- 21 Jul, 2009 3 commits
-
-
Takashi Iwai authored
* fix/misc: ALSA: ca0106 - Fix the max capture buffer size ALSA: OSS sequencer should be initialized after snd_seq_system_client_init ALSA: sound/isa: convert nested spin_lock_irqsave to spin_lock
-
Takashi Iwai authored
* fix/hda: ALSA: hda - Fix pin-setup for Sony VAIO with STAC9872 codecs ALSA: hda - Add quirk for Gateway T6834c laptop ALSA: hda_codec: Check for invalid zero connections
-
Takashi Iwai authored
* fix/ctxfi: ALSA: ctxfi: Swapped SURROUND-SIDE channels on emu20k2
-
- 20 Jul, 2009 4 commits
-
-
Frank Roth authored
On Soundblaster X-FI Titanium with emu20k2 the SIDE and SURROUND channels were swapped and wrong. I double checked it with connector colors and creative soundblaster windows drivers. So I swapped them to the true order. Now "speaker-test -c6" and "speaker-test -c8" are working fine. Signed-off-by: Frank Roth <frashman@freenet.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The capture buffer size with 64kB seems broken with CA0106. At least, either the update timing or the DMA position is wrong, and this screws up pulseaudio badly. This patch restricts the max buffer size less than that to make life a bit easier. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
Takashi Iwai authored
The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
Hao Song authored
Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by: Hao Song <baritono.tux@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Jul, 2009 3 commits
-
-
Jaswinder Singh Rajput authored
When build SND_SEQUENCER in kernel then OSS sequencer(alsa_seq_oss_init) is initialized before System (snd_seq_system_client_init) which leads to memory leak : unreferenced object 0xf6b0e680 (size 256): comm "swapper", pid 1, jiffies 4294670753 backtrace: [<c108ac5c>] create_object+0x135/0x204 [<c108adfe>] kmemleak_alloc+0x26/0x4c [<c1087de2>] kmem_cache_alloc+0x72/0xff [<c126d2ac>] seq_create_client1+0x22/0x160 [<c126e3b6>] snd_seq_create_kernel_client+0x72/0xef [<c1485a05>] snd_seq_oss_create_client+0x86/0x142 [<c1485920>] alsa_seq_oss_init+0xf6/0x155 [<c1001059>] do_one_initcall+0x4f/0x111 [<c14655be>] kernel_init+0x115/0x166 [<c10032af>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff unreferenced object 0xf688a580 (size 64): comm "swapper", pid 1, jiffies 4294670753 backtrace: [<c108ac5c>] create_object+0x135/0x204 [<c108adfe>] kmemleak_alloc+0x26/0x4c [<c1087de2>] kmem_cache_alloc+0x72/0xff [<c126f964>] snd_seq_pool_new+0x1c/0xb8 [<c126d311>] seq_create_client1+0x87/0x160 [<c126e3b6>] snd_seq_create_kernel_client+0x72/0xef [<c1485a05>] snd_seq_oss_create_client+0x86/0x142 [<c1485920>] alsa_seq_oss_init+0xf6/0x155 [<c1001059>] do_one_initcall+0x4f/0x111 [<c14655be>] kernel_init+0x115/0x166 [<c10032af>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff unreferenced object 0xf6b0e480 (size 256): comm "swapper", pid 1, jiffies 4294670754 backtrace: [<c108ac5c>] create_object+0x135/0x204 [<c108adfe>] kmemleak_alloc+0x26/0x4c [<c1087de2>] kmem_cache_alloc+0x72/0xff [<c12725a0>] snd_seq_create_port+0x51/0x21c [<c126de50>] snd_seq_ioctl_create_port+0x57/0x13c [<c126d07a>] snd_seq_do_ioctl+0x4a/0x69 [<c126d0de>] snd_seq_kernel_client_ctl+0x33/0x49 [<c1485a74>] snd_seq_oss_create_client+0xf5/0x142 [<c1485920>] alsa_seq_oss_init+0xf6/0x155 [<c1001059>] do_one_initcall+0x4f/0x111 [<c14655be>] kernel_init+0x115/0x166 [<c10032af>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff The correct order should be : System (snd_seq_system_client_init) should be initialized before OSS sequencer(alsa_seq_oss_init) which is equivalent to : 1. insmod sound/core/seq/snd-seq-device.ko 2. insmod sound/core/seq/snd-seq.ko 3. insmod sound/core/seq/snd-seq-midi-event.ko 4. insmod sound/core/seq/oss/snd-seq-oss.ko Including sound/core/seq/oss/Makefile after other seq modules fixes the ordering and memory leak. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Julia Lawall authored
If spin_lock_irqsave is called twice in a row with the same second argument, the interrupt state at the point of the second call overwrites the value saved by the first call. Indeed, the second call does not need to save the interrupt state, so it is changed to a simple spin_lock. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression lock1,lock2; expression flags; @@ *spin_lock_irqsave(lock1,flags) ... when != flags *spin_lock_irqsave(lock2,flags) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
To prevent "Too many connections" message and the error path for some HDMI codecs (which makes onboard audio unusable), check for invalid zero connections for CONNECT_LIST verb. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Jul, 2009 4 commits
-
-
Takashi Iwai authored
* fix/usb-audio: sound: usb-audio: add workaround for Blue Microphones devices
-
Takashi Iwai authored
* fix/misc: ALSA: riptide - proper handling of pci_register_driver for joystick
-
Takashi Iwai authored
* fix/hda: ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checking
-
Takashi Iwai authored
* fix/asoc: ASoC: Fix NULL pointer dereference in __pxa2xx_pcm_hw_free
-
- 15 Jul, 2009 2 commits
-
-
Jaswinder Singh Rajput authored
We need to check returning error for pci_register_driver(&joystick_driver) On failure, we should unregister formerly registered audio drivers This also fixed the compiler warning : CC [M] sound/pci/riptide/riptide.o sound/pci/riptide/riptide.c: In function ‘alsa_card_riptide_init’: sound/pci/riptide/riptide.c:2200: warning: ignoring return value of ‘__pci_register_driver’, declared with attribute warn_unused_result Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
Blue Microphones USB devices have an alternate setting that sends two channels of data to the computer. Unfortunately, the descriptors of that altsetting have a wrong channel setting, which means that any recorded data from such a device has twice the sample rate from what would be expected. This patch adds a workaround to ignore that altsetting. Since these devices have only one actual channel, no data is lost. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Jul, 2009 1 commit
-
-
Linus Torvalds authored
-
- 13 Jul, 2009 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix race between write_metadata_buffer and get_write_access ext4: Fix ext4_mb_initialize_context() to initialize all fields ext4: fix null handler of ioctls in no journal mode ext4: Fix buffer head reference leak in no-journal mode ext4: Move __ext4_journalled_writepage() to avoid forward declaration ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation ext4: Don't look at buffer_heads outside i_size. ext4: Fix goal inum check in the inode allocator ext4: fix no journal corruption with locale-gen ext4: Calculate required journal credits for inserting an extent properly ext4: Fix truncation of symlinks after failed write jbd2: Fix a race between checkpointing code and journal_get_write_access() ext4: Use rcu_barrier() on module unload. ext4: naturally align struct ext4_allocation_request ext4: mark several more functions in mballoc.c as noinline ext4: Fix potential reclaim deadlock when truncating partial block jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region ext4: Fix type warning on 64-bit platforms in tracing events header
-
dingdinghua authored
The function jbd2_journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in) too early; this could potentially allow another thread to call get_write_access on the buffer head, modify the data, and dirty it, and allowing the wrong data to be written into the journal. Fortunately, if we lose this race, the only time this will actually cause filesystem corruption is if there is a system crash or other unclean shutdown of the system before the next commit can take place. Signed-off-by: dingdinghua <dingdinghua85@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME Staging: rtl8192su: convert to net_device_ops Staging: serqt_usb2: declare qt_open static in serqt_usb2 Staging: serqt_usb2: fix qt_close parameters in serqt_usb2 Staging: comedi: jr3_pci.c: add required includes Staging: meilhaus: add email address to TODO Staging: rspiusb: use NULL virtual address instead of a bogus one Staging: vt6655: compile fix Staging: rt2870: Add USB ID for Sitecom WL-608
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: wm97xx_batery: replace driver_data with dev_get_drvdata() omap: video: remove direct access of driver_data Sound: remove direct access of driver_data driver model: fix show/store prototypes in doc. Firmware: firmware_class, fix lock imbalance Driver Core: remove BUS_ID_SIZE sparc: remove driver-core BUS_ID_SIZE partitions: fix broken uevent_suppress conversion devres: WARN() and return, don't crash on device_del() of uninitialized device
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits) USB: otg: fix module reinsert issue USB: handle zero-length usbfs submissions correctly USB: EHCI: report actual_length for iso transfers USB: option: remove unnecessary and erroneous code USB: cypress_m8: remove invalid Clear-Halt USB: musb_host: undo incorrect change in musb_advance_schedule() USB: fix LANGID=0 regression USB: serial: sierra driver id_table additions USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. USB: fix race leading to a write after kfree in usbfs USB: Sierra: fix oops upon device close USB: option.c: add A-Link 3GU device id USB: Serial: Add support for Arkham Technology adapters USB: Fix option_ms regression in 2.6.31-rc2 USB: gadget audio: select SND_PCM USB: ftdi: support NDI devices Revert USB: usbfs: deprecate and hide option for !embedded USB: usb.h: fix kernel-doc notation USB: RNDIS gadget, fix issues talking from PXA USB: serial: FTDI with product code FB80 and vendor id 0403 ...
-
Dave Kleikamp authored
JFS hasn't really been supported for a while. It's still maintained, but saying it's supported is a stretch. Updating my preferred email address as well. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Weiyi authored
Remove duplicated #include('s) in arch/mn10300/kernel/sys_mn10300.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Commit 405f5571 ("headers: smp_lock.h redux") broke the build of two staging drivers. Fix them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Theodore Ts'o authored
Pavel Roskin pointed out that kmemcheck indicated that ext4_mb_store_history() was accessing uninitialized values of ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc history. Fix this by initializing the entire structure to all zeros first. Also, two fields were getting doubly initialized by the caller of ext4_mb_initialize_context, so remove them for efficiency's sake. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Peng Tao authored
The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not flush the journal in no_journal mode. Otherwise, running resize2fs on a mounted no_journal partition triggers the following error messages: BUG: unable to handle kernel NULL pointer dereference at 00000014 IP: [<c039d282>] _spin_lock+0x8/0x19 *pde = 00000000 Oops: 0002 [#1] SMP Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Curt Wohlgemuth authored
We found a problem with buffer head reference leaks when using an ext4 partition without a journal. In particular, calls to ext4_forget() would not to a brelse() on the input buffer head, which will cause pages they belong to to not be reclaimable. Further investigation showed that all places where ext4_journal_forget() and ext4_journal_revoke() are called are subject to the same problem. The patch below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit release of the buffer head when the journal handle isn't valid. Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 12 Jul, 2009 12 commits
-
-
Ajay Kumar Gupta authored
Platform_device instance (pd) is not set to NULL in usb_nop_xceiv_unregister() causing usb_nop_xceiv_register() to fail during module reinsert. From: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Babu Ravi <ravibabu@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
-
Alan Stern authored
This patch (as1262) fixes a bug in usbfs: It refuses to accept zero-length transfers, and it insists that the buffer pointer be valid even if there is no data being transferred. The patch also consolidates a bunch of repetitive access_ok() checks into a single check, which incidentally fixes the lack of such a check for Isochronous URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1259b) makes ehci-hcd return the total number of bytes transferred in urb->actual_length for Isochronous transfers. Until now, the actual_length value was unaccountably left at 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1264) removes a bunch of unnecessary and erroneous stuff from the option USB-serial driver. Clearly there's no need to verify that the device pointer stored in the URBs is right or to store the same pointer over again. After all, the pointer can't change once it has been set up. There's also no need to call usb_clear_halt for the IN endpoint multiple times -- in fact, doing so is an error since every time after the first there will be active URBs queued for that endpoint. Since the Clear-Halts don't appear to be needed at all, the patch simply removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1265) removes an erroneous call to usb_clear_halt from the cypress_m8 driver. The call isn't valid because it is made from interrupt context whereas usb_clear_halt is a blocking routine. Presumably the code has never been executed; if it did it would cause an oops. So instead treat -EPIPE like any other sort of unexplained error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
Commit c9cd06b3 (musb_host: refactor URB giveback) included due to my overlook the change incorrect in the context of the current kernel -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Mack authored
commit b7af0bb2 ("USB: allow malformed LANGID descriptors") broke support for devices without string descriptor support. Reporting string descriptors is optional to USB devices, and a device lets us know it can't deal with strings by responding to the LANGID request with a STALL token. The kernel handled that correctly before b7af0bb2 came in, but failed hard if the LANGID was reported but broken. More than that, if a device was not able to provide string descriptors, the LANGID was retrieved over and over again at each string read request. This patch changes the behaviour so that a) the LANGID is only queried once b) devices which can't handle string requests are not asked again c) devices with malformed LANGID values have a sane fallback to 0x0409 Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Elina Pasheva authored
- Updated the id_table with all devices that Sierra Wireless currently support - Re-ordered the contents of the id_table for better readability Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Krzysztof Halasa authored
Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
this fixes a race between async_completed() and proc_reapurbnonblock(). CPU A CPU B spin_lock(&ps->lock); list_move_tail(&as->asynclist, &ps->async_completed); spin_unlock(&ps->lock); if (!(as = async_getcompleted(ps))) return -EAGAIN; return processcompl(as, (void __user * __user *)arg); processcompl() calls free_async() which calls kfree(as) as->status = urb->status; if (as->signr) { sinfo.si_signo = as->signr; sinfo.si_errno = as->status; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = as->userurb; kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid, as->euid, as->secid); } snoop(&urb->dev->dev, "urb complete\n"); snoop_urb(urb, as->userurb); write after kfree Signed-off-by: Oliver Neukum <oliver@neukum.org>
-
Alan Stern authored
This patch (as1263) fixes a mixup that occurred when conflicting patches for the sierra driver were merged incorrectly. The former sierra_shutdown routine should have been become sierra_release, not sierra_disconnect. The symptom this fixes is an oops when the device file is closed after a Sierra device has been unplugged (Bugzilla #13675). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Peter Naulls <peter@mushroomnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Anssi Hannula authored
Add A-Link 3GU device id 1e0e:9200 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 1e0e:f000 device and must be switched to 1e0e:9200 mode either by using "eject CD" or usb_modeswitch. For the record, the device does not work with generic usbserial driver (usb disconnect when sending the ATDT command). Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-