- 07 Jan, 2009 40 commits
-
-
Kay Sievers authored
Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vitaly Bordug authored
A published errata for ppc440epx states, that when running Linux with both EHCI and OHCI modules loaded, the EHCI module experiences a fatal error when a high-speed device is connected to the USB2.0, and functions normally if OHCI module is not loaded. There used to be recommendation to use only hi-speed or full-speed devices with specific conditions, when respective module was unloaded. Later, it was observed that ohci suspend is enough to keep things going, and it was turned into workaround, as explained below. Quote from original descriprion: The 440EPx USB 2.0 Host controller is an EHCI compliant controller. In USB 2.0 Host controllers, each EHCI controller has one or more companion controllers, which may be OHCI or UHCI. An USB 2.0 Host controller will contain one or more ports. For each port, only one of the controllers is connected at any one time. In the 440EPx, there is only one OHCI companion controller, and only one USB 2.0 Host port. All ports on an USB 2.0 controller default to the companion controller. If you load only an ohci driver, it will have control of the ports and any deviceplugged in will operate, although high speed devices will be forced to operate at full speed. When an ehci driver is loaded, it explicitly takes control of the ports. If there is a device connected, and / or every time there is a new device connected, the ehci driver determines if the device is high speed or not. If it is high speed, the driver retains control of the port. If it is not, the driver explicitly gives the companion controller control of the port. The is a software workaround that uses Initial version of the software workaround was posted to linux-usb-devel: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html and later available from amcc.com: http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2 The patch below is generally based on the latter, but reworked to powerpc/of_device USB drivers, and uses a few devicetree inquiries to get rid of (some) hardcoded defines. Signed-off-by:
Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by:
Stefan Roese <sr@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anton Vorontsov authored
The QE UDC doesn't check for cpm_muram_alloc() return values, this might cause all sorts of misbehaviour when cpm_muram_alloc() failed to allocate the muram memory. While at at, change few dev_dbg() calls to dev_err(), so that the driver would not die silently. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by:
-
Alan Stern authored
This patch (as1161) changes the interface to usb_lock_device_for_reset(). The existing interface is apparently not very clear, judging from the fact that several of its callers don't use it correctly. The new interface always returns 0 for success and it always requires the caller to unlock the device afterward. The new routine will not return immediately if it is called while the driver's probe method is running. Instead it will wait until the probe is over and the device has been unlocked. This shouldn't cause any problems; I don't know of any cases where drivers call usb_lock_device_for_reset() during probe. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Ilpo Järvinen authored
It seems that there's rather involved way to say something which is commonly written in a plain simple form. Some type changes would probably be necessary to get gcc to do bitops instead of divide but it's no worse after my change than before I think. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Oliver Neukum authored
this introduces a sanity check into berry_charge to give up before damage is done if we lack juice. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Phil Endecott authored
Just over a year ago (!) I had this brief exchange with Alan Stern: >> It seems that the signal that can be used with USBDEVFS_DISCSIGNAL and >> in usbdevfs_urb.signr is limited to the real-time signals SIGRTMIN to >> SIGRTMAX. What's the rationale for this restriction? I believe that a >> process can kill() itself with any signal number, can't it? I was >> planning to use SIGIO for usbdevfs_urb.signr and SIGTERM (uncaught) for >> USBDEVFS_DISCSIGNAL. I don't think I'll have a problem with using >> SIGRTMIN+n instead, but I'm curious to know if there's some subtle >> problem with the non-real-time signals that I should be aware of. > > I don't know of any reason for this restriction. Since no-one else could think of a reason either, I offer the following patch which allows any signal to be used with USBDEVFS_DISCSIGNAL and usbdevfs_urb.signr. Signed-off-by:
Phil Endecott <usbpatch@chezphil.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Harvey Harrison authored
Also a trivial annotation in rh.c for: drivers/usb/wusbcore/rh.c:366:9: warning: incorrect type in assignment (different base types) drivers/usb/wusbcore/rh.c:366:9: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/usb/wusbcore/rh.c:366:9: got restricted __le16 [usertype] <noident> drivers/usb/wusbcore/rh.c:367:9: warning: incorrect type in assignment (different base types) drivers/usb/wusbcore/rh.c:367:9: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/usb/wusbcore/rh.c:367:9: got restricted __le16 [usertype] <noident> Association types annotation fixes piles of warnings similar to: drivers/usb/wusbcore/cbaf.c:238:30: warning: incorrect type in initializer (different base types) drivers/usb/wusbcore/cbaf.c:238:30: expected restricted __le16 [usertype] id drivers/usb/wusbcore/cbaf.c:238:30: got int drivers/usb/wusbcore/cbaf.c:238:30: warning: incorrect type in initializer (different base types) drivers/usb/wusbcore/cbaf.c:238:30: expected restricted __le16 [usertype] len drivers/usb/wusbcore/cbaf.c:238:30: got int Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by:
-
Steven Noonan authored
Instead of waiting a painful 5000ms, quirk_usb_disable_ehci() now does a 1000ms loop to wait for the BIOS to acknowledge the handoff. The five second delay is really quite irritating to have to deal with every boot up, and I very seriously doubt any non-broken bios takes more than a second to do the actual handoff. Signed-off-by:
Steven Noonan <steven@uplinklabs.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Stern authored
This patch (as1156) straightens out some code in usbcore. The usb_create_intf_ep_files() and usb_remove_intf_ep_files() routines don't need to be separate inlines; they should be moved bodily into the places where they get used. Signed-off-by:
-
Harvey Harrison authored
There's no need to take the address of the function params or local variables when the direct value byteswapping routines are available. Signed-off-by:
-
Anton Vorontsov authored
This will let us use this header in other header files. Will be needed for the FHCI USB Host driver. Signed-off-by:
-
Rodolfo Giometti authored
This driver implements the support for Oxford OXU210HP USB high-speed host, no peripheral nor OTG. Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Cc: Kan Liu <kan.k.liu@gmail.com> Signed-off-by:
-
Vikram Pandita authored
For function ehci_bus_resume() - Added flag resume_needed No need to wait for 20ms if no port was suspended - Change mdelay to msleep - release and reacquire the spinlock around mdelay Signed-off-by:
vikram pandita <vikram.pandita@ti.com> Acked-by:
-
Arjan van de Ven authored
Use the newly introduced pci_ioremap_bar() function in drivers/usb. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
roel kluin authored
temp, bytes and param->{length,sglen,vary} are unsigned so these tests do nothing. Signed-off-by:Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Sergey Ovcharenko authored
Jason Johnston reported these problems with his external USB hard drive: http://bugs.gentoo.org/show_bug.cgi?id=250789 The number of reported sectors is off-by-one. /proc/bus/usb/devices: T: Bus=01 Lev=02 Prnt=08 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0dc4 ProdID=0073 Rev= 0.00 S: Manufacturer=Macpower Technology Co.LTD. S: Product=USB 2.0 3.5" DEVICE S: SerialNumber=03006C C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Sergey Ovcharenko <velegrin@mail.mipt.ru> Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Paulo Afonso Graner Fessel authored
This patch corrects the issue when one connects a Nokia 5200 cell phone in data storage mode. If one uses an unpatched unusual_devs.h, the following messages appear on /var/log/messages: Dec 12 01:03:24 alberich kernel: usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 12 01:03:25 alberich kernel: usb 4-2: configuration #1 chosen from 1 choice Dec 12 01:03:25 alberich kernel: scsi10 : SCSI emulation for USB Mass Storage devices Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device found, idVendor=0421, idProduct=04bd Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 12 01:03:25 alberich kernel: usb 4-2: Product: Nokia 5200 Dec 12 01:03:25 alberich kernel: usb 4-2: Manufacturer: Nokia Dec 12 01:03:25 alberich kernel: usb 4-2: SerialNumber: 353930018354523 Dec 12 01:03:25 alberich kernel: usbcore: registered new interface driver ub Dec 12 01:03:30 alberich kernel: scsi 10:0:0:0: Direct-Access Nokia Nokia 5200 0000 PQ: 0 AN SI: 4 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sdg: sdg1 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Attached SCSI removable disk Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: Attached scsi generic sg9 type 0 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] (...) The MicroSD card in the phone remains inaccessible and finally the cell phone turns itself off. The patch solves this problem and makes the cell phone fully accessible: [root@alberich kernel-linus-2.6.27.5-1mdv]# df -h Sist. Arq. Tam Usad Disp Uso% Montado em /dev/sda6 31G 5,2G 26G 17% / /dev/sda1 92M 27M 61M 31% /boot /dev/mapper/homevg-homelv 240G 237G 3,5G 99% /home /dev/sda3 21G 7,9G 13G 40% /mnt/windows /dev/sdg1 2,0G 287M 1,7G 15% /media/disk <-------- I've found necessary to use the FL_US_CAPACITY_FIX switch, as without it the cell phone is recognized but it went berserk when performing low-level functions on it (a fdisk -l /dev/uba for example). lsusb -v output follows: Bus 004 Device 004: ID 0421:04bd Nokia Mobile Phones Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0421 Nokia Mobile Phones idProduct 0x04bd bcdDevice 6.03 iManufacturer 1 Nokia iProduct 2 Nokia 5200 iSerial 3 353930018354523 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered Signed-off-by:Paulo Afonso Graner Fessel <pfessel@gmail.com> Signed-off-by:
-
Oliver Neukum authored
This device has been released in a new revision which is still buggy. Signed-off-by:
-
Nguyen Anh Quynh authored
I have another Argosy USB storage device, which has the same problem with the Argosy USB storage device already fixed in 2.6.27.7. But this device has another product ID (840:84), so this patch adds a new entry into unusual_devs to fix the mount problem. I enclose here two patches: one against 2.6.27.8, and another against the latest linus-git tree. The information about the Argosy device is like below: #lsusb -v -d 840:84 Bus 005 Device 005: ID 0840:0084 Argosy Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0840 Argosy Research, Inc. idProduct 0x0084 bcdDevice 0.01 iManufacturer 1 Generic iProduct 2 USB 2.0 Storage Device iSerial 3 8400000000002549 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Before the patch, dmesg returns a lot of information like below (my dmesg is overflown): .... [ 138.833390] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.877631] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.877643] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.921906] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.921923] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information .... After the fix, dmesg returns below information: .... usb 5-1: new high speed USB device using ehci_hcd and address 5 usb 5-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 7:0:0:0: Direct-Access HTS54808 0M9AT00 MG4O PQ: 0 ANSI: 0 sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 7:0:0:0: [sdb] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg1 type 0 kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Cc: Kuniyasu Suzaki <k.suzaki@aist.go.jp> Signed-off-by:Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by:
-
Daniel Drake authored
Jaak Ristioja reported problems with his Pentax K10D camera: https://bugs.gentoo.org/show_bug.cgi?id=250406 /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0a17 ProdID=006e Rev= 1.00 S: Manufacturer=PENTAX Corporation S: Product=K10D C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=100ms The number of reported sectors is off-by-one. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Cc: Kadianakis George <desnacked@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Linus Torvalds authored
The __SWAB_64_THRU_32__ case of a 64-bit byte swap was depending on the no-longer-existant ___swab32() method (three underscores). We got rid of some of the worst indirection and complexity, and now it should just use the 32-bit swab function that was defined right above it. Reported-and-tested-by:
Nicolas Pitre <nico@cam.org> Reported-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
This implementation caused problems in userspace which can, and does define _both_ __LITTLE_ENDIAN and __BIG_ENDIAN. Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
