* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  pnpacpi: print resource shortage message only once
  PM: ACPI and APM must not be enabled at the same time
  ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
  ACPICA: fix acpi_serialize hang regression
  ACPI : Not register gsi for PCI IDE controller in legacy mode
  ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case
  ACPI: Make sysfs interface in ACPI power optional.
  ACPI: EC: Enable boot EC before bus_scan
  increase PNP_MAX_PORT to 40 from 24

When RPCSEC/GSS and krb5i is used, requests are padded, typically to a multiple
of 8 bytes.  This can make the request look slightly longer than it
really is.

As of

	f34b9568 "The NFSv2/NFSv3 server does not handle zero
		length WRITE request correctly",

the xdr decode routines for NFSv2 and NFSv3 reject requests that aren't
the right length, so krb5i (for example) WRITE requests can get lost.

This patch relaxes the appropriate test and enhances the related comment.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

task_ppid_nr_ns is called in three places.  One of these should never
have called it.  In the other two, using it broke the existing
semantics.  This was presumably accidental.  If the function had not
been there, it would have been much more obvious to the eye that those
patches were changing the behavior.  We don't need this function.

In task_state, the pid of the ptracer is not the ppid of the ptracer.

In do_task_stat, ppid is the tgid of the real_parent, not its pid.
I also moved the call outside of lock_task_sighand, since it doesn't
need it.

In sys_getppid, ppid is the tgid of the real_parent, not its pid.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnpacpi: exceeded the max number of IO resources: 40

While this message is a real error and should thus
remain KERN_ERR (even a new dmesg line is seen as a regression
by some, since it was not printed in 2.6.23...) it is certainly
impolite to print this warning 50 times should you happen to
have the oddball system with 90 io resources under a device...

So print the warning just once.

In 2.6.25 we'll get rid of the limits altogether
and these warnings will vanish with them.

http://bugzilla.kernel.org/show_bug.cgi?id=9535Signed-off-by: Len Brown <len.brown@intel.com>

Way back when (in commit 834f2a4a, aka
"VFS: Allow the filesystem to return a full file pointer on open intent"
to be exact), Trond changed the open logic to keep track of the original
flags to a file open, in order to pass down the the intent of a dentry
lookup to the low-level filesystem.

However, when doing that reorganization, it changed the meaning of
namei_flags, and thus inadvertently changed the test of access mode for
directories (and RO filesystem) to use the wrong flag.  So fix those
test back to use access mode ("acc_mode") rather than the open flag
("flag").

Issue noticed by Bill Roman at Datalight.
Reported-and-tested-by: Bill Roman <bill.roman@datalight.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (7001): av7110: fix section mismatch
  V4L/DVB (6999): ivtv: stick to udelay=10 after all

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] fix unaligned access in readdir

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24:
  sh: Force __access_ok() to obey address space limit.
  sh: Fix argument page dcache flushing regression.

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Replace 40c7869b kludge
  [MIPS] Lasat: Fix built in separate object directory.
  [MIPS] Malta: Fix software reset on big endian
  [MIPS] pnx8xxx: move to clocksource
  [MIPS] Wrong CONFIG option prevents setup of DMA zone.

Since the introduction of the acquire_console_sem calls in
0333d835, kexecing can cause the
kernel to deadlock:

 ps3fb_shutdown()
  -> unregister_framebuffer()
  -> fb_notifier_call_chain(FB_EVENT_FB_UNBIND)
  -> fbcon_fb_unbind()
  -> unbind_con_driver()
  -> bind_con_driver()
	[ acquires console_sem ]
  -> fbcon_deinit()
  -> fbops->fb_release(newinfo, 0)
  -> ps3fb_release()
  -> ps3fb_sync()
	[ acquires console_sem ]

This change avoids the deadlock by moving the acquire_console_sem()
out of ps3fb_sync(), and puts it into the two other callsites, leaving
ps3fb_release() to call ps3fb_sync() without the console semaphore.

[Geert]
  - Corrected call sequence above
  - ps3fb_release() may be called with and without console_sem held. This is an
    inconsistency that should be fixed at the fb level, but for now, try to
    acquire console_sem in ps3fb_release().

    I think it's safer to let ps3fb_release() try to acquire console_sem and
    not refresh the screen if it fails, than to call ps3fb_sync() without
    holding console_sem, as ps3fb_par may be modified at the same time, causing
    crashes or lockups.

    Besides, ps3fb_release() only calls ps3fb_sync() to refresh the screen
    when display flipping is disabled, which is an uncommon case (except during
    shutdown/kexec).
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in
dev->core.driver_data) to be free()ed, which we potentially access
from the ps3fbd kthread.

This change frees the framebuffer after stopping the ps3fbd kthread.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  blktrace: kill the unneeded initcall
  block: fix blktrace timestamps
  loop: fix bad bio_alloc() nr_iovec request
  Don't blatt first element of prv in sg_chain()

The bug causes corruptions of data read from flash.

The original code performs cache invalidation from "adr" to "adr + len"
in do_write_buffer().  Since len and adr could be updated in the code
before invalidation - it causes improper setting of cache invalidation
regions.
Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woohouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix oops reported by Trond.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ACPI and APM used "pm_active" to guarantee that
they would not be simultaneously active.

But pm_active was recently moved under CONFIG_PM_LEGACY,
so that without CONFIG_PM_LEGACY, pm_active became a NOP --
allowing ACPI and APM to both be simultaneously enabled.
This caused unpredictable results, including boot hangs.

Further, the code under CONFIG_PM_LEGACY is scheduled
for removal.

So replace pm_active with pm_flags.
pm_flags depends only on CONFIG_PM,
which is present for both CONFIG_APM and CONFIG_ACPI.

http://bugzilla.kernel.org/show_bug.cgi?id=9194Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>

[Ralf: The LDSCRIPT script needed fixing, too]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

I noticed that the commit f1974653
(MIPS Tech: Get rid of volatile in core code) broke the software
reset functionality for MIPS Malta boards in big-endian mode.

According to the MIPS Malta board user's manual, writing the magic
32-bit GORESET value into the SOFTRES register initiates board soft
reset. My experimentation has shown that the endianness of the GORESET
integer should thereby be the same as the endianness, which has been
set for the CPU itself. The writew() function used to write the magic
value in the code introduced by the commit mentioned above, however,
swaps bytes for big-endian kernels and transfers 16 bits instead of 32.

The patch below replaces the writew() function by the __raw_writel()
routine, which leaves the byte order intact and transfers the whole
MIPS machine word. Trivial code cleanup (replacing spaces by a tab
and cutting oversized lines to make checkpatch.pl happy) is also
included.

The patch was tested using a Malta evaluation board running in both
BE and LE modes. For both modes, software reset was fully functional
after the change.

P.S. I suspect that the same commit broke the "standby" functionality
for MIPS Atlas boards. However, I did not touch the Atlas code as I
don't have such board at my disposal and also because the linux-mips.org
Web site claims that Atlas support is scheduled for removal.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch converts PNX8XXX system timer to clocksource restoring PNX8550
support back to live.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix driver data name to match whitelist of acceptable names that contain
pointers init data so that section mismatch warning is placated.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Using an udelay of 5 seems to result in problems for several people.
For now abandon the udelay value of 5 and stick to 10, even though this
will mean a longer load time of the cx2584x firmware.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

It just inits the mutex, we can do that with DEFINE_MUTEX() instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

David Dillow reported broken blktrace timestamps. The reason
is cpu_clock() which is not a global time source.

Fix bkltrace timestamps by using ktime_get() like the networking
code does for packet timestamps. This also removes a whole lot
of complexity from bkltrace.c and shrinks the code by 500 bytes:

   text    data     bss     dec     hex filename
   2888     124      44    3056     bf0 blktrace.o.before
   2390     116      44    2550     9f6 blktrace.o.after
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Don't allocate room for an iovec when it is not needed.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

I realize that sg chaining is a ploy to make the rest of the kernel
devs feel the pain of the SCSI subsystem.  But this was a little
unsubtle.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

This patch should fix the issue seen on Alpha with unaligned accesses in
the new readdir code. By aligning each dirent to sizeof(u64) we'll avoid
unaligned accesses. To make doubly sure we're not hitting problems also
rearrange struct hack_dirent to avoid holes.

SGI-PV: 975411
SGI-Modid: xfs-linux-melb:xfs-kern:30302a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

It is important that these resources be reserved
to avoid conflicts with well known ACPI registers.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

When the thread_info->addr_limit changes were introduced, __access_ok()
was missed in the conversion, allowing user processes to perform P1/P2
accesses under certain conditions.

This has already been corrected with the nommu refactoring in later
kernels.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

http://bugzilla.kernel.org/show_bug.cgi?id=8171Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

When PCI IDE controller works in legacy mode and no PRT entry is found
in ACPI PRT table, OSPM will neither read the irq number from the IDE
PCI configuration space nor call the function of acpi_register_gsi to
register gsi.

http://bugzilla.kernel.org/show_bug.cgi?id=5637Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>