None of the SH PCI controllers support MWI, it is always treated as a
direct memory write, so simply disable it outright. In the case of the
PCI cache line size, consult that for the pci_dma_burst_advice()
strategy, and switch over to PCI_DMA_BURST_MULTIPLE, as PPC64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

As there is only a single controller and remapping has no impact for the
address range in question, just initialize it directly in the controller
definition. This fixes up boot time warnings about not having the field
initialized.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch removes the ->build_rate_table() callback,
->recalc() may instead be used for this purpose.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch converts the sh7785 clock code to make use
of clk_rate_table_build() and clk_rate_table_round().
The ->build_rate_table() callback is removed, the
table building is instead handled in ->recalc().
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SuperH-specific clock framework helper functions:
- clk_rate_table_build() - build cpufreq table from divisors/multipliers
- clk_rate_table_round() - use cpufreq table to find matching frequency
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch converts the sh7785 pll implementation from the
all-in-one code in frqmr_recalc() and frqmr_build_rate_table()
to a separate struct clk. This allows us to remove the processor
specific multiplier and use generic rate table functions.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds preliminary support for the ms7724se solution engine board.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This kills off after_bootmem and switches to using slab_is_available()
instead. Presently the only place this is used is by the sh64 ioremap,
and there's not much point in keeping the reference around otherwise.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds a new SH_CLK_CPG for parts that have CPG support.
SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set
for platforms that want clock-cpg to register the legacy clocks. With
this new config item in place, it is now possible to start layering more
generic CPG code in place while other platforms transition off of the
legacy clocks.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds a NR_IRQS_LEGACY definition, which will be used by sparse irq.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in
-next, but as we can not presently enable SPARSE_IRQ without the early
irq_desc alloc patch, protect it with an ifdef until the interface has
settled and we are ready to enable it system-wide.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch fixes the LCDC driver to avoid calling the
function sh_mobile_lcdc_start_stop(priv, 0) unless the
same function has been called before to start the LCDC
hardware.

Triggered when sh_mobile_lcdcfb.c failed to probe() due to
missing MSTP clocks.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch fixes the ap325rxa ncm03j camera code to handle
the case where no i2c driver is present. Without this fix
i2c_transfer() may be passed NULL as adapter which results
in a crash.

Triggered when i2c-sh_mobile.c failed to probe() due to
missing MSTP clocks.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Do not go beyond ARRAY_SIZE of onchip_ops
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Fix clkfwk branch compile error in clock-sh7722.c.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This is just a simple arch_probe_nr_irqs() stub that wraps to the
platform defined number of IRQs. This can be made gradually more
intelligent based on what we can infer from the INTC tables and so on.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the
intc and ipr controller registration paths. As these are the primary call
paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready.

There is the added benefit now that each CPU contains specific IPR and
INTC tables, so only the vectors with interrupt sources backing them will
ever see an irq_desc instantiation. This effectively packs irq_desc
down to match the CPU, rather than padding NR_IRQS out to cover the valid
vector range.

Boards with extra sources will still have to fiddle with the nr_irqs
setting, but they can continue doing so through the machvec as before.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This converts a few places that were using the old irq_desc[] array over
to the shiny new irq_to_desc() helper. Preperatory work for sparse irq
support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This tidies up how the SR.IMASK bitmap is managed, using the bitmap API
directly instead. At the same time, tidy up the irq_chip conversion a
bit.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6:
  drm: Copy back ioctl data to userspace regardless of return code.
  drm: Round size of SHM maps to PAGE_SIZE

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: 64-bit: Fix system lockup.
  MIPS: IP28: Change to build with -mr10k-cache-barrier=store
  MIPS: IP22: Fix hang in power button interrupt handler
  MIPS: IP32: Fix hang on shutdown in power button interrupt handler.

* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits)
  [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *
  [ARM] 5517/1: integrator: don't put clock lookups in __initdata
  [ARM] 5518/1: versatile: don't put clock lookups in __initdata
  [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF
  [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2
  [ARM] realview: fix broadcast tick support
  [ARM] realview: remove useless smp_cross_call_done()
  [ARM] smp: fix cpumask usage in ARM SMP code
  [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error
  [ARM] 5509/1: ep93xx: clkdev enable UARTS
  ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2
  ARM: OMAP3: Fix HW SAVEANDRESTORE shift define
  ARM: OMAP3: Fix number of GPIO lines for 34xx
  [ARM] S3C: Do not set clk->owner field if unset
  [ARM] S3C2410: mach-bast.c registering i2c data too early
  [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c
  [ARM] S3C64XX: fix GPIO debug
  [ARM] S3C64XX: GPIO include cleanup
  [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning
  [ARM] nwfpe: Add decleration for ExtendedCPDO
  ...

The second argument of the probe method points to the amba_id
structure, so it's better passed with the correct type. None of the
current in-tree drivers uses the pointer, so they have only been
checked for a clean compile.

Change suggested by Russell King.
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fixes a regression from commit 9d5b3ffc
('drm: fixup some of the ioctl function exit paths'): The vblank ioctl
needs to update the userspace parameters when interrupted by a signal,
which was prevented by the return code check. This could cause the X
server to hang in drmWaitVBlank().
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

The address range size calculation inside local_flush_tlb_kernel_range()
is being truncated by a too small size variable holder on 64-bit systems.
The truncated size can result in an erroneous tlbsize check that means we
sit spinning inside a loop trying to flush a hige number of TLB entries.
This is for all intents and purposes a system hang. Fix by using an
appropriately sized valiable to hold the size.

[Ralf: Greg's original patch submission identified the issue and fixed one
instance in tlb-r4k.c but there there were several more.  For consistency
I also modified tlb-r3k.c even though that file is only used on 32-bit.]
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Richard Sandiford's new code for inserting the cache-barriers, for GCC
4.3 and above and already incorporated in the current GCC-release, uses
a slightly different option-syntax.
Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cdrom: beyond ARRAY_SIZE of viocd_diskinfo
  xen/blkfront: fix warning when deleting gendisk on unplug/shutdown
  xen/blkfront: allow xenbus state transition to Closing->Closed  when not Connected

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix pointer initialization and checks in cifs_follow_symlink (try #4)

Do not go beyond ARRAY_SIZE of viocd_diskinfo
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Fixes several compile errors due to the recent hd64461 I/O base changes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: pcf50633: fix unsafe disable_irq()
  mfd: Keep a cache of WM8350 volatile values

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv4: make default for INET_LRO consistent with help text
  net: fix skb_seq_read returning wrong offset/length for page frag data
  pkt_sched: gen_estimator: use 64 bit intermediate counters for bps
  be2net: add two new pci device ids to pci device table
  sch_teql: should not dereference skb after ndo_start_xmit()
  tcp: fix MSG_PEEK race check
  Doc: fixed descriptions on /proc/sys/net/core/* and /proc/sys/net/unix/*
  Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR?
  mv643xx_eth: fix PPC DMA breakage
  bonding: fix link down handling in 802.3ad mode
  bridge: fix initial packet flood if !STP
  bridge: relay bridge multicast pkgs if !STP
  NET: Meth: Fix unsafe mix of irq and non-irq spinlocks.
  mlx4_en: Fix not deleted napi structures
  ipconfig: handle case of delayed DHCP server
  netpoll: don't dereference NULL dev from np
  wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  TPM: get_event_name stack corruption