- 16 Oct, 2007 40 commits
-
-
Keita Maehara authored
These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The second one contains following changes: - A chip-specific SPDIF support for YMF743 (It doesn't have AC97 standard SPDIF registers seen on YMF753). - The implementation for 'IEC958 Playback Source' and 'IEC958 Mute' are identical to the ones for YMF753. But there is no 'IEC958 Output Pin' for YMF743. Signed-off-by:
Keita Maehara <maehara@debian.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Keita Maehara authored
These patches enable some YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The first one contains only cosmetic changes to share a few YMF753-specific symbols with YMF743. Signed-off-by:
-
Rene Herman authored
Replace schedule_timeout() with schedule_timeout_uninterruptible() to avoid signals in loop. Signed-off-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
-
Rene Herman authored
Fix schedule_timeout() use in alsa-kernel. Mostly just schedule_timeout(1) --> schedule_timeout_uninterruptible(1) The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main, delete a superfluous set_current_state() and in soc/soc-dapm.c replace an _interruptible with _uninterruptible in some debug code; it's not waiting for signals. Signed-off-by: Rene Herman <rene.herman> Signed-off-by:
-
Matthew Ranostay authored
More laptop BIOS changes the subsystem id for STAC9205 cards if the microphone is toggled on/off in the settings. The patch removes the old STAC_9205_M43xx and use STAC_9205_DELL_M43. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
Added the description about power-saving mode on AC97 and HD-audio drivers. Signed-off-by:
-
Takashi Iwai authored
Added CONFIG_SND_AC97_POWER_SAVE_DEFAULT and CONFIG_SND_HDA_POWER_SAVE_DEFAULT Kconfig options as the default values for power-saving mode of AC97 and HD-audio drivers, respectively. Signed-off-by:
-
Krzysztof Helt authored
This patch adds support for audio part of the Ensoniq SoundScape VIVO cards. The MIDI part is not supported. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Takashi Iwai authored
The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through pnp and put their on-chip OPL3 at +8. The driver assumes the provided value is the ALBase (OPL3 address) though and checks for an OPL4 at -8, which means that simply adding 8 to the pnp provides value works to fix detection of both OPL3 and OPL4. Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and 925 (together all OPTi ISA-PnP chips) by me. Signed-off-by; Rene Herman <rene.herman@gmail.com> Acked-by:
-
Takashi Iwai authored
Add descriptions for new module options of snd-sscape driver, wss_port and dma2. Signed-off-by:
-
Krzysztof Helt authored
This patch adds second DMA channel and WSS port settings to the sscape driver. Also, it adds internal card type setting. The Ensoniq SoundScape VIVO PnP id is added but not handled yet. Signed-off-by:
-
Daniel Mack authored
This patch adds support for Native Instrument's upcoming RigKontrol3 sound interface. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Krzysztof Helt authored
This patch zeroes buffer for the card name and fixes incorrect jump in the probe function. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes MPU-401 irq values list in documentation. Signed-off-by:
-
Matthias Kaehlcke authored
Routines for effect processor FX8010: Use list_for_each_entry instead of list_for_each Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
-
Matthias Kaehlcke authored
Intel HD Audio: Use list_for_each_entry(_safe) instead of list_for_each(_safe) Signed-off-by:
-
Matthias Kaehlcke authored
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of list_for_each Signed-off-by:
-
Krzysztof Helt authored
This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib. Acked-by:
-
Andrew Morton authored
sound/isa/sc6000.c: In function 'sc6000_dsp_reset': sound/isa/sc6000.c:270: error: implicit declaration of function 'udelay' sound/isa/sc6000.c: In function 'sc6000_init_mss': sound/isa/sc6000.c:327: error: implicit declaration of function 'msleep' {standard input}: Assembler messages: Signed-off-by:Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Giuliano Pochini authored
This patch adds a barrier() to prevent the compiler from moving the read outside of the loop. It also fixes a comment. Signed-off-by:
Giuliano Pochini <pochini@shiny.it> Signed-off-by:
-
Tobin Davis authored
This patch adds support for the Asus M2A-VM HDMI and Abit IP35-PRO motherboards. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Tobin Davis authored
I had a request for a 4 channel mode. This should implement front and surround outputs, leaving the 3rd plug for mic input. Signed-off-by:
-
Clemens Ladisch authored
When playing multichannel data, the rear channels can get distorted if the last sample of the last played stereo stream was not zero. To avoid this, add a hack to play a few silence samples after the stream is stopped. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
Remove some unused field from the struct cmipci_pcm, and change the type of some others to save some space. Signed-off-by:
-
Clemens Ladisch authored
When using one of the double sampling rates, use half the sample rate to look up in the rates[] table, otherwise we stumble over the BUG(). Signed-off-by:
-
Clemens Ladisch authored
By reorganizing the code that sets the CHB3DxC bits we can not only simplify this code but also fix the bug where the CHB3D8C bit was not reset when playing a stereo stream after a 7.1 stream. Signed-off-by:
-
Clemens Ladisch authored
Disallow playback of five channels because the hardware does not support it (or nobody knows how to do it). Signed-off-by:
-
Clemens Ladisch authored
Move the code that enables 96 kHz out of the if() that checks for availability of both DMA channels so that it is enabled even when another stream is playing on the front channels. Signed-off-by:
-
Clemens Ladisch authored
Initialize the registers at 0x90 and 0x91 with some undocumented values. Signed-off-by:
-
Clemens Ladisch authored
When the chip is initialized, reset it. Signed-off-by:
-
Clemens Ladisch authored
Show a dump of all registers in the 0x00-0x27 and 0x90-0x93 ranges in the 'cmipci' proc file. Signed-off-by:
-
Clemens Ladisch authored
Update comments for many register symbols, add some new register symbols, and rename a few ones. Signed-off-by:
-
Clemens Ladisch authored
Use the proper value for the bit that identifies chip version 37. Signed-off-by:
-
Clemens Ladisch authored
Add an 'unknown' board type so that it is possible to differentiate between unknown and generic boards. Signed-off-by:
-
Clemens Ladisch authored
Add a quirk to detect the MIDI port on the M-Audio Ozone Academic. Signed-off-by:
-
Jaroslav Kysela authored
Signed-off-by: -
Takashi Iwai authored
Remove superfluous volatile prefix in the communication struct definition. This eventually fixes the compile warnings with the recent gcc, too. Signed-off-by:
-
Takashi Iwai authored
Added the description of the new sc6000 driver to ALSA-Configuration.txt. Signed-off-by:
-
Krzysztof Helt authored
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver. This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio Plus True 16). Signed-off-by:
-
Danny Tholen authored
When modem is disabled in the BIOS, detection of the number of codecs always fails after booting if STATESTS is not cleared first. This patch fixes this problem and also adds an error check in a place where a read error would lead to a very large number of pointless loops. Signed-off-by:
Danny Tholen <obiwan@mailmij.org> Signed-off-by:
-
