Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Changes:

1. The baud for spi mmc defined in board file is not used by the old
spi driver. A slower value from spi framework is used instead. In latest
bug fixing, the correct baud is use which is too high for spi MMC card.

2. SPI is enabled only after DMA is started.

3. MMC detection IRQ is set to 55.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Fix/change formatting of a few more things.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

This is fixes a problem where we could jump to the wrong address. By
doing a "p0 = reti; jump (p0)". If a different, higher level interrupt
came in, just before, rather than returning to the calling function, we
would return to a random place in the kernel.

This very elegant fix from Bernd grabs the return location off the
stack, and places it into P0, so when we do a return, it goes to the
correct place.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

 - move the CONFIG_KGDB into one block, for easier reading
 - remove printk from printk_address, and pass around buffers. Also
   print out the labels when decoding CPLB errors, so you know exactly
   where the error was.
 - Do not use fixed addresses, becuase people do not know where they come from.
 - Turn the printing level down on the dump, so if you don't want,
   only the signal prints out - just like on other archs. If a kernel/interrupt
   crashes, it should dump everything all the time
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

This fixes two things:
 - stop calling write_lock_irq/write_unlock_irq which can turn modify
   irq levels
 - don't calling mmput when handing exceptions - since this might_sleep,
   which does a rti, and leaves us in kernel space (irq15, rather
   than irq5).
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Javier Herrero <jherrero@hvsistemas.es>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (26 commits)
  cpuidle: remove unused exports
  acpi: remove double mention of Support for ACPI option
  ACPI: use select POWER_SUPPLY for AC, BATTERY and SBS
  ACPI: Battery: Allow extract string from integer
  ACPI: battery: Support for non-spec name for LiIon technology
  ACPI: battery: register power_supply subdevice only when battery is present
  suspend: MAINTAINERS update
  ACPI: update MAINTAINERS
  fujitsu-laptop.c: remove dead code
  cpuidle: unexport tick_nohz_get_sleep_length
  ACPI: battery: Update battery information upon sysfs read.
  fujitsu-laptop: make 2 functions static
  ACPI: EC: fix use-after-free
  ACPI: battery: remove dead code
  ACPI: Fan: Drop force_power_state acpi_device option
  ACPI: Fan: fan device does not need own structure
  ACPI: power: don't cache power resource state
  ACPI: EC: Output changes to operational mode
  ACPI: EC: Add workaround for "optimized" controllers
  ACPI: EC: Don't re-enable GPE for each transaction.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86 boot: document for 32 bit boot protocol
  remove the dead X86_REMOTE_DEBUG option
  x86: merge EARLY_PRINTK options
  x86: mm/discontig_32.c: make code static
  x86: kernel/setup_32.c: unexport machine_id
  x86 gart: rename symbols only used for the GART implementation
  x86 gart: make some variables and functions static
  x86 gart: rename CONFIG_IOMMU to CONFIG_GART_IOMMU
  x86 gart: rename iommu.h to gart.h
  x86: additional CPUID strings; fix strings for AMD-ecx

Extend Peter's patch to fix accounting issues, by keeping stime
monotonic too.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Frans Pop <elendil@planet.nl>

This patch documents the 32-bit boot protocol of x86. It has been used
by Kexec and LinuxBIOS. This patch is based on the proposal of Peter
Anvin.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch removes the dead X86_REMOTE_DEBUG option.
Signed-off-by: Adrian Bunk <bunk@kernel.org>

This patch merges the x86_64 EARLY_PRINTK option into the i386 one.
Signed-off-by: Adrian Bunk <bunk@kernel.org>

node0_bdata and paddr_to_nid() can become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch removes the unused EXPORT_SYMBOL(machine_id).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch renames the 4 symbols iommu_hole_init(), iommu_aperture,
iommu_aperture_allowed, iommu_aperture_disabled. All these symbols are only
used for the GART implementation of IOMMUs.

It adds and additional gart_ prefix to them.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch makes some functions and variables static in pci-gart_64.c which are
not used somewhere else.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch renames the IOMMU config option to GART_IOMMU because in fact it
means the GART and not general support for an IOMMU on x86.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This patch renames the include file asm-x86/iommu.h to asm-x86/gart.h to make
clear to which IOMMU implementation it belongs. The patch also adds "GART" to
the Kconfig line.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Additional CPUID strings (sse4_1, sse4_2, sse5, skinit, wdt); fix the
positioning of the AMD ecx strings (cr8_legacy was duplicated under
two different names, so the alignment of all the other strings were
off by one.)
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch removes the following unused exports:
- cpuidle_devices
- cpuidle_register_governor
- cpuidle_unregister_governor
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>

Current description for CONFIG_ACPI includes the word "Support" twice.  One
effect of this is that in menuconfig the "--->" that indicates the presence
of sub-options will not show up unless you have a very wide console.
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

POWER_SUPPLY is needed for AC, battery, and SBS sysfs support.  Use
'select' instead of 'depends on', as it is will not be selected by anything
else, leading to confusion.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (34 commits)
  [MIPS] tb0219: Update copyright message.
  [MIPS] MT: Fix bug in multithreaded kernels.
  [MIPS] Alchemy: Remove CONFIG_TS_AU1X00_ADS7846 from defconfigs.
  Author: Ralf Baechle <ralf@linux-mips.org>
  [MIPS] sb1250: Enable GenBus IDE in defconfig.
  [MIPS] vmlinux.ld.S: correctly indent .data section
  [MIPS] c-r3k: Implement flush_cache_range()
  [MIPS] Store sign-extend register values for PTRACE_GETREGS
  [MIPS] Alchemy: Register platform devices
  [MIPS] Add len and addr validation for MAP_FIXED mappings.
  [MIPS] IRIX: Fix off-by-one error in signal compat code.
  [MIPS] time: Replace plat_timer_setup with modern APIs.
  [MIPS] time: Fix cut'n'paste bug in Sibyte clockevent driver.
  [MIPS] time: Make c0_compare_int_usable faster
  [MIPS] time: Fix cevt-r4k.c for 64-bit kernel
  [MIPS] Sibyte: Delete {sb1250,bcm1480}_steal_irq().
  [MIPS] txx9tmr clockevent/clocksource driver
  [MIPS] Add mips_hpt_frequency check to mips_clockevent_init().
  [MIPS] IP32: Fixes after interrupt renumbering.
  [MIPS] IP27: Fix slice logic to work for arbitrary number of slices.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: fix style in kernel/sched.c
  sched: fix style of swap() macro in kernel/sched_fair.c
  sched: report CPU usage in CFS cgroup directories
  sched: move rcu_head to task_group struct
  sched: fix incorrect assumption that cpu 0 exists
  sched: keep utime/stime monotonic
  sched: make kernel/sched.c:account_guest_time() static

This reverts commit 2e1c49db.

First off, testing in Fedora has shown it to cause boot failures,
bisected down by Martin Ebourne, and reported by Dave Jobes.  So the
commit will likely be reverted in the 2.6.23 stable kernels.

Secondly, in the 2.6.24 model, x86-64 has now grown support for
SPARSEMEM_VMEMMAP, which disables the relevant code anyway, so while the
bug is not visible any more, it's become invisible due to the code just
being irrelevant and no longer enabled on the only architecture that
this ever affected.
Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Martin Ebourne <fedora@ebourne.me.uk>
Cc: Zou Nan hai <nanhai.zou@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>