrpc/xprtrdma/verbs.c: In function ‘rpcrdma_conn_upcall’:
  net/sunrpc/xprtrdma/verbs.c:279: warning: unused variable ‘addr’
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix this warning:

  net/ax25/sysctl_net_ax25.c:27: warning: ‘min_ds_timeout’ defined but not used
  net/ax25/sysctl_net_ax25.c:27: warning: ‘max_ds_timeout’ defined but not used

These are only used in the CONFIG_AX25_DAMA_SLAVE case.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix warning:

  drivers/net/mlx4/mcg.c: In function ‘mlx4_multicast_attach’:
  drivers/net/mlx4/mcg.c:217: warning: integer overflow in expression

there was no real danger of overflow here though.

md5:
   db8eb55620f886c03854a2abb2ce6c3f  mcg.o.before.asm
   db8eb55620f886c03854a2abb2ce6c3f  mcg.o.after.asm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  net/dccp/options.c: In function ‘dccp_parse_options’:
  net/dccp/options.c:67: warning: ‘value’ may be used uninitialized in this function

is a bogus GCC warning. The compiler does not recognize the relation
between "value" and "mandatory" variables: the code flow can ever reach
the "out_invalid_option:" label if 'mandatory' is set to 1, and when
'mandatory' is non-zero, we'll always have 'value' initialized.

Help out the compiler by annotating the variable.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/cassini.c: In function ‘cas_rx_ringN’:
  drivers/net/cassini.c:2350: warning: ‘skb’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between cas_rx_process_pkt() and 'skb'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_activate_rx_rings’:
  drivers/net/mlx4/en_rx.c:412: warning: ‘err’ may be used uninitialized in this function

Triggers because 'err' is uninitialized in the following input
conditions: priv->rx_ring_num is zero and mlx4_en_fill_rx_buffers()
fails.

But even if ->rx_ring_num is nonzero, 'err' will be zero if
mlx4_en_fill_rx_buffers() fails and mlx4_en_activate_rx_rings() returns
success - incorrectly.

So it's best to keep the error code uptodate on mlx4_en_fill_rx_buffers()
calls as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/wan/z85230.c: In function ‘z8530_interrupt’:
  drivers/net/wan/z85230.c:713: warning: ‘intr’ may be used uninitialized in this function

is clearly bogus - annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/sis900.c: In function ‘sis900_timer’:
  drivers/net/sis900.c:1280: warning: ‘speed’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between sis900_read_mode(), 'speed' and 'duplex'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  fs/dlm/netlink.c: In function ‘dlm_timeout_warn’:
  fs/dlm/netlink.c:131: warning: ‘send_skb’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between prepare_data() and send_skb.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  net/dsa/mv88e6060.c: In function ‘mv88e6060_poll_link’:
  net/dsa/mv88e6060.c:225: warning: ‘port_status’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between 'link' and 'port_status'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  net/dsa/mv88e6xxx.c: In function ‘mv88e6xxx_poll_link’:
  net/dsa/mv88e6xxx.c:361: warning: ‘port_status’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between 'link' and 'port_status'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  net/ipv6/ip6_flowlabel.c: In function ‘ipv6_flowlabel_opt’:
  net/ipv6/ip6_flowlabel.c:467: warning: ‘err’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between fl_create() and 'err'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  net/sched/sch_hfsc.c: In function ‘hfsc_enqueue’:
  net/sched/sch_hfsc.c:1577: warning: ‘err’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between hfsc_classify(), 'cl' and 'err'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  net/sunrpc/xprtrdma/svc_rdma_transport.c: In function ‘svc_rdma_accept’:
  net/sunrpc/xprtrdma/svc_rdma_transport.c:830: warning: ‘dma_mr_acc’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) flow connection
between need_dma_mr and dma_mr_acc.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/qla3xxx.c: In function ‘ql3xxx_probe’:
  drivers/net/qla3xxx.c:3912: warning: ‘pci_using_dac’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between 'pci_using_dac' and 'err'.

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/niu.c: In function ‘esr_reset’:
  drivers/net/niu.c:741: warning: ‘reset’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between:

 - esr_read_reset() and 'reset'

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

these warnings:

  drivers/net/niu.c: In function ‘serdes_init_niu_1g_serdes’:
  drivers/net/niu.c:451: warning: ‘sig’ may be used uninitialized in this function
  drivers/net/niu.c: In function ‘serdes_init_niu_10g_serdes’:
  drivers/net/niu.c:550: warning: ‘sig’ may be used uninitialized in this function

triggers because GCC does not recognize that the max_retry loop
always initializes 'sig', due to max_retry != 0.

Annotate them.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

this warning:

  drivers/net/s2io.c: In function ‘rx_intr_handler’:
  drivers/net/s2io.c:7369: warning: ‘lro’ may be used uninitialized in this function

triggers because GCC does not recognize the (correct) error flow
between:

 - s2io_club_tcp_session()and 'lro'

Annotate it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch will filter out the uevent not related to the init_net.
Without this patch if a network device is created in a network
namespace with the same name as one network device belonging to the
initial network namespace (eg. eth0), when the network namespace
will die and the network device will be destroyed, an event will
be sent and catched by the udevd daemon. That will result to have
the real network device to be shutdown because the udevd/uevent are
not namespace aware.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

 A patch to put names on the niu interrupt vectors according the syntax below.
 This is needed to assign correct affinity.

 > So on a multiqueue card with 2 RX queues and 2 TX queues we'd
 > have names like:
 >
 > 	eth0-rx-0
 > 	eth0-rx-1
 > 	eth0-tx-0
 > 	eth0-tx-1
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Tested-by: Jesper Dangaard Brouer <jdb@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since pskb_expand_head creates copy of the shared area we
cannot keep any frag ptr past de-cloning. This fixes the
tcpdump recvfrom -EFAULT problem.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

After implementing qdisc->ops->peek() there is no more calling
qdisc_tree_decrease_qlen() without rtnl_lock(), so qdisc_list_lock
added by commit: f6e0b239 "pkt_sched:
Fix qdisc list locking" can be removed.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Impact: Optimization

Like done in inet_unhash(), we can avoid taking a chain lock if
socket is not hashed in udp_unhash()

Triggered by close(socket(AF_INET, SOCK_DGRAM, 0));
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

prot->destroy is not called with BH disabled. So we must add
explicit BH disable around call to sock_prot_inuse_add()
in sctp_destroy_sock()
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 4a3e8181.

On request from Alan Cox.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 52429eb2.

On request from Alan Cox.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 7ea3a9ad.

On request from Alan Cox.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct will be kfreed in a moment, so...
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change forces the bits to 0 by using an &= operation with an inverted
mask of all options instead of using an |= with a value of 0.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a reference to a Buffer Size extention bit that is unneded by
82575/82576 hardware.  Since it is not needed it should be removed from the
code.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the netlink option for DCB is necessary to actually be useful,
simplified the Kconfig option.  In addition, added useful help text for the
Kconfig option.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add %pm to omit the colons when printing a mac address.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Made usb_drivers reset_resume function point to hso_resume this 
fixes problems a usb reset is done when the network interface
is left idle for a few minutes. Possibly reset_resume should
initialise hardware more but this works in the common case.
Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>