1. 16 Oct, 2007 40 commits
    • Nick Piggin's avatar
      mm: improve find_lock_page · 45726cb4
      Nick Piggin authored
      find_lock_page does not need to recheck ->index because if the page is in the
      right mapping then the index must be the same.  Also, tree_lock does not need
      to be retaken after the page is locked in order to test that ->mapping has not
      changed, because holding the page lock pins its mapping.
      Signed-off-by: default avatarNick Piggin <npiggin@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      45726cb4
    • Nick Piggin's avatar
      mm: use lockless radix-tree probe · 00128188
      Nick Piggin authored
      Probing pages and radix_tree_tagged are lockless operations with the lockless
      radix-tree.  Convert these users to RCU locking rather than using tree_lock.
      Signed-off-by: default avatarNick Piggin <npiggin@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      00128188
    • Nick Piggin's avatar
      remove ZERO_PAGE · 557ed1fa
      Nick Piggin authored
      The commit b5810039 contains the note
      
        A last caveat: the ZERO_PAGE is now refcounted and managed with rmap
        (and thus mapcounted and count towards shared rss).  These writes to
        the struct page could cause excessive cacheline bouncing on big
        systems.  There are a number of ways this could be addressed if it is
        an issue.
      
      And indeed this cacheline bouncing has shown up on large SGI systems.
      There was a situation where an Altix system was essentially livelocked
      tearing down ZERO_PAGE pagetables when an HPC app aborted during startup.
      This situation can be avoided in userspace, but it does highlight the
      potential scalability problem with refcounting ZERO_PAGE, and corner
      cases where it can really hurt (we don't want the system to livelock!).
      
      There are several broad ways to fix this problem:
      1. add back some special casing to avoid refcounting ZERO_PAGE
      2. per-node or per-cpu ZERO_PAGES
      3. remove the ZERO_PAGE completely
      
      I will argue for 3. The others should also fix the problem, but they
      result in more complex code than does 3, with little or no real benefit
      that I can see.
      
      Why? Inserting a ZERO_PAGE for anonymous read faults appears to be a
      false optimisation: if an application is performance critical, it would
      not be doing many read faults of new memory, or at least it could be
      expected to write to that memory soon afterwards. If cache or memory use
      is critical, it should not be working with a significant number of
      ZERO_PAGEs anyway (a more compact representation of zeroes should be
      used).
      
      As a sanity check -- mesuring on my desktop system, there are never many
      mappings to the ZERO_PAGE (eg. 2 or 3), thus memory usage here should not
      increase much without it.
      
      When running a make -j4 kernel compile on my dual core system, there are
      about 1,000 mappings to the ZERO_PAGE created per second, but about 1,000
      ZERO_PAGE COW faults per second (less than 1 ZERO_PAGE mapping per second
      is torn down without being COWed). So removing ZERO_PAGE will save 1,000
      page faults per second when running kbuild, while keeping it only saves
      less than 1 page clearing operation per second. 1 page clear is cheaper
      than a thousand faults, presumably, so there isn't an obvious loss.
      
      Neither the logical argument nor these basic tests give a guarantee of no
      regressions. However, this is a reasonable opportunity to try to remove
      the ZERO_PAGE from the pagefault path. If it is found to cause regressions,
      we can reintroduce it and just avoid refcounting it.
      
      The /dev/zero ZERO_PAGE usage and TLB tricks also get nuked.  I don't see
      much use to them except on benchmarks.  All other users of ZERO_PAGE are
      converted just to use ZERO_PAGE(0) for simplicity. We can look at
      replacing them all and maybe ripping out ZERO_PAGE completely when we are
      more satisfied with this solution.
      Signed-off-by: default avatarNick Piggin <npiggin@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus "snif" Torvalds <torvalds@linux-foundation.org>
      557ed1fa
    • Christoph Lameter's avatar
      SLUB: direct pass through of page size or higher kmalloc requests · aadb4bc4
      Christoph Lameter authored
      This gets rid of all kmalloc caches larger than page size.  A kmalloc
      request larger than PAGE_SIZE > 2 is going to be passed through to the page
      allocator.  This works both inline where we will call __get_free_pages
      instead of kmem_cache_alloc and in __kmalloc.
      
      kfree is modified to check if the object is in a slab page. If not then
      the page is freed via the page allocator instead. Roughly similar to what
      SLOB does.
      
      Advantages:
      - Reduces memory overhead for kmalloc array
      - Large kmalloc operations are faster since they do not
        need to pass through the slab allocator to get to the
        page allocator.
      - Performance increase of 10%-20% on alloc and 50% on free for
        PAGE_SIZEd allocations.
        SLUB must call page allocator for each alloc anyways since
        the higher order pages which that allowed avoiding the page alloc calls
        are not available in a reliable way anymore. So we are basically removing
        useless slab allocator overhead.
      - Large kmallocs yields page aligned object which is what
        SLAB did. Bad things like using page sized kmalloc allocations to
        stand in for page allocate allocs can be transparently handled and are not
        distinguishable from page allocator uses.
      - Checking for too large objects can be removed since
        it is done by the page allocator.
      
      Drawbacks:
      - No accounting for large kmalloc slab allocations anymore
      - No debugging of large kmalloc slab allocations.
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      aadb4bc4
    • Fengguang Wu's avatar
      filemap: convert some unsigned long to pgoff_t · 57f6b96c
      Fengguang Wu authored
      Convert some 'unsigned long' to pgoff_t.
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      57f6b96c
    • Fengguang Wu's avatar
      filemap: trivial code cleanups · b2c3843b
      Fengguang Wu authored
      - remove unused local next_index in do_generic_mapping_read()
      - remove a redudant page_cache_read() declaration
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b2c3843b
    • Fengguang Wu's avatar
      readahead: remove the limit max_sectors_kb imposed on max_readahead_kb · f2e18982
      Fengguang Wu authored
      Remove the size limit max_sectors_kb imposed on max_readahead_kb.
      
      The size restriction is unreasonable.  Especially when max_sectors_kb cannot
      grow larger than max_hw_sectors_kb, which can be rather small for some disk
      drives.
      
      Cc: Jens Axboe <jens.axboe@oracle.com>
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Acked-by: default avatarJens Axboe <jens.axboe@oracle.com>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f2e18982
    • Fengguang Wu's avatar
      readahead: remove several readahead macros · 535443f5
      Fengguang Wu authored
      Remove VM_MAX_CACHE_HIT, MAX_RA_PAGES and MIN_RA_PAGES.
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      535443f5
    • Fengguang Wu's avatar
      readahead: remove the local copy of ra in do_generic_mapping_read() · 7ff81078
      Fengguang Wu authored
      The local copy of ra in do_generic_mapping_read() can now go away.
      
      It predates readanead(req_size).  In a time when the readahead code was called
      on *every* single page.  Hence a local has to be made to reduce the chance of
      the readahead state being overwritten by a concurrent reader.  More details
      in: Linux: Random File I/O Regressions In 2.6
      <http://kerneltrap.org/node/3039>
      
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7ff81078
    • Fengguang Wu's avatar
      readahead: basic support of interleaved reads · 6b10c6c9
      Fengguang Wu authored
      This is a simplified version of the pagecache context based readahead.  It
      handles the case of multiple threads reading on the same fd and invalidating
      each others' readahead state.  It does the trick by scanning the pagecache and
      recovering the current read stream's readahead status.
      
      The algorithm works in a opportunistic way, in that it does not try to detect
      interleaved reads _actively_, which requires a probe into the page cache
      (which means a little more overhead for random reads).  It only tries to
      handle a previously started sequential readahead whose state was overwritten
      by another concurrent stream, and it can do this job pretty well.
      
      Negative and positive examples(or what you can expect from it):
      
      1) it cannot detect and serve perfect request-by-request interleaved reads
         right:
      	time	stream 1  stream 2
      	0 	1
      	1 	          1001
      	2 	2
      	3 	          1002
      	4 	3
      	5 	          1003
      	6 	4
      	7 	          1004
      	8 	5
      	9	          1005
      
      Here no single readahead will be carried out.
      
      2) However, if it's two concurrent reads by two threads, the chance of the
         initial sequential readahead be started is huge. Once the first sequential
         readahead is started for a stream, this patch will ensure that the readahead
         window continues to rampup and won't be disturbed by other streams.
      
      	time	stream 1  stream 2
      	0 	1
      	1 	2
      	2 	          1001
      	3 	3
      	4 	          1002
      	5 	          1003
      	6 	4
      	7 	5
      	8 	          1004
      	9 	6
      	10	          1005
      	11	7
      	12	          1006
      	13	          1007
      
      Here stream 1 will start a readahead at page 2, and stream 2 will start its
      first readahead at page 1003.  From then on the two streams will be served
      right.
      
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6b10c6c9
    • Fengguang Wu's avatar
      radixtree: introduce radix_tree_next_hole() · 6df8ba4f
      Fengguang Wu authored
      Introduce radix_tree_next_hole(root, index, max_scan) to scan radix tree for
      the first hole.  It will be used in interleaved readahead.
      
      The implementation is dumb and obviously correct.  It can help debug(and
      document) the possible smart one in future.
      
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6df8ba4f
    • Fengguang Wu's avatar
      readahead: combine file_ra_state.prev_index/prev_offset into prev_pos · f4e6b498
      Fengguang Wu authored
      Combine the file_ra_state members
      				unsigned long prev_index
      				unsigned int prev_offset
      into
      				loff_t prev_pos
      
      It is more consistent and better supports huge files.
      
      Thanks to Peter for the nice proposal!
      
      [akpm@linux-foundation.org: fix shift overflow]
      Cc: Peter Zijlstra <peterz@infradead.org>
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f4e6b498
    • Fengguang Wu's avatar
      readahead: mmap read-around simplification · 0bb7ba6b
      Fengguang Wu authored
      Fold file_ra_state.mmap_hit into file_ra_state.mmap_miss and make it an int.
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0bb7ba6b
    • Fengguang Wu's avatar
      readahead: compacting file_ra_state · 937085aa
      Fengguang Wu authored
      Use 'unsigned int' instead of 'unsigned long' for readahead sizes.
      
      This helps reduce memory consumption on 64bit CPU when a lot of files are
      opened.
      
      CC: Andi Kleen <andi@firstfloor.org>
      Signed-off-by: default avatarFengguang Wu <wfg@mail.ustc.edu.cn>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      937085aa
    • Jesper Juhl's avatar
      Clean up duplicate includes in mm/ · 43fac94d
      Jesper Juhl authored
      This patch cleans up duplicate includes in
      	mm/
      Signed-off-by: default avatarJesper Juhl <jesper.juhl@gmail.com>
      Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      43fac94d
    • Jesper Juhl's avatar
      Clean up duplicate includes in include/linux/memory_hotplug.h · 39e91e43
      Jesper Juhl authored
      This patch cleans up duplicate includes in
      	include/linux/memory_hotplug.h
      Signed-off-by: default avatarJesper Juhl <jesper.juhl@gmail.com>
      Acked-by: default avatarYasunori Goto <y-goto@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      39e91e43
    • Will Schmidt's avatar
      During VM oom condition, kill all threads in process group · dcca2bde
      Will Schmidt authored
      We have had complaints where a threaded application is left in a bad state
      after one of it's threads is killed when we hit a VM: out_of_memory
      condition.
      
      Killing just one of the process threads can leave the application in a bad
      state, whereas killing the entire process group would allow for the
      application to restart, or be otherwise handled, and makes it very obvious
      that something has gone wrong.
      
      This change allows the entire process group to be taken down, rather
      than just the one thread.
      Signed-off-by: default avatarWill Schmidt <will_schmidt@vnet.ibm.com>
      Cc: Richard Henderson <rth@twiddle.net>
      Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ian Molton <spyro@f2s.com>
      Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Hirokazu Takata <takata@linux-m32r.org>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Matthew Wilcox <willy@debian.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
      Cc: Richard Curnow <rc@rc0.org.uk>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Chris Zankel <chris@zankel.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dcca2bde
    • Adrian Bunk's avatar
      slub.c:early_kmem_cache_node_alloc() shouldn't be __init · 1cd7daa5
      Adrian Bunk authored
      WARNING: mm/built-in.o(.text+0x24bd3): Section mismatch: reference to .init.text:early_kmem_cache_node_alloc (between 'init_kmem_cache_nodes' and 'calculate_sizes')
      ...
      Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
      Acked-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1cd7daa5
    • Andy Whitcroft's avatar
      ppc64: SPARSEMEM_VMEMMAP support · d29eff7b
      Andy Whitcroft authored
      Enable virtual memmap support for SPARSEMEM on PPC64 systems.  Slice a 16th
      off the end of the linear mapping space and use that to hold the vmemmap.
      Uses the same size mapping as uses in the linear 1:1 kernel mapping.
      
      [pbadari@gmail.com: fix warning]
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarBadari Pulavarty <pbadari@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d29eff7b
    • David Miller's avatar
      SPARC64: SPARSEMEM_VMEMMAP support · 46644c24
      David Miller authored
      [apw@shadowen.org: style fixups]
      [apw@shadowen.org: vmemmap sparc64: convert to new config options]
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Acked-by: default avatarChristoph Lameter <clameter@sgi.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      46644c24
    • Christoph Lameter's avatar
      IA64: SPARSEMEM_VMEMMAP 16K page size support · ef229c5a
      Christoph Lameter authored
      Equip IA64 sparsemem with a virtual memmap.  This is similar to the existing
      CONFIG_VIRTUAL_MEM_MAP functionality for DISCONTIGMEM.  It uses a PAGE_SIZE
      mapping.
      
      This is provided as a minimally intrusive solution.  We split the 128TB
      VMALLOC area into two 64TB areas and use one for the virtual memmap.
      
      This should replace CONFIG_VIRTUAL_MEM_MAP long term.
      
      [apw@shadowen.org: convert to new helper based initialisation]
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ef229c5a
    • Christoph Lameter's avatar
      x86_64: SPARSEMEM_VMEMMAP 2M page size support · 0889eba5
      Christoph Lameter authored
      x86_64 uses 2M page table entries to map its 1-1 kernel space.  We also
      implement the virtual memmap using 2M page table entries.  So there is no
      additional runtime overhead over FLATMEM, initialisation is slightly more
      complex.  As FLATMEM still references memory to obtain the mem_map pointer and
      SPARSEMEM_VMEMMAP uses a compile time constant, SPARSEMEM_VMEMMAP should be
      superior.
      
      With this SPARSEMEM becomes the most efficient way of handling virt_to_page,
      pfn_to_page and friends for UP, SMP and NUMA on x86_64.
      
      [apw@shadowen.org: code resplit, style fixups]
      [apw@shadowen.org: vmemmap x86_64: ensure end of section memmap is initialised]
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: Andi Kleen <ak@suse.de>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0889eba5
    • Andy Whitcroft's avatar
      vmemmap: generify initialisation via helpers · 29c71111
      Andy Whitcroft authored
      Convert the common vmemmap population into initialisation helpers for use by
      architecture vmemmap populators.  All architecture implementing the
      SPARSEMEM_VMEMMAP variant supply an architecture specific vmemmap_populate()
      initialiser, which may make use of the helpers.
      
      This allows us to clean up and remove the initialisation Kconfig entries.
      With this patch there is a single SPARSEMEM_VMEMMAP_ENABLE Kconfig option to
      indicate use of that variant.
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      29c71111
    • Christoph Lameter's avatar
      Generic Virtual Memmap support for SPARSEMEM · 8f6aac41
      Christoph Lameter authored
      SPARSEMEM is a pretty nice framework that unifies quite a bit of code over all
      the arches.  It would be great if it could be the default so that we can get
      rid of various forms of DISCONTIG and other variations on memory maps.  So far
      what has hindered this are the additional lookups that SPARSEMEM introduces
      for virt_to_page and page_address.  This goes so far that the code to do this
      has to be kept in a separate function and cannot be used inline.
      
      This patch introduces a virtual memmap mode for SPARSEMEM, in which the memmap
      is mapped into a virtually contigious area, only the active sections are
      physically backed.  This allows virt_to_page page_address and cohorts become
      simple shift/add operations.  No page flag fields, no table lookups, nothing
      involving memory is required.
      
      The two key operations pfn_to_page and page_to_page become:
      
         #define __pfn_to_page(pfn)      (vmemmap + (pfn))
         #define __page_to_pfn(page)     ((page) - vmemmap)
      
      By having a virtual mapping for the memmap we allow simple access without
      wasting physical memory.  As kernel memory is typically already mapped 1:1
      this introduces no additional overhead.  The virtual mapping must be big
      enough to allow a struct page to be allocated and mapped for all valid
      physical pages.  This vill make a virtual memmap difficult to use on 32 bit
      platforms that support 36 address bits.
      
      However, if there is enough virtual space available and the arch already maps
      its 1-1 kernel space using TLBs (f.e.  true of IA64 and x86_64) then this
      technique makes SPARSEMEM lookups even more efficient than CONFIG_FLATMEM.
      FLATMEM needs to read the contents of the mem_map variable to get the start of
      the memmap and then add the offset to the required entry.  vmemmap is a
      constant to which we can simply add the offset.
      
      This patch has the potential to allow us to make SPARSMEM the default (and
      even the only) option for most systems.  It should be optimal on UP, SMP and
      NUMA on most platforms.  Then we may even be able to remove the other memory
      models: FLATMEM, DISCONTIG etc.
      
      [apw@shadowen.org: config cleanups, resplit code etc]
      [kamezawa.hiroyu@jp.fujitsu.com: Fix sparsemem_vmemmap init]
      [apw@shadowen.org: vmemmap: remove excess debugging]
      [apw@shadowen.org: simplify initialisation code and reduce duplication]
      [apw@shadowen.org: pull out the vmemmap code into its own file]
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8f6aac41
    • Andy Whitcroft's avatar
      sparsemem: record when a section has a valid mem_map · 540557b9
      Andy Whitcroft authored
      We have flags to indicate whether a section actually has a valid mem_map
      associated with it.  This is never set and we rely solely on the present bit
      to indicate a section is valid.  By definition a section is not valid if it
      has no mem_map and there is a window during init where the present bit is set
      but there is no mem_map, during which pfn_valid() will return true
      incorrectly.
      
      Use the existing SECTION_HAS_MEM_MAP flag to indicate the presence of a valid
      mem_map.  Switch valid_section{,_nr} and pfn_valid() to this bit.  Add a new
      present_section{,_nr} and pfn_present() interfaces for those users who care to
      know that a section is going to be valid.
      
      [akpm@linux-foundation.org: coding-syle fixes]
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      540557b9
    • Andy Whitcroft's avatar
      sparsemem: clean up spelling error in comments · cd881a6b
      Andy Whitcroft authored
      SPARSEMEM is a pretty nice framework that unifies quite a bit of code over all
      the arches.  It would be great if it could be the default so that we can get
      rid of various forms of DISCONTIG and other variations on memory maps.  So far
      what has hindered this are the additional lookups that SPARSEMEM introduces
      for virt_to_page and page_address.  This goes so far that the code to do this
      has to be kept in a separate function and cannot be used inline.
      
      This patch introduces a virtual memmap mode for SPARSEMEM, in which the memmap
      is mapped into a virtually contigious area, only the active sections are
      physically backed.  This allows virt_to_page page_address and cohorts become
      simple shift/add operations.  No page flag fields, no table lookups, nothing
      involving memory is required.
      
      The two key operations pfn_to_page and page_to_page become:
      
         #define __pfn_to_page(pfn)      (vmemmap + (pfn))
         #define __page_to_pfn(page)     ((page) - vmemmap)
      
      By having a virtual mapping for the memmap we allow simple access without
      wasting physical memory.  As kernel memory is typically already mapped 1:1
      this introduces no additional overhead.  The virtual mapping must be big
      enough to allow a struct page to be allocated and mapped for all valid
      physical pages.  This vill make a virtual memmap difficult to use on 32 bit
      platforms that support 36 address bits.
      
      However, if there is enough virtual space available and the arch already maps
      its 1-1 kernel space using TLBs (f.e.  true of IA64 and x86_64) then this
      technique makes SPARSEMEM lookups even more efficient than CONFIG_FLATMEM.
      FLATMEM needs to read the contents of the mem_map variable to get the start of
      the memmap and then add the offset to the required entry.  vmemmap is a
      constant to which we can simply add the offset.
      
      This patch has the potential to allow us to make SPARSMEM the default (and
      even the only) option for most systems.  It should be optimal on UP, SMP and
      NUMA on most platforms.  Then we may even be able to remove the other memory
      models: FLATMEM, DISCONTIG etc.
      
      The current aim is to bring a common virtually mapped mem_map to all
      architectures.  This should facilitate the removal of the bespoke
      implementations from the architectures.  This also brings performance
      improvements for most architecture making sparsmem vmemmap the more desirable
      memory model.  The ultimate aim of this work is to expand sparsemem support to
      encompass all the features of the other memory models.  This could allow us to
      drop support for and remove the other models in the longer term.
      
      Below are some comparitive kernbench numbers for various architectures,
      comparing default memory model against SPARSEMEM VMEMMAP.  All but ia64 show
      marginal improvement; we expect the ia64 figures to be sorted out when the
      larger mapping support returns.
      
      x86-64 non-NUMA
                   Base    VMEMAP    % change (-ve good)
      User        85.07     84.84    -0.26
      System      34.32     33.84    -1.39
      Total      119.38    118.68    -0.59
      
      ia64
                   Base    VMEMAP    % change (-ve good)
      User      1016.41   1016.93    0.05
      System      50.83     51.02    0.36
      Total     1067.25   1067.95    0.07
      
      x86-64 NUMA
                   Base   VMEMAP    % change (-ve good)
      User        30.77   431.73     0.22
      System      45.39    43.98    -3.11
      Total      476.17   475.71    -0.10
      
      ppc64
                   Base   VMEMAP    % change (-ve good)
      User       488.77   488.35    -0.09
      System      56.92    56.37    -0.97
      Total      545.69   544.72    -0.18
      
      Below are some AIM bencharks on IA64 and x86-64 (thank Bob).  The seems
      pretty much flat as you would expect.
      
      ia64 results 2 cpu non-numa 4Gb SCSI disk
      
      Benchmark	Version	Machine	Run Date
      AIM Multiuser Benchmark - Suite VII	"1.1"	extreme	Jun  1 07:17:24 2007
      
      Tasks	Jobs/Min	JTI	Real	CPU	Jobs/sec/task
      1	98.9		100	58.9	1.3	1.6482
      101	5547.1		95	106.0	79.4	0.9154
      201	6377.7		95	183.4	158.3	0.5288
      301	6932.2		95	252.7	237.3	0.3838
      401	7075.8		93	329.8	316.7	0.2941
      501	7235.6		94	403.0	396.2	0.2407
      600	7387.5		94	472.7	475.0	0.2052
      
      Benchmark	Version	Machine	Run Date
      AIM Multiuser Benchmark - Suite VII	"1.1"	vmemmap	Jun  1 09:59:04 2007
      
      Tasks	Jobs/Min	JTI	Real	CPU	Jobs/sec/task
      1	99.1		100	58.8	1.2	1.6509
      101	5480.9		95	107.2	79.2	0.9044
      201	6490.3		95	180.2	157.8	0.5382
      301	6886.6		94	254.4	236.8	0.3813
      401	7078.2		94	329.7	316.0	0.2942
      501	7250.3		95	402.2	395.4	0.2412
      600	7399.1		94	471.9	473.9	0.2055
      
      open power 710 2 cpu, 4 Gb, SCSI and configured physically
      
      Benchmark	Version	Machine	Run Date
      AIM Multiuser Benchmark - Suite VII	"1.1"	extreme	May 29 15:42:53 2007
      
      Tasks	Jobs/Min	JTI	Real	CPU	Jobs/sec/task
      1	25.7		100	226.3	4.3	0.4286
      101	1096.0		97	536.4	199.8	0.1809
      201	1236.4		96	946.1	389.1	0.1025
      301	1280.5		96	1368.0	582.3	0.0709
      401	1270.2		95	1837.4	771.0	0.0528
      501	1251.4		96	2330.1	955.9	0.0416
      601	1252.6		96	2792.4	1139.2	0.0347
      701	1245.2		96	3276.5	1334.6	0.0296
      918	1229.5		96	4345.4	1728.7	0.0223
      
      Benchmark	Version	Machine	Run Date
      AIM Multiuser Benchmark - Suite VII	"1.1"	vmemmap	May 30 07:28:26 2007
      
      Tasks	Jobs/Min	JTI	Real	CPU	Jobs/sec/task
      1	25.6		100	226.9	4.3	0.4275
      101	1049.3		97	560.2	198.1	0.1731
      201	1199.1		97	975.6	390.7	0.0994
      301	1261.7		96	1388.5	591.5	0.0699
      401	1256.1		96	1858.1	771.9	0.0522
      501	1220.1		96	2389.7	955.3	0.0406
      601	1224.6		96	2856.3	1133.4	0.0340
      701	1252.0		96	3258.7	1314.1	0.0298
      915	1232.8		96	4319.7	1704.0	0.0225
      
      amd64 2 2-core, 4Gb and SATA
      
      Benchmark	Version	Machine	Run Date
      AIM Multiuser Benchmark - Suite VII	"1.1"	extreme	Jun  2 03:59:48 2007
      
      Tasks	Jobs/Min	JTI	Real	CPU	Jobs/sec/task
      1	13.0		100	446.4	2.1	0.2173
      101	533.4		97	1102.0	110.2	0.0880
      201	578.3		97	2022.8	220.8	0.0480
      301	583.8		97	3000.6	332.3	0.0323
      401	580.5		97	4020.1	442.2	0.0241
      501	574.8		98	5072.8	558.8	0.0191
      600	566.5		98	6163.8	671.0	0.0157
      
      Benchmark	Version	Machine	Run Date
      AIM Multiuser Benchmark - Suite VII	"1.1"	vmemmap	Jun  3 04:19:31 2007
      
      Tasks	Jobs/Min	JTI	Real	CPU	Jobs/sec/task
      1	13.0		100	447.8	2.0	0.2166
      101	536.5		97	1095.6	109.7	0.0885
      201	567.7		97	2060.5	219.3	0.0471
      301	582.1		96	3009.4	330.2	0.0322
      401	578.2		96	4036.4	442.4	0.0240
      501	585.1		98	4983.2	555.1	0.0195
      600	565.5		98	6175.2	660.6	0.0157
      
      This patch:
      
      Fix some spelling errors.
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cd881a6b
    • Christoph Hellwig's avatar
      x86: optimize page faults like all other achitectures and kill notifier cruft · 74a0b576
      Christoph Hellwig authored
      x86(-64) are the last architectures still using the page fault notifier
      cruft for the kprobes page fault hook.  This patch converts them to the
      proper direct calls, and removes the now unused pagefault notifier bits
      aswell as the cruft in kprobes.c that was related to this mess.
      
      I know Andi didn't really like this, but all other architecture maintainers
      agreed the direct calls are much better and besides the obvious cruft
      removal a common way of dealing with kprobes across architectures is
      important aswell.
      
      [akpm@linux-foundation.org: build fix]
      [akpm@linux-foundation.org: fix sparc64]
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Cc: Andi Kleen <ak@suse.de>
      Cc: <linux-arch@vger.kernel.org>
      Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
      Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
      Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      74a0b576
    • Mike Travis's avatar
      Convert cpu_sibling_map to be a per cpu variable · d5a7430d
      Mike Travis authored
      Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu
      variable.  This saves sizeof(cpumask_t) * NR unused cpus.  Access is mostly
      from startup and CPU HOTPLUG functions.
      Signed-off-by: default avatarMike Travis <travis@sgi.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d5a7430d
    • Mike Travis's avatar
      x86: Convert cpu_core_map to be a per cpu variable · 08357611
      Mike Travis authored
      This is from an earlier message from 'Christoph Lameter':
      
          cpu_core_map is currently an array defined using NR_CPUS. This means that
          we overallocate since we will rarely really use maximum configured cpu.
      
          If we put the cpu_core_map into the per cpu area then it will be allocated
          for each processor as it comes online.
      
          This means that the core map cannot be accessed until the per cpu area
          has been allocated. Xen does a weird thing here looping over all processors
          and zeroing the masks that are not yet allocated and that will be zeroed
          when they are allocated. I commented the code out.
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarMike Travis <travis@sgi.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      08357611
    • Maik Broemme's avatar
      Add support for Wacom WACF007 and WACF008 to serial pnp driver · cc84634f
      Maik Broemme authored
      Notebook manufacturer seems to built a newer Wacom pen enabled tablet to
      recent tablet pcs which are not recognized by the serial pnp driver.
      
      Attached is a patch which makes the newer Wacom WACF007 and WACF008 tablets
      useable with the serial driver.  The device is fully compatible with it.
      Signed-off-by: default avatarMaik Broemme <mbroemme@plusserver.de>
      Cc: Andrey Panin <pazke@orbita1.ru>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cc84634f
    • Atsushi Nemoto's avatar
      serial_txx9: Use UPF_FIXED_PORT · 37a6c7d0
      Atsushi Nemoto authored
      The UPF_FIXED_PORT flags was introduced in 2.6.22 and it can be used
      instead of the driver specific verify_port routine.
      Signed-off-by: default avatarAtsushi Nemoto <anemo@mba.ocn.ne.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      37a6c7d0
    • Guennadi Liakhovetski's avatar
      wake up from a serial port · b3b708fa
      Guennadi Liakhovetski authored
      Enable wakeup from serial ports, make it run-time configurable over sysfs,
      e.g.,
      
      echo enabled > /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup
      
      Requires
      
      # CONFIG_SYSFS_DEPRECATED is not set
      
      Following suggestions from Alan and Russell moved the may_wake_up checks
      to serial_core.c. This time actually tested - it does even work. Could
      someone, please, verify, that put_device after device_find_child is
      correct?
      
      Also would be nice to test with a Natsemi UART, that can wake up the system,
      if such systems exist.
      
      For this you just have to apply the patch below, issue the above "echo"
      command to one of your Natsemi port, suspend and resume your system, and
      verify that your Natsemi port still works.  If you are actually capable of
      waking up the system from that port, would be nice to test that as well.
      Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Kay Sievers <kay.sievers@vrfy.org>
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b3b708fa
    • Guennadi Liakhovetski's avatar
      provide stubs for enable_irq_wake() and disable_irq_wake() · aa5346a2
      Guennadi Liakhovetski authored
      Provide {enable,disable}_irq_wakeup dummies for undefined
      cross-compilers for platforms without CONFIG_GENERIC_IRQ.
      
      Needed by wake-up-from-a-serial-port.patch
      Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      aa5346a2
    • Alan Cox's avatar
      8250_pci: Autodetect mainpine cards · bf0df636
      Alan Cox authored
      Add support for a whole range of boards. Some are partly autodetected but
      not fully correctly others (PCI Express notably) not at all. Stick all
      the right entries in.
      
      Thanks to Mainpine for information and testing.
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bf0df636
    • Atsushi Nemoto's avatar
      serial_txx9: cleanup includes · 7201863c
      Atsushi Nemoto authored
      Do not include some header files already indluded by serial_core.h.
      Signed-off-by: default avatarAtsushi Nemoto <anemo@mba.ocn.ne.jp>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Acked-by: default avatarAlan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7201863c
    • James Bottomley's avatar
      pcmcia: use DMA_MASK_NONE for the default for all pcmcia devices · 43d9f7fd
      James Bottomley authored
      Most non cardbus devices can't do dma, so flag them as such in the device
      creation routine.
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Tejun Heo <htejun@gmail.com>
      Cc: Natalie Protasevich <protasnb@gmail.com>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      43d9f7fd
    • James Bottomley's avatar
      introduce DMA_MASK_NONE as a signal for unable to do DMA · 32e8f702
      James Bottomley authored
      Some devices are incapable of DMA and need to be recognised as such.
      Introduce a NONE dma mask to facilitate this plus an inline function:
      is_device_dma_capable() to check this.
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Tejun Heo <htejun@gmail.com>
      Cc: Natalie Protasevich <protasnb@gmail.com>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      32e8f702
    • Eric Leblond's avatar
      Add support for PCMCIA card Sierra WIreless AC850 · 64da82ef
      Eric Leblond authored
      Add support for Sierra Wireless AC850 which has the same Ids as the
      AC710/750 but has a different firmware.
      
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      64da82ef
    • Daniel Ritz's avatar
      pcmcia: cistpl: use get_unaligned() in CIS parsing · dc0cf6a2
      Daniel Ritz authored
      Based on a patch by Haavard Skinnemoen posted to linux-pcmcia, but using
      static inlines for readability reasons.  this should fix PCMCIA an AVR32
      Signed-off-by: default avatarDaniel Ritz <daniel.ritz@gmx.ch>
      Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dc0cf6a2
    • Yoichi Yuasa's avatar
      move a few definitions to au1000_xxs1500.c · b5446b51
      Yoichi Yuasa authored
      Only a few definitions is in xxs1500.h .
      They can be move to au1000_xxs1500.c .
      
      [m.kozlowski@tuxland.pl: fix unbalanced parenthesis]
      Signed-off-by: default avatarYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Signed-off-by: default avatarMariusz Kozlowski <m.kozlowski@tuxland.pl>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b5446b51