This makes "USB Monitor" appear under "Miscellaneous USB options"
section instead of in the middle of device specific drivers in the
"USB Imaging devices" section.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1119) will help to reduce the clutter of usb-storage's
unusual_devs file by automatically detecting some devices that need
the IGNORE_RESIDUE flag.  The idea is that devices should never return
a non-zero residue for an INQUIRY or a READ CAPACITY command unless
they failed to transfer all the requested data.  So if one of these
commands transfers a standard amount of data but there is a positive
residue, we know that the residue is bogus and we can set the flag.

This fixes the problems reported in Bugzilla #11125.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1122) fixes a bug: When an interface is unregistered,
its children (sysfs files and endpoint devices) are unregistered after
it instead of before.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1121) fixes a bug in the USB serial core.  When a device
is unregistered, the core will give back its minors -- even if the
device hasn't been assigned any!

The patch reserves the highest minor value (255) to mean that no minor
was assigned.  It also removes some dead code and does a small style
fixup.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Without it, we might have trouble when trying to write
some composite gadget drivers.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-storage: quirk around v1.11 firmware on Nikon D40

https://bugzilla.redhat.com/show_bug.cgi?id=454028
Just as in earlier firmware versions, we need to perform this
quirk for the latest version too.

Speculatively do the entry for the D80 too, as they seem to
have the same firmware problems historically.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1114) fixes a problem that was revealed by an earlier
patch (as1069b).  Some broken controllers seem never to turn off their
RHCS interrupt status bit, even when told to do so.  As a result they
generate an interrupt storm and hang the system.

The patch avoids enabling RHSC interrupt requests when the RHCS status
bit is already set.  This should have no adverse affects on normal
controllers, since they won't set the status bit until a root-hub
status change actually occurs, in which case we wouldn't enable RHSC
interrupt requests anyway -- we would wait until the status change had
been processed and cleared.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb/core/driver: fix warning:
drivers/usb/core/driver.c:834: warning: 'do_unbind_rebind' defined but not used
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1117) adds a kerneldoc line for the "needs_binding"
field in struct usb_interface.  It was accidentally omitted when the
field was added.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Patch adds support for Luminance Stellaris Evaluation/Development
Kits (FTDI 2232C based).
The PIDs were missing.

Successfully tested with a Stellaris LM3S8962 Evaluation kit.
Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB product id registration for the ELV HS485 USB adapter (www.elv.de) to
their home automation bus system. Applies to 2.6.26.
Signed-off-by: Andre Schenk <andre@melior.s.bawue.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: fix USB boot crash, ecm_do_notify(), list_add corruption. prev->next should be next (ffff88003b8f82f8)

This fixes a BUG() turned up by Ingo via randconfig testing, where
CONFIG_LIST_DEBUG turned up list corruption.  The corruption was
caused by the dummy_hcd (single-machine test harness for gadget and
HCD code) trashing the request queue when driven by the new CDC
composite gadget an I/O pattern that was previously uncommon.
Fix suggested by Alan Stern.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch removes the auerswald USB driver from the linux kernel
2.6.26.

This driver was included into the kernel mainly to connect to the ISDN
framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile
and moving ISDN support, this connection was never realized, and the
only use of this driver was for device configuration. In the age of DSL,
the demand of ISDN support is getting very low.

Meanwhile, with the advent of libusb, an userspace driver was done for
the device configuration which works fine for linux and mac. (Thanks to
the libusb developers!). The userspace driver is downloadable from the
auerswald web site.

So this driver is obsolete now and has to be removed. Many thanks to all
developers which helped me to bring this driver up and working.
Signed-off-by: Wolfgang Muees <wolfgang@iksw-muees.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore()
  crypto: hash - Add missing top-level functions
  crypto: hash - Fix digest size check for digest type
  crypto: tcrypt - Fix AEAD chunk testing
  crypto: talitos - Add handling for SEC 3.x treatment of link table

* git://oss.sgi.com:8090/xfs/linux-2.6: (45 commits)
  [XFS] Fix use after free in xfs_log_done().
  [XFS] Make xfs_bmap_*_count_leaves void.
  [XFS] Use KM_NOFS for debug trace buffers
  [XFS] use KM_MAYFAIL in xfs_mountfs
  [XFS] refactor xfs_mount_free
  [XFS] don't call xfs_freesb from xfs_unmountfs
  [XFS] xfs_unmountfs should return void
  [XFS] cleanup xfs_mountfs
  [XFS] move root inode IRELE into xfs_unmountfs
  [XFS] stop using file_update_time
  [XFS] optimize xfs_ichgtime
  [XFS] update timestamp in xfs_ialloc manually
  [XFS] remove the sema_t from XFS.
  [XFS] replace dquot flush semaphore with a completion
  [XFS] replace inode flush semaphore with a completion
  [XFS] extend completions to provide XFS object flush requirements
  [XFS] replace the XFS buf iodone semaphore with a completion
  [XFS] clean up stale references to semaphores
  [XFS] use get_unaligned_* helpers
  [XFS] Fix compile failure in xfs_buf_trace()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: rename structs
  dlm: add missing kfrees

Done as a script (well, a single "git mv" actually) on request from
Yoshinori Sato as a way to avoid a huge diff.
Requested-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a dlm_ prefix to the struct names in config.c.  This resolves a
conflict with struct node in particular, when include/linux/node.h
happens to be included.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Teigland <teigland@redhat.com>

A couple of unlikely error conditions were missing a kfree on the error
exit path.
Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: David Teigland <teigland@redhat.com>

Wolfgang Walter reported this oops on his via C3 using padlock for
AES-encryption:

##################################################################

BUG: unable to handle kernel NULL pointer dereference at 000001f0
IP: [<c01028c5>] __switch_to+0x30/0x117
*pde = 00000000
Oops: 0002 [#1] PREEMPT
Modules linked in:

Pid: 2071, comm: sleep Not tainted (2.6.26 #11)
EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0
EIP is at __switch_to+0x30/0x117
EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300
ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000)
Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046
       c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000
       c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0
Call Trace:
 [<c03b5b43>] ? schedule+0x285/0x2ff
 [<c0131856>] ? pm_qos_requirement+0x3c/0x53
 [<c0239f54>] ? acpi_processor_idle+0x0/0x434
 [<c01025fe>] ? cpu_idle+0x73/0x7f
 [<c03a4dcd>] ? rest_init+0x61/0x63
 =======================

Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end()
around the padlock instructions fix the oops.

Suresh wrote:

These padlock instructions though don't use/touch SSE registers, but it behaves
similar to other SSE instructions. For example, it might cause DNA faults
when cr0.ts is set. While this is a spurious DNA trap, it might cause
oops with the recent fpu code changes.

This is the code sequence  that is probably causing this problem:

a) new app is getting exec'd and it is somewhere in between
   start_thread() and flush_old_exec() in the load_xyz_binary()

b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is
   cleared.

c) Now we get an interrupt/softirq which starts using these encrypt/decrypt
   routines in the network stack. This generates a math fault (as
   cr0.ts is '1') which sets TS_USEDFPU and restores the math that is
   in the task's xstate.

d) Return to exec code path, which does start_thread() which does
   free_thread_xstate() and sets xstate pointer to NULL while
   the TS_USEDFPU is still set.

e) At the next context switch from the new exec'd task to another task,
   we have a scenarios where TS_USEDFPU is set but xstate pointer is null.
   This can cause an oops during unlazy_fpu() in __switch_to()

Now:

1) This should happen with or with out pre-emption. Viro also encountered
   similar problem with out CONFIG_PREEMPT.

2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because
   kernel_fpu_begin() will manually do a clts() and won't run in to the
   situation of setting TS_USEDFPU in step "c" above.

3) This was working before the fpu changes, because its a spurious
   math fault  which doesn't corrupt any fpu/sse registers and the task's
   math state was always in an allocated state.

With out the recent lazy fpu allocation changes, while we don't see oops,
there is a possible race still present in older kernels(for example,
while kernel is using kernel_fpu_begin() in some optimized clear/copy
page and an interrupt/softirq happens which uses these padlock
instructions generating DNA fault).

This is the failing scenario that existed even before the lazy fpu allocation
changes:

0. CPU's TS flag is set

1. kernel using FPU in some optimized copy  routine and while doing
kernel_fpu_begin() takes an interrupt just before doing clts()

2. Takes an interrupt and ipsec uses padlock instruction. And we
take a DNA fault as TS flag is still set.

3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts

4. We complete the padlock routine

5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes
the optimized copy routine and does kernel_fpu_end(). At this point,
we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll
set and not cleared.

6. Now kernel resumes its user operation. And at the next context
switch, kernel sees it has do a FP save as TS_USEDFPU is still set
and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu()
will take a DNA fault, as cr0.ts is '1' and now, because we are
in __switch_to(), math_state_restore() will get confused and will
restore the next task's FP state and will save it in prev tasks's FP state.
Remember, in __switch_to() we are already on the stack of the next task
but take a DNA fault for the prev task.

This causes the fpu leakage.

Fix the padlock instruction usage by calling them inside the
context of new routines irq_ts_save/restore(), which clear/restore cr0.ts
manually in the interrupt context. This will not generate spurious DNA
in the  context of the interrupt which will fix the oops encountered and
the possible FPU leakage issue.
Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The top-level functions init/update/final were missing for ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The changeset ca786dc7

	crypto: hash - Fixed digest size check

missed one spot for the digest type.  This patch corrects that
error.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

My changeset 4b22f0dd

	crypto: tcrpyt - Remove unnecessary kmap/kunmap calls

introduced a typo that broke AEAD chunk testing.  In particular,
axbuf should really be xbuf.

There is also an issue with testing the last segment when encrypting.
The additional part produced by AEAD wasn't tested.  Similarly, on
decryption the additional part of the AEAD input is mistaken for
corruption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Later SEC revision requires the link table (used for scatter/gather)
to have an extra entry to account for the total length in descriptor [4],
which contains cipher Input and ICV.
This only applies to decrypt, not encrypt.
Without this change, on 837x, a gather return/length error results
when a decryption uses a link table to gather the fragments.
This is observed by doing a ping with size of 1447 or larger with AES,
or a ping with size 1455 or larger with 3des.

So, add check for SEC compatible "fsl,3.0" for using extra link table entry.
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ticket allocation code got reworked in 2.6.26 and we now free tickets
whereas before we used to cache them so the use-after-free went
undetected.

SGI-PV: 985525

SGI-Modid: xfs-linux-melb:xfs-kern:31877a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>

xfs_bmap_count_leaves and xfs_bmap_disk_count_leaves always return always
0, make them void.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31844a
Signed-off-by: Ruben Porras <ruben.porras@linworks.de>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.

In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>

Use KM_MAYFAIL for the m_perag allocation, we can deal with the error
easily and blocking forever during mount is not a good idea either.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31837a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

xfs_mount_free mostly frees the perag data, which is something that is
duplicated in the mount error path.

Move the XFS_QM_DONE call to the caller and remove the useless
mutex_destroy/spinlock_destroy calls so that we can re-use it for the
mount error path. Also rename it to xfs_free_perag to reflect what it
does.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31836a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

xfs_unmounts can't and shouldn't return errors so declare it as returning
void.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31833a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

Remove all the useless flags and code keyed off it in xfs_mountfs.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no
need to call file_update_time and then copy the values over to the XFS
inode. The only additional thing in file_update_time are checks not
applicable to the write path.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31829a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>

Port a little optmization from file_update_time to xfs_ichgtime, and only
update the timestamp and mark the inode dirty if the timestamp actually
changes in the timer tick resultion supported by the running kernel.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31827a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.

So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

Now that all users of the sema_t are gone from XFS we can finally kill it.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31823a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31822a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>

XFS object flushing doesn't quite match existing completion semantics.  It
mixed exclusive access with completion.  That is, we need to mark an object as
being flushed before flushing it to disk, and then block any other attempt to
flush it until the completion occurs.  We do this but adding an extra count to
the completion before we start using them.  However, we still need to
determine if there is a completion in progress, and allow no-blocking attempts
fo completions to decrement the count.

To do this we introduce:

int try_wait_for_completion(struct completion *x)
	returns a failure status if done == 0, otherwise decrements done
	to zero and returns a "started" status. This is provided
	to allow counted completions to begin safely while holding
	object locks in inverted order.

int completion_done(struct completion *x)
	returns 1 if there is no waiter, 0 if there is a waiter
	(i.e. a completion in progress).

This replaces the use of semaphores for providing this exclusion
and completion mechanism.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31816a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>