Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This will avoid deadlocks of the form:

stack backtrace:
 [<c0104fda>] show_trace_log_lvl+0x1a/0x30
 [<c0105c02>] show_trace+0x12/0x20
 [<c0105d15>] dump_stack+0x15/0x20
 [<c013ee42>] __lock_acquire+0xc22/0x1030
 [<c013f2b1>] lock_acquire+0x61/0x80
 [<c012edd9>] flush_workqueue+0x49/0x70
 [<c012ee0d>] flush_scheduled_work+0xd/0x10
 [<dcf55c0c>] nfs_release_automount_timer+0x2c/0x30 [nfs]
 [<dcf45d8e>] nfs_free_server+0x9e/0xd0 [nfs]
 [<dcf4e626>] nfs_kill_super+0x16/0x20 [nfs]
 [<c017b38d>] deactivate_super+0x7d/0xa0
 [<c018f94b>] mntput_no_expire+0x4b/0x80
 [<c018fd94>] expire_mount_list+0xe4/0x140
 [<c0191219>] mark_mounts_for_expiry+0x99/0xb0
 [<dcf55d1d>] nfs_expire_automounts+0xd/0x40 [nfs]
 [<c012e61b>] run_workqueue+0x12b/0x1e0
 [<c012f05b>] worker_thread+0x9b/0x100
 [<c0131c72>] kthread+0x42/0x70
 [<c0104c0f>] kernel_thread_helper+0x7/0x18
 =======================
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Doing so may not be safe...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Doing so would require us to introduce bh-safe locks into put_rpccred().
This patch fixes the lockdep complaint reported by Marc Dietrich:

inconsistent {softirq-on-W} -> {in-softirq-W} usage.
swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
 (rpc_credcache_lock){-+..}, at: [<c01dc487>]
_atomic_dec_and_lock+0x17/0x60
{softirq-on-W} state was registered at:
  [<c013e870>] __lock_acquire+0x650/0x1030
  [<c013f2b1>] lock_acquire+0x61/0x80
  [<c02db9ac>] _spin_lock+0x2c/0x40
  [<c01dc487>] _atomic_dec_and_lock+0x17/0x60
  [<dced55fd>] put_rpccred+0x5d/0x100 [sunrpc]
  [<dced56c1>] rpcauth_unbindcred+0x21/0x60 [sunrpc]
  [<dced3fd4>] a0 [sunrpc]
  [<dcecefe0>] rpc_call_sync+0x30/0x40 [sunrpc]
  [<dcedc73b>] rpcb_register+0xdb/0x180 [sunrpc]
  [<dced65b3>] svc_register+0x93/0x160 [sunrpc]
  [<dced6ebe>] __svc_create+0x1ee/0x220 [sunrpc]
  [<dced7053>] svc_create+0x13/0x20 [sunrpc]
  [<dcf6d722>] nfs_callback_up+0x82/0x120 [nfs]
  [<dcf48f36>] nfs_get_client+0x176/0x390 [nfs]
  [<dcf49181>] nfs4_set_client+0x31/0x190 [nfs]
  [<dcf49983>] nfs4_create_server+0x63/0x3b0 [nfs]
  [<dcf52426>] nfs4_get_sb+0x346/0x5b0 [nfs]
  [<c017b444>] vfs_kern_mount+0x94/0x110
  [<c0190a62>] do_mount+0x1f2/0x7d0
  [<c01910a6>] sys_mount+0x66/0xa0
  [<c0104046>] syscall_call+0x7/0xb
  [<ffffffff>] 0xffffffff
irq event stamp: 5277830
hardirqs last  enabled at (5277830): [<c017530a>] kmem_cache_free+0x8a/0xc0
hardirqs last disabled at (5277829): [<c01752d2>] kmem_cache_free+0x52/0xc0
softirqs last  enabled at (5277798): [<c0124173>] __do_softirq+0xa3/0xc0
softirqs last disabled at (5277817): [<c01241d7>] do_softirq+0x47/0x50

other info that might help us debug this:
no locks held by swapper/0.

stack backtrace:
 [<c0104fda>] show_trace_log_lvl+0x1a/0x30
 [<c0105c02>] show_trace+0x12/0x20
 [<c0105d15>] dump_stack+0x15/0x20
 [<c013ccc3>] print_usage_bug+0x153/0x160
 [<c013d8b9>] mark_lock+0x449/0x620
 [<c013e824>] __lock_acquire+0x604/0x1030
 [<c013f2b1>] lock_acquire+0x61/0x80
 [<c02db9ac>] _spin_lock+0x2c/0x40
 [<c01dc487>] _atomic_dec_and_lock+0x17/0x60
 [<dced55fd>] put_rpccred+0x5d/0x100 [sunrpc]
 [<dcf6bf83>] nfs_free_delegation_callback+0x13/0x20 [nfs]
 [<c012f9ea>] __rcu_process_callbacks+0x6a/0x1c0
 [<c012fb52>] rcu_process_callbacks+0x12/0x30
 [<c0124218>] tasklet_action+0x38/0x80
 [<c0124125>] __do_softirq+0x55/0xc0
 [<c01241d7>] do_softirq+0x47/0x50
 [<c0124605>] irq_exit+0x35/0x40
 [<c0112463>] smp_apic_timer_interrupt+0x43/0x80
 [<c0104a77>] apic_timer_interrupt+0x33/0x38
 [<c02690df>] cpuidle_idle_call+0x6f/0x90
 [<c01023c3>] cpu_idle+0x43/0x70
 [<c02d8c27>] rest_init+0x47/0x50
 [<c03bcb6a>] start_kernel+0x22a/0x2b0
 [<00000000>] 0x0
 =======================
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Do not allow cached open for O_RDONLY or O_WRONLY unless the file has been
previously opened in these modes.

Also Fix the calculation of the mode in nfs4_close_prepare. We should only
issue an OPEN_DOWNGRADE if we're sure that we will still be holding the
correct open modes. This may not be the case if we've been doing delegated
opens.

Finally, there is no need to adjust the open mode bit flags in
nfs4_close_done(): that has already been done in nfs4_close_prepare().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We don't really need to clear &state->inode_states inside
nfs4_set_mode_locked, and doing so without holding the inode->i_lock would
in any case be a bug...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We need to grab the inode->i_lock atomically with the last reference put in
order to remove the open context that is being freed from the
nfsi->open_files list.

Fix by converting the kref to a standard atomic counter and then using
atomic_dec_and_lock()...

Thanks to Arnd Bergmann for pointing out the problem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The commit 4ada539e lead to the unpleasant
possibility of an asynchronous rpc_task being required to call
rpciod_down() when it is complete. This again means that the rpciod
workqueue may get to call destroy_workqueue on itself -> hang...

Change rpciod_up/rpciod_down to just get/put the module, and then
create/destroy the workqueues on module load/unload.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] rpc: update defconfig
  [ARM] pata_icside: fix the FIXMEs
  [ARM] 4542/1: AT91: include atmel_lcdc.h in at91sam926{1,3}_devices.c
  [ARM] 4541/1: iop: defconfig updates
  [ARM] 4531/1: remove is_in_rom() protptype

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] api: fix writting into unallocated memory in setkey_aligned

C99 6.10.3[11]: preprocessing directive within the argument list of
macro invocation => undefined behaviour.  Don't do that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Lguest drivers need to default to "Y" otherwise they're never selected
for new builds.  (We don't bother prompting, because they're less than
4k combined, and implied by selecting lguest support).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

More fallout from the writeback fixes: debug register transfer
instructions do their own writeback and thus need to disable the general
writeback mechanism.

This fixes oopses and some guest failures on AMD machines (the Intel
variant decodes the instruction in hardware and thus does not need
emulation).

Cc: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: Add xt_statistic.h to the header list for usermode programs
  [BNX2]: Fix suspend/resume problem.
  [TG3]: Fix suspend/resume problem.

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Fix build.

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (32 commits)
  [SCSI] aacraid: prevent panic on adapter resource failure
  [SCSI] aha152x: use data accessors and !use_sg cleanup
  [SCSI] aha152x: Fix check_condition code-path
  [SCSI] aha152x: Clean Reset path
  [SCSI] aha152x: preliminary fixes and some comments
  [SCSI] aha152x: use bounce buffer
  [SCSI] aha152x: fix debug mode symbol conflict
  [SCSI] sd: disentangle barriers in SCSI
  [SCSI] lpfc : scsi command accessor fix for 8.2.2
  [SCSI] qlogicpti: Some cosmetic changes
  [SCSI] lpfc 8.2.2 : Change version number to 8.2.2
  [SCSI] lpfc 8.2.2 : Style cleanups
  [SCSI] lpfc 8.2.2 : Miscellaneous Bug Fixes
  [SCSI] lpfc 8.2.2 : Miscellaneous management and logging mods
  [SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macro
  [SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical port
  [SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list
  [SCSI] lpfc 8.2.2 : Error messages and debugfs updates
  [SCSI] initialize shost_data to zero
  [SCSI] mptsas: add SMP passthrough support via bsg
  ...

This 965G and above chipsets moved the batch buffer non-secure bits to
another place. This means that previous drm's allowed in-secure batchbuffers
to be submitted to the hardware from non-privileged users who are logged
into X and and have access to direct rendering.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Alan Cox suggested that the solution to the FIXMEs in pata_icside is
to use a private postreset method to detect the lack of devices on a
port, and in such a case, disable the interrupt for the port.

This patch implements such a method, and removes the hard coded
disable of port 0.  Tested as working.
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

setkey_unaligned() commited in ca7c3938
overwrites unallocated memory in the following memset() because
I used the wrong buffer length.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add xt_statistic.h to the list of headers to install.

Apparently needed to build newer versions of iptables.
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct incorrect removal of asm-generic/fcntl.h from asm-sparc/fcntl.h by 
commit 6ba60d21.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Include atmel_lcdc.h in at91sam926{1,3}_devices.c
Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

With the availability of the iop-adma driver iop platforms can now use
their offload engines for md-raid5 (copy+xor) and net-dma (tcp receive
copy) offload.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Remove unused is_in_rom() function prototype.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

If the driver fails to allocate the contiguous (DMAable) memory for
system reasons, we fail to load the instance, but then we try to free
the <nul> allocation in the cleanup code and we get a panic in
pci_free_consistent(). This is reported against an older kernel, hope
this is relevant for latest/greatest.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

And finally this is the regular !use_sg cleanup
and use of data accessors.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

check_condition code-path was similar but more
complicated to Reset. It went like this:

  1. extra space was allocated at aha152x_scdata for mirroring
    scsi_cmnd members.
  2. At aha152x_internal_queue() every not check_condition
    (REQUEST_SENSE) command was copied to above members in
    case of error.
  3. At busfree_run() in the DONE_CS phase if a Status of
    SAM_STAT_CHECK_CONDITION was detected. The command was
    re-queued Internally using aha152x_internal_queue(,,check_condition,)
    The old command members are over written with the
    REQUEST_SENSE info.
  4. At busfree_run() in the DONE_CS phase again. If it is a
    check_condition command, info was restored from mirror
    made at first call to aha152x_internal_queue() (see 2)
    and the command is completed.

What I did is:

  1. Allocate less space in aha152x_scdata only for the 16-byte
    original command. (which is actually not needed by scsi-ml
    anymore at this stage. But this is to much knowledge of scsi-ml)
  2. If Status == SAM_STAT_CHECK_CONDITION, then like before
     re-queue a REQUEST_SENSE command. But only now save original
     command members. (Less of them)
  3. In aha152x_internal_queue(), just like for Reset, use the
    check_condition hint to set differently the working members.
    execute the command.
  4. At busfree_run() in the DONE_CS phase again. restore needed
     members.

While at it. This patch fixes a BUG. Old code when sending
a REQUEST_SENSE for a failed command. Would than return with
cmd->resid == 0 which was the status of the REQUEST_SENSE.
The failing command resid was lost. And when would resid
be interesting if not on a failing command?
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

What Reset code was doing:  Save command's important/dangerous
Info on stack. NULL those members from scsi_cmnd.
Issue a Reset. wait for it to finish than restore members
and return.

What I do is save or NULL nothing. But use the "resetting"
hint in aha152x_internal_queue() to NULL out working members
and leave struct scsi_cmnd alone.

The indent here looks funny but it will change/drop in last
patch and it is clear this way what changed.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

  hunk by hunk:
  - CHECK_CONDITION is what happens to cmnd->status >> 1
    or after status_byte() macro. But here it is used
    directly on status which means 0x1 which is an undefined
    bit in the standard. And is a status that will never
    return from a target.

  - in busfree_run at the DONE_SC phase we have 3 distinct
    operation:
	1-if(DONE_SC->SCp.phase & check_condition)
          The REQUEST_SENSE command return.
          - Restore original command
	  - Than continue to operation 3.
	2-if(DONE_SC->SCp.Status==SAM_STAT_CHECK_CONDITION)
          A regular command returned with a status.
	  - Internally re-Q a REQUEST_SENSE.
	  - Do not do operation 3.
	3-
	  - Complete the command and return it to scsi-ml
     So the 0x2 in both these operations (1,2) means the scsi
     check-condition status, hence SAM_STAT_CHECK_CONDITION

  - Here the code asks about !(DONE_SC->SCp.Status & not_issued)
    but "not_issued" is an enum belonging to the "phase" member
    and not to the Status returned from target. The reason this
    works is because not_issued==1 and Also CHECK_CONDITION==1
    (remember from hunk 1). So actually the code was asking
    !(DONE_SC->SCp.Status & CHECK_CONDITION). Which means
    "Has the status been read from target yet?"
    Staus is read at status_run(). "not_issued" is
    cleared in seldo_run() which is usually earlier than
    status_run().

  So this patch does nothing as far as assembly is concerned
  but it does let the reader understand what is going on.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Cause highmem buffers to be bounced to low memory until this
driver supports highmem addresses.  Otherwise it just oopses
on NULL buffer addresses.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The symbol <debug_locks> conflicts with the rather global one in
include/linux/locks.h.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Our current implementation has a generic set of barrier functions that
go through the SCSI driver model.  Realistically, this is unnecessary,
because the only device that can use barriers (sd) can set the flush
functions up at probe or revalidate time.  This patch pulls the barrier
functions out of the mid layer and scsi driver model and relocates them
directly in sd.
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The device would not resume properly if it was shutdown before the system
was suspended.  In such scenario where the netif_running state is 0,
bnx2_suspend() would not save the PCI state and so the memory enable bit
and bus master enable bit would be lost.

We fix this by always saving and restoring the PCI state in
bnx2_suspend() and bnx2_resume() regardless of netif_running() state.

Update version to 1.6.4.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joachim Deguara <joachim.deguara@amd.com> reported that tg3 devices
would not resume properly if the device was shutdown before the system
was suspended.  In such scenario where the netif_running state is 0,
tg3_suspend() would not save the PCI state and so the memory enable bit
and bus master enable bit would be lost.

We fix this by always saving and restoring the PCI state in
tg3_suspend() and tg3_resume() regardless of netif_running() state.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fixes for the SLB shadow buffer code
  [POWERPC] Fix a compile warning in powermac/feature.c
  [POWERPC] Fix a compile warning in pci_32.c
  [POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
  [POWERPC] Fix num_cpus calculation in smp_call_function_map()
  [POWERPC] ps3: Fix section mismatch in ps3/setup.c
  [POWERPC] spufs: Fix affinity after introduction of node_allowed() calls
  [POWERPC] Fix special PTE code for secondary hash bucket
  [POWERPC] Expand RPN field to 34 bits when using 64k pages

 * wrong argument passed to pci_unmap_single() on failure
   exit paths
 * leak in the same area
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/~dwmw2/mtd-2.6.23:
  [MTD] Makefile fix for mtdsuper

* git://git.infradead.org/battery-2.6:
  Don't compile the PMU power driver on 64-bit PowerPC