- 24 Mar, 2006 40 commits
-
-
Arthur Othieno authored
floppy98 went out together with the rest of PC98 subarch. Remove stale Makefile entry that remained. Signed-off-by:
Arthur Othieno <apgo@patchbomb.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Hugh Dickins authored
SUSv3 says the shmdt() function shall fail with EINVAL if the value of shmaddr is not the data segment start address of a shared memory segment: our sys_shmdt needs to reject a shmaddr which is not page-aligned. Does it have the potential to break existing apps? Hugh says "sys_shmdt() just does the wrong (unexpected) thing with a misaligned address: it'll fail on what you might expect it to succeed on, and only succeed on what it should definitely fail on. "That is, I think it behaves as if shmaddr gets rounded up, when the only understandable behaviour would be if it rounded it down. "Which does mean you'd have to be devious to see anything but EINVAL from a misaligned shmaddr there, so it's not terribly important." Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Coywolf Qi Hunt authored
sb_set_blocksize() cleanup: make sb_set_blocksize() use blksize_bits(). Signed-off-by:
Coywolf Qi Hunt <qiyong@fc-cn.com> Signed-off-by:
-
Randy Dunlap authored
Remove all trailing tabs and spaces. No other changes. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Andrew Morton authored
Add two new linux-specific fadvise extensions(): LINUX_FADV_ASYNC_WRITE: start async writeout of any dirty pages between file offsets `offset' and `offset+len'. Any pages which are currently under writeout are skipped, whether or not they are dirty. LINUX_FADV_WRITE_WAIT: wait upon writeout of any dirty pages between file offsets `offset' and `offset+len'. By combining these two operations the application may do several things: LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk. LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE: push all of the currently dirty pages at the disk. LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE, LINUX_FADV_WRITE_WAIT: push all of the currently dirty pages at the disk, wait until they have been written. It should be noted that none of these operations write out the file's metadata. So unless the application is strictly performing overwrites of already-instantiated disk blocks, there are no guarantees here that the data will be available after a crash. To complete this suite of operations I guess we should have a "sync file metadata only" operation. This gives applications access to all the building blocks needed for all sorts of sync operations. But sync-metadata doesn't fit well with the fadvise() interface. Probably it should be a new syscall: sys_fmetadatasync(). The patch also diddles with the meaning of `endbyte' in sys_fadvise64_64(). It is made to represent that last affected byte in the file (ie: it is inclusive). Generally, all these byterange and pagerange functions are inclusive so we can easily represent EOF with -1. As Ulrich notes, these two functions are somewhat abusive of the fadvise() concept, which appears to be "set the future policy for this fd". But these commands are a perfect fit with the fadvise() impementation, and several of the existing fadvise() commands are synchronous and don't affect future policy either. I think we can live with the slight incongruity. Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by:
-
Andrew Morton authored
I had trouble understanding working out whether filemap_fdatawrite_range()'s `end' parameter describes the last-byte-to-be-written or the last-plus-one. Clarify that in comments. Signed-off-by:
-
Jan Beulich authored
As a foundation for reliable stack unwinding, this adds a config option (available to all architectures except IA64 and those where the module loader might have problems with the resulting relocations) to enable the generation of frame unwind information. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Jan Beulich authored
Provide abstraction for generating type and size information of assembly routines and data, while permitting architectures to override these defaults. Signed-off-by:
-
Alex Tomas authored
Under I/O load it may take up to a dozen seconds to read all group descriptors. This is what ext3_statfs() does. At the same time, we already maintain global numbers of free inodes/blocks. Why don't we use them instead of group reading and summing? Cc: Ravikiran G Thirumalai <kiran@scalex86.org> Signed-off-by:
-
Olaf Hering authored
Use the global define of pm_power_off Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
Pekka Enberg authored
Remove unused debugging macros from isofs. The referred debug functions do not exist in the kernel. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Paul Jackson authored
Remove a useless variable initialization in cpuset __cpuset_zone_allowed(). The local variable 'allowed' is unconditionally set before use, later on in the code, so does not need to be initialized. Not that it seems to matter to the code generated any, as the compiler optimizes out the superfluous assignment anyway. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Paul Jackson authored
The hook in the slab cache allocation path to handle cpuset memory spreading for tasks in cpusets with 'memory_spread_slab' enabled has a modest performance bug. The hook calls into the memory spreading handler alternate_node_alloc() if either of 'memory_spread_slab' or 'memory_spread_page' is enabled, even though the handler does nothing (albeit harmlessly) for the page case Fix - drop PF_SPREAD_PAGE from the set of flag bits that are used to trigger a call to alternate_node_alloc(). The page case is handled by separate hooks -- see the calls conditioned on cpuset_do_page_mem_spread() in mm/filemap.c Signed-off-by:
-
Paul Jackson authored
Drop the atomic_t marking on the cpuset static global cpuset_mems_generation. Since all access to it is guarded by the global manage_mutex, there is no need for further serialization of this value. Signed-off-by:
-
Paul Jackson authored
Remove a no longer needed test for NULL cpuset pointer, with a little comment explaining why the test isn't needed. Signed-off-by:
-
Paul Jackson authored
Change the kmem_cache_create calls for certain slab caches to support cpuset memory spreading. See the previous patches, cpuset_mem_spread, for an explanation of cpuset memory spreading, and cpuset_mem_spread_slab_cache for the slab cache support for memory spreading. The slab caches marked for now are: dentry_cache, inode_cache, some xfs slab caches, and buffer_head. This list may change over time. In particular, other file system types that are used extensively on large NUMA systems may want to allow for spreading their directory and inode slab cache entries. Signed-off-by:
-
Paul Jackson authored
The hooks in the slab cache allocator code path for support of NUMA mempolicies and cpuset memory spreading are in an important code path. Many systems will use neither feature. This patch optimizes those hooks down to a single check of some bits in the current tasks task_struct flags. For non NUMA systems, this hook and related code is already ifdef'd out. The optimization is done by using another task flag, set if the task is using a non-default NUMA mempolicy. Taking this flag bit along with the PF_SPREAD_PAGE and PF_SPREAD_SLAB flag bits added earlier in this 'cpuset memory spreading' patch set, one can check for the combination of any of these special case memory placement mechanisms with a single test of the current tasks task_struct flags. This patch also tightens up the code, to save a few bytes of kernel text space, and moves some of it out of line. Due to the nested inlines called from multiple places, we were ending up with three copies of this code, which once we get off the main code path (for local node allocation) seems a bit wasteful of instruction memory. Signed-off-by:
-
Paul Jackson authored
Provide the slab cache infrastructure to support cpuset memory spreading. See the previous patches, cpuset_mem_spread, for an explanation of cpuset memory spreading. This patch provides a slab cache SLAB_MEM_SPREAD flag. If set in the kmem_cache_create() call defining a slab cache, then any task marked with the process state flag PF_MEMSPREAD will spread memory page allocations for that cache over all the allowed nodes, instead of preferring the local (faulting) node. On systems not configured with CONFIG_NUMA, this results in no change to the page allocation code path for slab caches. On systems with cpusets configured in the kernel, but the "memory_spread" cpuset option not enabled for the current tasks cpuset, this adds a call to a cpuset routine and failed bit test of the processor state flag PF_SPREAD_SLAB. For tasks so marked, a second inline test is done for the slab cache flag SLAB_MEM_SPREAD, and if that is set and if the allocation is not in_interrupt(), this adds a call to to a cpuset routine that computes which of the tasks mems_allowed nodes should be preferred for this allocation. ==> This patch adds another hook into the performance critical code path to allocating objects from the slab cache, in the ____cache_alloc() chunk, below. The next patch optimizes this hook, reducing the impact of the combined mempolicy plus memory spreading hooks on this critical code path to a single check against the tasks task_struct flags word. This patch provides the generic slab flags and logic needed to apply memory spreading to a particular slab. A subsequent patch will mark a few specific slab caches for this placement policy. Signed-off-by: -
Paul Jackson authored
Rewrap the overly long source code lines resulting from the previous patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch contains only formatting changes, and no function change. Signed-off-by:
-
Paul Jackson authored
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD memory spreading. If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's in a cpuset with the 'memory_spread_slab' option enabled goes to allocate from such a slab cache, the allocations are spread evenly over all the memory nodes (task->mems_allowed) allowed to that task, instead of favoring allocation on the node local to the current cpu. The following inode and similar caches are marked SLAB_MEM_SPREAD: file cache ==== ===== fs/adfs/super.c adfs_inode_cache fs/affs/super.c affs_inode_cache fs/befs/linuxvfs.c befs_inode_cache fs/bfs/inode.c bfs_inode_cache fs/block_dev.c bdev_cache fs/cifs/cifsfs.c cifs_inode_cache fs/coda/inode.c coda_inode_cache fs/dquot.c dquot fs/efs/super.c efs_inode_cache fs/ext2/super.c ext2_inode_cache fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr fs/ext3/super.c ext3_inode_cache fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr fs/fat/cache.c fat_cache fs/fat/inode.c fat_inode_cache fs/freevxfs/vxfs_super.c vxfs_inode fs/hpfs/super.c hpfs_inode_cache fs/isofs/inode.c isofs_inode_cache fs/jffs/inode-v23.c jffs_fm fs/jffs2/super.c jffs2_i fs/jfs/super.c jfs_ip fs/minix/inode.c minix_inode_cache fs/ncpfs/inode.c ncp_inode_cache fs/nfs/direct.c nfs_direct_cache fs/nfs/inode.c nfs_inode_cache fs/ntfs/super.c ntfs_big_inode_cache_name fs/ntfs/super.c ntfs_inode_cache fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache fs/ocfs2/super.c ocfs2_inode_cache fs/proc/inode.c proc_inode_cache fs/qnx4/inode.c qnx4_inode_cache fs/reiserfs/super.c reiser_inode_cache fs/romfs/inode.c romfs_inode_cache fs/smbfs/inode.c smb_inode_cache fs/sysv/inode.c sysv_inode_cache fs/udf/super.c udf_inode_cache fs/ufs/super.c ufs_inode_cache net/socket.c sock_inode_cache net/sunrpc/rpc_pipe.c rpc_inode_cache The choice of which slab caches to so mark was quite simple. I marked those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache, inode_cache, and buffer_head, which were marked in a previous patch. Even though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same potentially large file system i/o related slab caches as we need for memory spreading. Given that the rule now becomes "wherever you would have used a SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain. Future file system writers will just copy one of the existing file system slab cache setups and tend to get it right without thinking. Signed-off-by: -
Paul Jackson authored
Change the page cache allocation calls to support cpuset memory spreading. See the previous patch, cpuset_mem_spread, for an explanation of cpuset memory spreading. On systems without cpusets configured in the kernel, this is no change. On systems with cpusets configured in the kernel, but the "memory_spread" cpuset option not enabled for the current tasks cpuset, this adds a call to a cpuset routine and failed bit test of the processor state flag PF_SPREAD_PAGE. On tasks in cpusets with "memory_spread" enabled, this adds a call to a cpuset routine that computes which of the tasks mems_allowed nodes should be preferred for this allocation. If memory spreading applies to a particular allocation, then any other NUMA mempolicy does not apply. Signed-off-by:
-
Paul Jackson authored
This patch provides the implementation and cpuset interface for an alternative memory allocation policy that can be applied to certain kinds of memory allocations, such as the page cache (file system buffers) and some slab caches (such as inode caches). The policy is called "memory spreading." If enabled, it spreads out these kinds of memory allocations over all the nodes allowed to a task, instead of preferring to place them on the node where the task is executing. All other kinds of allocations, including anonymous pages for a tasks stack and data regions, are not affected by this policy choice, and continue to be allocated preferring the node local to execution, as modified by the NUMA mempolicy. There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in kernel data structures. They are called 'memory_spread_page' and 'memory_spread_slab'. If the per-cpuset boolean flag file 'memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. The implementation is simple. Setting the cpuset flags 'memory_spread_page' or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or subsequently joins that cpuset. In subsequent patches, the page allocation calls for the affected page cache and slab caches are modified to perform an inline check for these flags, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. The cpuset_mem_spread_node() routine is also simple. It uses the value of a per-task rotor cpuset_mem_spread_rotor to select the next node in the current tasks mems_allowed to prefer for the allocation. This policy can provide substantial improvements for jobs that need to place thread local data on the corresponding node, but that need to access large file system data sets that need to be spread across the several nodes in the jobs cpuset in order to fit. Without this patch, especially for jobs that might have one thread reading in the data set, the memory allocation across the nodes in the jobs cpuset can become very uneven. A couple of Copyright year ranges are updated as well. And a couple of email addresses that can be found in the MAINTAINERS file are removed. Signed-off-by:
-
Paul Jackson authored
Replace pairs of calls to <atomic_inc, atomic_read>, with a single call atomic_inc_return, saving a few bytes of source and kernel text. Signed-off-by:
-
Paul Jackson authored
Since the test_bit() bit operator is boolean (return 0 or 1), the double not "!!" operations needed to convert a scalar (zero or not zero) to a boolean are not needed. Signed-off-by:
-
Christoph Lameter authored
If we get under some memory pressure in a cpuset (we only scan zones that are in the cpuset for memory) then kswapd is woken up for all zones. This patch only wakes up kswapd in zones that are part of the current cpuset. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
-
Paul E. McKenney authored
A long-running rcutorture test can overflow dmesg, so that the line containing the module parameters is lost. Although it is usually possible to retrieve this information from the log files, it is much better to just tag it onto the final success/failure line so that it may be easily found. This patch does just that. Signed-off-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
include/linux/platform.h contained nothing that was actually used except the default_idle() prototype, and is therefore removed by this patch. This patch does the following with the platform specific default_idle() functions on different architectures: - remove the unused function: - parisc - sparc64 - make the needlessly global function static: - arm - h8300 - m68k - m68knommu - s390 - v850 - x86_64 - add a prototype in asm/system.h: - cris - i386 - ia64 Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Patrick Mochel <mochel@digitalimplant.org> Acked-by:
Kyle McMartin <kyle@parisc-linux.org> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Jan Beulich authored
With internal Xen-enabled kernels we see the kernel's static per-cpu data area exceed the limit of 32k on x86-64, and even native x86-64 kernels get fairly close to that limit. I generally question whether it is reasonable to have data structures several kb in size allocated as per-cpu data when the space there is rather limited. The biggest arch-independent consumer is tvec_bases (over 4k on 32-bit archs, over 8k on 64-bit ones), which now gets converted to use dynamically allocated memory instead. Signed-off-by:
-
Adrian Bunk authored
Introduce a file fs/coda/coda_int.h with proper prototypes for some code. Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
-
Adrian Bunk authored
Add a proper prototype for ext2_get_parent(). Signed-off-by:
-
Adrian Bunk authored
- mux.c: v9fs_poll_mux() was inline but not static resuling in needless object size bloat - mux.c: remove all "inline"s: gcc should know best what to inline - #if 0 the following unused global functions: - 9p.c: v9fs_v9fs_t_flush() - conv.c: v9fs_create_tauth() - mux.c: v9fs_mux_rpcnb() Signed-off-by: -
Oleg Nesterov authored
__rcu_process_callbacks() disables interrupts to protect itself from call_rcu() which adds new entries to ->nxtlist. However we can check "->nxtlist != NULL" with interrupts enabled, we can't get "false positives" because call_rcu() can only change this condition from 0 to 1. Tested with rcutorture.ko. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Dipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Bart Samwel authored
When (integer) sysctl values are in either seconds or centiseconds, but represented internally as jiffies, the allowable value range is decreased. This patch adds range checks to the conversion routines. For values in seconds: maximum LONG_MAX / HZ. For values in centiseconds: maximum (LONG_MAX / HZ) * USER_HZ. (BTW, does anyone else feel that an interface in seconds should not be accepting negative values?) Signed-off-by:
Bart Samwel <bart@samwel.tk> Signed-off-by:
-
Bart Samwel authored
Make that the internal value for /proc/sys/vm/laptop_mode is stored as jiffies instead of seconds. Let the sysctl interface do the conversions, instead of doing on-the-fly conversions every time the value is used. Add a description of the fact that laptop_mode doubles as a flag and a timeout to the comment above the laptop_mode variable. Signed-off-by:
-
Bart Samwel authored
Make that the internal values for: /proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirty_expire_centisecs are stored as jiffies instead of centiseconds. Let the sysctl interface do the conversions with full precision using clock_t_to_jiffies, instead of doing overflow-sensitive on-the-fly conversions every time the values are used. Cons: apparent precision loss if HZ is not a multiple of 100, because of conversion back and forth. This is a common problem for all sysctl values that use proc_dointvec_userhz_jiffies. (There is only one other in-tree use, in net/core/neighbour.c.) Signed-off-by:
-
Andrew Morton authored
Reduce lock hold times in free_uid(). Cc: Ingo Molnar <mingo@elte.hu> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
