- 11 Dec, 2009 40 commits
-
-
Sergei Shtylyov authored
Stop playing with musb->lock and abusing musb_gadget_set_halt() in the code clearing the endpoint halt feature -- instead, manipulate the registers directly. While at it, get rid uf unneeded line breaks and over-indentation in the code setting the endpoint halt feature. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
Implement the driver's set_wedge() method by adding the 'wedged' flag to the 'struct musb_ep'. Signed-off-by:
-
Sergei Shtylyov authored
Commit a5073b52 (musb_gadget: fix unhandled endpoint 0 IRQs) somehow missed its key change: "The gadget EP0 code routinely ignores an interrupt at end of the data phase because of musb_g_ep0_giveback() resetting the state machine to "idle, waiting for SETUP" phase prematurely." So, the majority of the cases of unhandled IRQs is still unfixed... Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Anand Gadiyar authored
MUSB: save hardware revision at init This can be used later to flag workarounds for issues affecting particular revisions. Saving this at init avoids having to read the HWVERS register multiple times in code. While at it, use macros to extract the version information instead of using hardcoded values. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Mike Frysinger authored
The debug code in the DMA ISR uses a %d for a size_t when it should be using %zu. Otherwise gcc whines with: drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': drivers/usb/musb/musbhsdma.c:288: warning: format '%d' expects type 'int', but argument 7 has type 'size_t' Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Cliff Cai authored
Otherwise we get the link failure: drivers/built-in.o: In function 'musb_platform_init': drivers/usb/musb/blackfin.c:300: undefined reference to 'usb_nop_xceiv_register' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
-
Sonic Zhang authored
Since we can't work around anomaly 05000380, throw a build error up and instruct the user to use a different mode. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Cliff Cai authored
If we clear the interrupt pending bits at the end, we sometimes return too fast and have the same interrupt assert itself. There is no way in a Blackfin system to force a sync of this state, so the hardware manual instructs people to clear interrupt flags early in their ISR. Signed-off-by:
-
Bryan Wu authored
Update function definition to match latest MUSB framework. Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Sonic Zhang authored
Only allow USE_MODE1 when the Blackfin part is not affected by anomaly 05000456 (USB Receive Interrupt Is Not Generated in DMA Mode 1) since we can't support the mode in that case. Signed-off-by:
-
Sonic Zhang authored
Add some helpful notes about how the driver works around different anomalies that exist in the on-chip host controller. Signed-off-by:
-
Sonic Zhang authored
Do not allow MUSB driver to be selected on derivatives that don't have the MUSB controller on them. Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Bryan Wu authored
The Blackfin version of musb_read_target_reg_base() returns a u16 when the common code expects a (void __iomem *), so update the Blackfin function to return the right value. This fixes the compile warning: drivers/usb/musb/musb_core.c: In function 'musb_core_init': drivers/usb/musb/musb_core.c:1448: warning: assignment makes pointer from integer without a cast Signed-off-by:
-
Mike Frysinger authored
Otherwise gcc will whine about epnum/dma_reg being unused when building for BF54x parts. Signed-off-by:
-
Sarah Sharp authored
The xHCI 0.95 and 0.96 specification defines several transfer buffer request completion codes that indicate a USB transaction error occurred. When a stall, babble, transaction, or split transaction error completion code is set, the xHCI has halted that endpoint ring. Software must issue a Reset Endpoint command and a Set Transfer Ring Dequeue Pointer command to clean up the halted ring. The USB device driver is supposed to call into usb_reset_endpoint() when an endpoint stalls. That calls into the xHCI driver to issue the proper commands. However, drivers don't call that function for the other errors that cause the xHC to halt the endpoint ring. If a babble, transaction, or split transaction error occurs, check if the endpoint context reports a halted condition, and clean up the endpoint ring if it does. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sarah Sharp authored
An xHCI host controller manufacturer can choose to implement several vendor-specific informational completion codes. These are all to be treated like a successful transfer completion. Signed-off-by:
-
Sarah Sharp authored
When the xHCI hardware says a transfer completed with a split transaction error, set the URB status to -EPROTO. Signed-off-by:
-
Sarah Sharp authored
The transfer descriptor (TD) is a series of transfer request buffers (TRBs) that describe the buffer pointer, length, and other characteristics. The xHCI controllers want to know an estimate of how long the TD is, for caching reasons. In each TRB, there is a "TD size" field that provides a rough estimate of the remaining buffers to be transmitted, including the buffer pointed to by that TRB. The TD size is 5 bits long, and contains the remaining size in bytes, right shifted by 10 bits. So a remaining TD size less than 1024 would get a zero in the TD size field, and a remaining size greater than 32767 would get 31 in the field. This patches fixes a bug in the TD_REMAINDER macro that is triggered when the URB has a scatter gather list with a size bigger than 32767 bytes. Not all host controllers pay attention to the TD size field, so the bug will not appear on all USB 3.0 hosts. Signed-off-by:
-
Michal Nazarewicz authored
The Multifunction Composite Gadget has two configurations consisting of Ethernet (RNDIS in first and CDC Ethernet in second configuration), CDC Serial and File-backed Storage functions. When connected to a Windows host, the first configuration is chosen thus gadget provides RNDIS Ethernet, serial and mass storage whereas when connected to Linux host, second configuration is chosen thus providing CDC Ethernet, serial and mass storage. Which configurations are built can be configured via KConfig options. Signed-off-by:
Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by:
-
Michal Nazarewicz authored
thread_exits callback has been added to fsg_common structure. This callback is called when MSF's thread exits (is terminated by a signal or function is unregistered). It's then gadget's responsibility to unregister the gadget. Signed-off-by:
-
Michal Nazarewicz authored
Changed definition of usb_composite_unregister() function removing __exit declaration. This way, the function is included even if the whole code was not compiled as module. This is required if a compiled-in code would like to unregister a composite gadget. Signed-off-by:
-
Michal Nazarewicz authored
Most of the data from fsg_dev have been moved to fsg_common structure. The fsg_dev structure holds only endpoint dependent data. The fsg_common structure has a fsg pointer which points to active fsg_dev structure -- endpoints are referenced via this pointer. This fixes the problem of several threads created when a single instance of MSF is used in several USB configurations. Signed-off-by:
-
Michal Nazarewicz authored
Fixed most of the errors and warnings in f_mass_storage.c and storage_common.c reported by checkpatch.pl as well as updated comments. Signed-off-by:
-
Michal Nazarewicz authored
A two fsg_config fields were added: * lun_name_format which lets one specify format of a name used when registering LUN devices. It is useful if there would be ever need for two MSFs to be used in a single composite gadget (as opposed to single MSF in two configuration); and * thread_name which lets one specify the name of a kernel thread used by MSF. This is not required since two or more threads can have the same name but nevertheless it's here for consistency. Signed-off-by:
-
Michal Nazarewicz authored
Removed all references to mod_data in f_mass_storage.c and instead created fsg_config structure fsg_common_init() takes as an argument -- it stores all configuration options that were previously taken from mod_data. Moreover, The fsg_config structure allows per-LUN configuration of removable and CD-ROM emulation. Module parameters are handled by defining an object of fsg_module_parameters structure and then declaring module parameters via FSG_MODULE_PARAMETERS() macro. It adds proper declarations to the code making specified object be populated from module parameters. To use values stored there one may use either fsg_config_from_params() which will will a fsg_config structure with values taken from fsg_module_parameters structure or fsg_common_from_params() which will initialise fsg_common structure directly. Signed-off-by:
-
Michal Nazarewicz authored
The f_mass_storage.c has been changed into a composite function. mass_storage.c file has been introduced which defines a g_mass_storage gadget based on composite framework. Signed-off-by:
-
Sarah Sharp authored
It's not surprising that the transfer request buffer (TRB) physical to virtual address translation function has bugs in it, since I wrote most of it at 4am last October. Add a test suite to check the TRB math. This runs at memory initialization time, and causes the driver to fail to load if the TRB math fails. Please excuse the excessively long lines in the test vectors; they can't really be made shorter and still be readable. Signed-off-by:
-
Vikram Pandita authored
Allow module_param to be writeable. This allows us to change the parameter if usbtest is built-in in the kernel. Signed-off-by:
Vikram Pandita <vikram.pandita@ti.com> Signed-off-by:
-
Dan Carpenter authored
Add a missing goto. We dereference usb_class on the next line. Found by smatch static checker. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
td and dev can not be null. Also they are dereferenced in list_for_each_entry_safe and list_for_each before the check happens so we would have an oops if it were possible for them to be null. Found using the smatch static checker. Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Alan Stern authored
This patch (as1302) removes the auto_pm flag from struct usb_device. The flag's only purpose was to distinguish between autosuspends and external suspends, but that information is now available in the pm_message_t argument passed to suspend methods. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
H Hartley Sweeten authored
Quiet the following sparse noise: warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Zhang Le authored
Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by:
Zhang Le <r0bertz@gentoo.org> Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
Bart Hartgers <bart.hartgers@gmail.com> Cc: Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
