- 12 Mar, 2010 40 commits
-
-
KAMEZAWA Hiroyuki authored
Presently, move_task does "batched" precharge. Because res_counter or css's refcnt are not-scalable jobs for memcg, try_charge_().. tend to be done in batched manner if allowed. Now, softlimit and threshold check their event counter in try_charge, but the charge is not a per-page event. And event counter is not updated at charge(). Moreover, precharge doesn't pass "page" to try_charge() and softlimit tree will be never updated until uncharge() causes an event." So the best place to check the event counter is commit_charge(). This is per-page event by its nature. This patch move checks to there. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
When per-cpu counter for memcg was implemneted, dynamic percpu allocator was not very good. But now, we have good one and useful macros. This patch replaces memcg's private percpu counter implementation with generic dynamic percpu allocator. The benefits are - We can remove private implementation. - The counters will be NUMA-aware. (Current one is not...) - This patch makes sizeof struct mem_cgroup smaller. Then, struct mem_cgroup may be fit in page size on small config. - About basic performance aspects, see below. [Before] # size mm/memcontrol.o text data bss dec hex filename 24373 2528 4132 31033 7939 mm/memcontrol.o [page-fault-throuput test on 8cpu/SMP in root cgroup] # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 45878618 page-faults ( +- 0.110% ) 602635826 cache-misses ( +- 0.105% ) 61.005373262 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 13.14 [After] #size mm/memcontrol.o text data bss dec hex filename 23913 2528 4132 30573 776d mm/memcontrol.o # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8 Performance counter stats for './multi-fault-fork 8' (5 runs): 48179400 page-faults ( +- 0.271% ) 588628407 cache-misses ( +- 0.136% ) 61.004615021 seconds time elapsed ( +- 0.004% ) Then cache-miss/page fault = 12.22 Text size is reduced. This performance improvement is not big and will be invisible in real world applications. But this result shows this patch has some good effect even on (small) SMP. Here is a test program I used. 1. fork() processes on each cpus. 2. do page fault repeatedly on each process. 3. after 60secs, kill all childredn and exit. (3 is necessary for getting stable data, this is improvement from previous one.) #define _GNU_SOURCE #include <stdio.h> #include <sched.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <signal.h> #include <stdlib.h> /* * For avoiding contention in page table lock, FAULT area is * sparse. If FAULT_LENGTH is too large for your cpus, decrease it. */ #define FAULT_LENGTH (2 * 1024 * 1024) #define PAGE_SIZE 4096 #define MAXNUM (128) void alarm_handler(int sig) { } void *worker(int cpu, int ppid) { void *start, *end; char *c; cpu_set_t set; int i; CPU_ZERO(&set); CPU_SET(cpu, &set); sched_setaffinity(0, sizeof(set), &set); start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (start == MAP_FAILED) { perror("mmap"); exit(1); } end = start + FAULT_LENGTH; pause(); //fprintf(stderr, "run%d", cpu); while (1) { for (c = (char*)start; (void *)c < end; c += PAGE_SIZE) *c = 0; madvise(start, FAULT_LENGTH, MADV_DONTNEED); } return NULL; } int main(int argc, char *argv[]) { int num, i, ret, pid, status; int pids[MAXNUM]; if (argc < 2) return 0; setpgid(0, 0); signal(SIGALRM, alarm_handler); num = atoi(argv[1]); pid = getpid(); for (i = 0; i < num; ++i) { ret = fork(); if (!ret) { worker(i, pid); exit(0); } pids[i] = ret; } sleep(1); kill(-pid, SIGALRM); sleep(60); for (i = 0; i < num; i++) kill(pids[i], SIGKILL); for (i = 0; i < num; i++) waitpid(pids[i], &status, 0); return 0; } Signed-off-by: -
Kirill A. Shutemov authored
s/mem_cgroup_print_mem_info/mem_cgroup_print_oom_info/ Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Kirill A. Shutemov authored
It allows to register multiple memory and memsw thresholds and gets notifications when it crosses. To register a threshold application need: - create an eventfd; - open memory.usage_in_bytes or memory.memsw.usage_in_bytes; - write string like "<event_fd> <memory.usage_in_bytes> <threshold>" to cgroup.event_control. Application will be notified through eventfd when memory usage crosses threshold in any direction. It's applicable for root and non-root cgroup. It uses stats to track memory usage, simmilar to soft limits. It checks if we need to send event to userspace on every 100 page in/out. I guess it's good compromise between performance and accuracy of thresholds. [akpm@linux-foundation.org: coding-style fixes] [nishimura@mxp.nes.nec.co.jp: fix documentation merge issue] Signed-off-by:
-
Kirill A. Shutemov authored
Instead of incrementing counter on each page in/out and comparing it with constant, we set counter to constant, decrement counter on each page in/out and compare it with zero. We want to make comparing as fast as possible. On many RISC systems (probably not only RISC) comparing with zero is more effective than comparing with a constant, since not every constant can be immediate operand for compare instruction. Also, I've renamed MEM_CGROUP_STAT_EVENTS to MEM_CGROUP_STAT_SOFTLIMIT, since really it's not a generic counter. Signed-off-by:
-
Kirill A. Shutemov authored
Helper to get memory or mem+swap usage of the cgroup. Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
-
Kirill A. Shutemov authored
This patchset introduces eventfd-based API for notifications in cgroups and implements memory notifications on top of it. It uses statistics in memory controler to track memory usage. Output of time(1) on building kernel on tmpfs: Root cgroup before changes: make -j2 506.37 user 60.93s system 193% cpu 4:52.77 total Non-root cgroup before changes: make -j2 507.14 user 62.66s system 193% cpu 4:54.74 total Root cgroup after changes (0 thresholds): make -j2 507.13 user 62.20s system 193% cpu 4:53.55 total Non-root cgroup after changes (0 thresholds): make -j2 507.70 user 64.20s system 193% cpu 4:55.70 total Root cgroup after changes (1 thresholds, never crossed): make -j2 506.97 user 62.20s system 193% cpu 4:53.90 total Non-root cgroup after changes (1 thresholds, never crossed): make -j2 507.55 user 64.08s system 193% cpu 4:55.63 total This patch: Introduce the write-only file "cgroup.event_control" in every cgroup. To register new notification handler you need: - create an eventfd; - open a control file to be monitored. Callbacks register_event() and unregister_event() must be defined for the control file; - write "<event_fd> <control_fd> <args>" to cgroup.event_control. Interpretation of args is defined by control file implementation; eventfd will be woken up by control file implementation or when the cgroup is removed. To unregister notification handler just close eventfd. If you need notification functionality for a control file you have to implement callbacks register_event() and unregister_event() in the struct cftype. [kamezawa.hiroyu@jp.fujitsu.com: Kconfig fix] Signed-off-by:
-
Daisuke Nishimura authored
Try to reduce overheads in moving swap charge by: - Adds a new function(__mem_cgroup_put), which takes "count" as a arg and decrement mem->refcnt by "count". - Removed res_counter_uncharge, css_put, and mem_cgroup_put from the path of moving swap account, and consolidate all of them into mem_cgroup_clear_mc. We cannot do that about mc.to->refcnt. These changes reduces the overhead from 1.35sec to 0.9sec to move charges of 1G anonymous memory(including 500MB swap) in my test environment. Signed-off-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
-
Daisuke Nishimura authored
This patch is another core part of this move-charge-at-task-migration feature. It enables moving charges of anonymous swaps. To move the charge of swap, we need to exchange swap_cgroup's record. In current implementation, swap_cgroup's record is protected by: - page lock: if the entry is on swap cache. - swap_lock: if the entry is not on swap cache. This works well in usual swap-in/out activity. But this behavior make the feature of moving swap charge check many conditions to exchange swap_cgroup's record safely. So I changed modification of swap_cgroup's recored(swap_cgroup_record()) to use xchg, and define a new function to cmpxchg swap_cgroup's record. This patch also enables moving charge of non pte_present but not uncharged swap caches, which can be exist on swap-out path, by getting the target pages via find_get_page() as do_mincore() does. [kosaki.motohiro@jp.fujitsu.com: fix ia64 build] [akpm@linux-foundation.org: fix typos] Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Daisuke Nishimura authored
This move-charge-at-task-migration feature has extra charges on "to"(pre-charges) and "from"(left-over charges) during moving charge. This means unnecessary oom can happen. This patch tries to avoid such oom. Signed-off-by:
-
Daisuke Nishimura authored
Try to reduce overheads in moving charge by: - Instead of calling res_counter_uncharge() against the old cgroup in __mem_cgroup_move_account() everytime, call res_counter_uncharge() at the end of task migration once. - removed css_get(&to->css) from __mem_cgroup_move_account() because callers should have already called css_get(). And removed css_put(&to->css) too, which was called by callers of move_account on success of move_account. - Instead of calling __mem_cgroup_try_charge(), i.e. res_counter_charge(), repeatedly, call res_counter_charge(PAGE_SIZE * count) in can_attach() if possible. - Instead of calling css_get()/css_put() repeatedly, make use of coalesce __css_get()/__css_put() if possible. These changes reduces the overhead from 1.7sec to 0.6sec to move charges of 1G anonymous memory in my test environment. Signed-off-by:
-
Daisuke Nishimura authored
This patch is the core part of this move-charge-at-task-migration feature. It implements functions to move charges of anonymous pages mapped only by the target task. Implementation: - define struct move_charge_struct and a valuable of it(mc) to remember the count of pre-charges and other information. - At can_attach(), get anon_rss of the target mm, call __mem_cgroup_try_charge() repeatedly and count up mc.precharge. - At attach(), parse the page table, find a target page to be move, and call mem_cgroup_move_account() about the page. - Cancel all precharges if mc.precharge > 0 on failure or at the end of task move. [akpm@linux-foundation.org: a little simplification] Signed-off-by:
-
Daisuke Nishimura authored
In current memcg, charges associated with a task aren't moved to the new cgroup at task migration. Some users feel this behavior to be strange. These patches are for this feature, that is, for charging to the new cgroup and, of course, uncharging from the old cgroup at task migration. This patch adds "memory.move_charge_at_immigrate" file, which is a flag file to determine whether charges should be moved to the new cgroup at task migration or not and what type of charges should be moved. This patch also adds read and write handlers of the file. This patch also adds no-op handlers for this feature. These handlers will be implemented in later patches. And you cannot write any values other than 0 to move_charge_at_immigrate yet. Signed-off-by:
-
Li Zefan authored
Don't call get_pid_ns() before we locate/alloc the ns. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Serge Hallyn <serue@us.ibm.com> Acked-by:
Paul Menage <menage@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Ben Blum authored
Modify the Block I/O cgroup subsystem to be able to be built as a module. As the CFQ disk scheduler optionally depends on blk-cgroup, config options in block/Kconfig, block/Kconfig.iosched, and block/blk-cgroup.h are enhanced to support the new module dependency. Signed-off-by:
Ben Blum <bblum@andrew.cmu.edu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Kirill A. Shutemov authored
Add a forgotten item into CONTENTS. Signed-off-by:
-
Ben Blum authored
Provides support for unloading modular subsystems. This patch adds a new function cgroup_unload_subsys which is to be used for removing a loaded subsystem during module deletion. Reference counting of the subsystems' modules is moved from once (at load time) to once per attached hierarchy (in parse_cgroupfs_options and rebind_subsystems) (i.e., 0 or 1). Signed-off-by:
-
Ben Blum authored
Add interface between cgroups subsystem management and module loading This patch implements rudimentary module-loading support for cgroups - namely, a cgroup_load_subsys (similar to cgroup_init_subsys) for use as a module initcall, and a struct module pointer in struct cgroup_subsys. Several functions that might be wanted by modules have had EXPORT_SYMBOL added to them, but it's unclear exactly which functions want it and which won't. Signed-off-by:
-
Ben Blum authored
This patch series provides the ability for cgroup subsystems to be compiled as modules both within and outside the kernel tree. This is mainly useful for classifiers and subsystems that hook into components that are already modules. cls_cgroup and blkio-cgroup serve as the example use cases for this feature. It provides an interface cgroup_load_subsys() and cgroup_unload_subsys() which modular subsystems can use to register and depart during runtime. The net_cls classifier subsystem serves as the example for a subsystem which can be converted into a module using these changes. Patch #1 sets up the subsys[] array so its contents can be dynamic as modules appear and (eventually) disappear. Iterations over the array are modified to handle when subsystems are absent, and the dynamic section of the array is protected by cgroup_mutex. Patch #2 implements an interface for modules to load subsystems, called cgroup_load_subsys, similar to cgroup_init_subsys, and adds a module pointer in struct cgroup_subsys. Patch #3 adds a mechanism for unloading modular subsystems, which includes a more advanced rework of the rudimentary reference counting introduced in patch 2. Patch #4 modifies the net_cls subsystem, which already had some module declarations, to be configurable as a module, which also serves as a simple proof-of-concept. Part of implementing patches 2 and 4 involved updating css pointers in each css_set when the module appears or leaves. In doing this, it was discovered that css_sets always remain linked to the dummy cgroup, regardless of whether or not any subsystems are actually bound to it (i.e., not mounted on an actual hierarchy). The subsystem loading and unloading code therefore should keep in mind the special cases where the added subsystem is the only one in the dummy cgroup (and therefore all css_sets need to be linked back into it) and where the removed subsys was the only one in the dummy cgroup (and therefore all css_sets should be unlinked from it) - however, as all css_sets always stay attached to the dummy cgroup anyway, these cases are ignored. Any fix that addresses this issue should also make sure these cases are addressed in the subsystem loading and unloading code. This patch: Make subsys[] able to be dynamically populated to support modular subsystems This patch reworks the way the subsys[] array is used so that subsystems can register themselves after boot time, and enables the internals of cgroups to be able to handle when subsystems are not present or may appear/disappear. Signed-off-by:
-
Daisuke Nishimura authored
Current css_get() and css_put() increment/decrement css->refcnt one by one. This patch add a new function __css_get(), which takes "count" as a arg and increment the css->refcnt by "count". And this patch also add a new arg("count") to __css_put() and change the function to decrement the css->refcnt by "count". These coalesce version of __css_get()/__css_put() will be used to improve performance of memcg's moving charge feature later, where instead of calling css_get()/css_put() repeatedly, these new functions will be used. No change is needed for current users of css_get()/css_put(). Signed-off-by: -
Daisuke Nishimura authored
Add cancel_attach() operation to struct cgroup_subsys. cancel_attach() can be used when can_attach() operation prepares something for the subsys, but we should rollback what can_attach() operation has prepared if attach task fails after we've succeeded in can_attach(). Signed-off-by:
-
Dave Young authored
Gmail web gui does not work for sending patches now even with firefox "view source with" extension. It will use windows style line breaks to wrap lines automatically when sening email. Rewrite the gmail web gui part of email client documentation. Signed-off-by:
Dave Young <hidave.darkstar@gmail.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Martin Bligh <mbligh@mbligh.org> Signed-off-by:
-
Randy Dunlap authored
scripts/kernel-doc mishandles a function that has a multi-line function short description and no function parameters. The observed problem was from drivers/scsi/scsi_netlink.c: /** * scsi_netlink_init - Called by SCSI subsystem to intialize * the SCSI transport netlink interface * **/ kernel-doc treated the " * " line as a Description: section with only a newline character in the Description contents. This caused output_highlight() to complain: "output_highlight got called with no args?", plus produce a perl call stack backtrace. The fix is just to ignore Description sections if they only contain "\n". Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
x86/Voyager support has been removed a year ago. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Inspired-by:
Jonathan Corbet <corbet@lwn.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Randy Dunlap authored
Add header file requirements. Compliments of Stephen Rothwell. Stephen calls this Rule #1, so I put it there, but I didn't want to demote any of the others in the list, so I made one of them number 2b. Signed-off-by:
-
Randy Dunlap authored
Documentation/vm/: Expose example and tool source files in the Documentation/ directory in their own files instead of being buried (almost hidden) in readme/txt files. This should help to prevent bitrot. This will make them more visible/usable to users who may need to use them, to developers who may need to test with them, and to anyone who would fix/update them if they were more visible. Also, if any of these possibly should not be in the kernel tree at all, it will be clearer that they are here and we can discuss if they should be removed. Also build the recently-added map_hugetlb.c. Make several functions static to prevent linker warnings. Signed-off-by:
Eric B Munson <ebmunson@us.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Make dnotify_test.c source file and add it to Makefile so that bitrot can be prevented. Signed-off-by:
-
Randy Dunlap authored
Documentation/laptops/laptop-mode.txt: Expose example and tool source files in the Documentation/ directory in their own files instead of being buried (almost hidden) in readme/txt files. This should help to prevent bitrot. This will make them more visible/usable to users who may need to use them, to developers who may need to test with them, and to anyone who would fix/update them if they were more visible. Also, if any of these possibly should not be in the kernel tree at all, it will be clearer that they are here and we can discuss if they should be removed. Signed-off-by:
-
Randy Dunlap authored
Documentation/timers/hpet.txt: Expose example and tool source files in the Documentation/timers/ directory in their own files instead of being buried (almost hidden) in readme/txt files. This should help to prevent bitrot. This will make them more visible/usable to users who may need to use them, to developers who may need to test with them, and to anyone who would fix/update them if they were more visible. Also, if any of these possibly should not be in the kernel tree at all, it will be clearer that they are here and we can discuss if they should be removed. Signed-off-by:
-
Evgeniy Dushistov authored
Alex Viskovatoff let me know that after copying data to solaris's ufs from linux, solaris's fsck sees some errors in cylinder summary information. This is because of solaris expects find some data on another places, then curernt implementation save it. This patch fixes this issue. It is tested by me, and also Alex reported that it works for him. Signed-off-by:
Evgeniy Dushistov <dushistov@mail.ru> Reported-by:
Alex Viskovatoff <viskovatoff@imap.cc> Signed-off-by:
-
Alex Viskovatoff authored
Recent releases of Solaris set the fs_clean state of an unmounted UFS file system as FSLOG ("logging fs"). However, the Linux kernel currently does not recognize the value which represents this state. Thus, attempting to mount such a file system rw produces the message kernel: ufs_read_super: can't grok fs_clean 0xfffffffd and the file system is mounted read-only. This patch makes the kernel recognize that value. Signed-off-by: -
Andrew Morton authored
- fix switch statement layout - fix whitespace stuff - fix comment layout - remove unneeded inlining - use __weak - remove trailing whitespace - move uncached_access() inside `#ifndef __HAVE_PHYS_MEM_ACCESS_PROT' - it is otherwise unused. Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Wu Fengguang authored
So as to return a uniform error -EOVERFLOW instead of a random one: # kmem-seek 0xfffffffffffffff0 seek /dev/kmem: Device or resource busy # kmem-seek 0xfffffffffffffff1 seek /dev/kmem: Block device required Suggested by OGAWA Hirofumi. Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/video/bfin-lq035q1-fb.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Ben Hutchings authored
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Christoph Egger authored
There was some conditionalizing for the LWMON5 boards in kernel source. However infrastructure for enabling this isn't here so probably the special case code can go as well. Signed-off-by:
Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Acked-by:
Alexander Shishkin <virtuoso@slind.org> Signed-off-by:
-
Joe Perches authored
String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Wang Qiang authored
An LCD controller driver for nuc900s. The Linux LOGO is just fine and the FB-Test application was ok, too. Signed-off-by:
Wang Qiang <rurality.linux@gmail.com> Cc: Wang Zongshun <mcuos.com@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Christoph Egger authored
The config Option FB_SOFT_BUFFER was removed in c465e05a ("fbcon/fbdev: Move softcursor out of fbdev to fbcon"). While moving to fbcon this single driver has it left as a select in KConfig / #ifdef in source. This last occurence is removed here so the option is really gone Signed-off-by:
-
Maik Broemme authored
It seems that Sylvain no longer maintain the intelfb driver. Two weeks ago I had a short mail conversation with Jean regarding who can replace him. Well I will do it, because I know the driver and use it very often. Attached is a patch which update the maintainer file to make bug reporting easier. Signed-off-by:
Maik Broemme <mbroemme@plusserver.de> Sylvain Meyer <sylvain.meyer@worldonline.fr> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Dave Airlie <airlied@linux.ie> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
