- 10 Sep, 2009 40 commits
-
-
Joe Eykholt authored
libfc receives PLOGIs from switches which are trying to discover what kind of devices are present, and from other initiators to find out if we're a target. As an initiator, some argue we don't need to handle incoming PLOGI requests, and we currently reject them from unknown remote ports, but accept them is we're in the middle of a PLOGI to the remote port. For eventual target implementations, we want to handle them always. For incoming PLOGI, don't fail if the rport_priv doesn't exist. Just create it and go become READY without going through PRLI. If PRLI occurs, then our roles will be set and we'll become READY again. Also, allow incoming PRLI in RTV state. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Joe Eykholt authored
Improve lport and rport debug messages to indicate whether the response is LS_ACC, LS_RJT, closed, or timeout. Signed-off-by:
-
Joe Eykholt authored
The rport_lookup function must be called while holding the disc_mutex. Otherwise, the rdata could be deleted just after that by another thread. All callers now check the state after grabbing the rdata rp_mutex. Even though rport_lookup skips ports in DELETE state, it does that without holding the rdata rp_mutex, so that the state may change. Signed-off-by:
-
Joe Eykholt authored
This moves the remote port lookup for incoming ELS requests into fc_rport.c, in preparation for handing PLOGI and LOGO from unknown rports. This changes the arg to rport_recv_req from an rdata to an lport. Signed-off-by:
-
Robert Love authored
Don't trust previous roles, reset them when we receive a PRLI. Signed-off-by:
-
Robert Love authored
Currently these values are initialized by the callers. This was exposed by a later patch that adds PLOGI request support. The patch failed to initialize the new remote port's roles and it caused problems. This patch has the rport_create routine initialize the identifiers and then the callers can override them with real values. Signed-off-by:
-
Joe Eykholt authored
It's possible to "restart" discovery before it was started if an RSCN is received early enough. We were jumping to 0 due to the disc_callback function pointer not getting set. Don't restart discovery if disc_callback is NULL. Signed-off-by:
-
Joe Eykholt authored
The discovery code had a special-case for the point-to-point mode, which used a bunch of code that wasn't really needed. Now that rport_create adds the rport to the discovery list, completely skip discovery for the point-to-point case. Signed-off-by:
-
Joe Eykholt authored
In fc_disc_gpn_ft_parse(), after fc_disc_done() is called, the disc state is changed by setting buf_len = 0. This is wrong since the discovery may have restarted. Instead, return after calling fc_disc_done. Also, return an error on memory allocation failure. Signed-off-by:
-
Joe Eykholt authored
Currently fc_disc_timeout() restarts discovery only if it is not pending. When the timer is scheduled, the discovery is left pending, so the timeout never restarts it. Fix by not checking for pending in the timeout handler. If discovery is stopped and restarted in the meantime, the timeout will be canceled. Also, when a new discovery is started, the retry count wasn't cleared. Signed-off-by:
-
Joe Eykholt authored
On some switches, an empty zone causes GPN_FT to be rejected with reason 9 (unable) explanation 7 (FC-4 types not registered), which causes discovery to be retried endlessly. Treat this as just an empty response and consider discovery complete. Signed-off-by:
-
Joe Eykholt authored
Abhijeet Joglekar wrote: "In gpn_ft_resp, if the payload is short, or unexpected response or out of sequence frame, then we just return and do nothing. We should either enter fc_disc_done() with DISC_EV_FAIL which will then restart any queued discovery requests or call lport module which will reset local port, or we should call fc_disc_error() so that the gpn_ft is retried. The situation as is causes discovery to remain pending and never get restarted, in these rare cases. We saw this due to a coding bug in fc_disc before. The only ways it could happen would be bugs, packet corruption or an FC fabric problem. Change it to fail discovery. The local port will restart discovery, although it probably should just give up until the next link flap. Signed-off-by:
-
Joe Eykholt authored
Code cleanup for fc_disc_gpn_ft_resp(). Some of the fc_disc.c code was poorly formatted. For example, some lines in fc_disc.c were unnecessarily truncated and the buf variable could be eliminated. Also moved the increment of seq_count into fc_disc_gpn_ft_parse(), to avoid doing it separately before each call. Signed-off-by:
-
Joe Eykholt authored
When an RSCN is received during fabric discovery, it restarts. After the restart, disc->seq_count was incremented, so when the first frame was received, it was considered "out of sequence". That left the state disc->active, preventing further discoveries. Change to advance the sequence count before parsing, so that it won't be changed after a potential restart. Signed-off-by:
-
Joe Eykholt authored
When receiving an RSCN, do not log off all rports. This is extremely disruptive. If, after the GPN_FT response, some rports haven't been listed, delete them. Add field disc_id to structs fc_rport_priv and fc_disc. disc_id is an arbitrary serial number used to identify the rports found by the latest discovery. This eliminates the need to go through the rport list when restarting discovery. Signed-off-by:
-
Joe Eykholt authored
Move the libfc remote port lookup function into fc_rport.c. This seems like the best place for it. Signed-off-by:
-
Joe Eykholt authored
Since the rport list maintenance is now done in the rport module, the callback (and ops) are usually not necessary. Allow rdata->ops to be left NULL if nothing needs to be done in an event callback. Signed-off-by:
-
Joe Eykholt authored
For future discovery patches, change rport_create to return a previously created rport_priv that has the FC_ID as long as it isn't in deleted state. Signed-off-by:
-
Joe Eykholt authored
The list of remote ports (struct fc_rport_priv) has been maintained by the discovery module. In preparation for having lport->tt.rport_create() do a lookup first, maintain the rports list in the rport module. It will still be protected by the disc_mutex. The DNS rport is an exception for until after further patches. For now, do not add it to the list. The point-to-point rport will be in the discovery list. So at shutdown, it doesn't need to be separately logged out. Signed-off-by:
-
Joe Eykholt authored
The lport rport callback can only be called for the dNS rport, since its the only rport who's ops point to that function. Remove unnecessary checking and debug messages. Put the locking outside the switch statement as a simplification. Signed-off-by:
-
Joe Eykholt authored
Don't print large negative decimal numbers for frame pointers in the debug messages from fc_rport_error(). Just print 0 if its a frame pointer, and print the error numbers as positive. Signed-off-by:
-
Joe Eykholt authored
Delete unused disc->delay element. Signed-off-by:
-
Joe Eykholt authored
There was no need to have the discovery status stored in struct fc_disc. Change fc_disc_done() to take the discovery status as an argument and just pass it on to the discovery callback. Signed-off-by:
-
Joe Eykholt authored
When a remote port becomes ready and a LOGO is received before the READY event is in rport_work waiting on the mutex, the event is changed to LOGO and the work queued, so both the calls to rport_work see the LOGO event, and both try to do the list_del(), causing a crash. Don't change the event if it is already set. Signed-off-by:
-
Joe Eykholt authored
Don't create a "dummy" remote port to go with fc_rport_priv. Make the rport truly optional by allocating fc_rport_priv separately and not requiring a dummy rport to be there if we haven't yet done fc_remote_port_add(). The fc_rport_libfc_priv remains as a structure attached to the rport for I/O purposes. Be sure to hold references on rdata when the lock is dropped in fc_rport_work(). Signed-off-by:
-
Joe Eykholt authored
Remote ports will become READY more than once after ADISC is implemented in a later patch. The event callback that has been called "CREATED" will mean "READY". Rename it now in preparation for those changes. Signed-off-by:
-
Joe Eykholt authored
This is a cleanup without semantic changes to use a switch statement instead of a series of if-statements in fc_rport_work(), and to move some declarations up to the top. Signed-off-by:
-
Joe Eykholt authored
Allow a struct fc_rport_priv to have no fc_rport associated with it. This sets up to remove the need for "rogue" rports. Add a few fields to fc_rport_priv that are needed before the fc_rport is created. These are the ids, maxframe_size, classes, and rport pointer. Remove the macro PRIV_TO_RPORT(). Just use rdata->rport where appropriate. To take the place of the get_device()/put_device ops that were used to hold both the rport and rdata, add a reference count to rdata structures using kref. When kref_get decrements the refcount to zero, a new template function releasing the rdata should be called. This will take care of freeing the rdata and releasing the hold on the rport (for now). After subsequent patches make the rport truly optional, this release function will simply free the rdata. Remove the simple inline function fc_rport_set_name(), which becomes semanticly ambiguous otherwise. The caller will set the port_name and node_name in the rdata->Ids, which will later be copied to the rport when it its created. Signed-off-by:
-
Joe Eykholt authored
tt.elsct_send is used by both FCP and by the rport state machine. After further patches, these two modules will use different structures for the remote port. So, change elsct_send to use the FC_ID instead of the fc_rport_priv as its argument. It currently only uses the FC_ID anyway. For CT requests the destination FC_ID is still implicitly 0xfffffc. After further patches the did arg on CT requests will be used to specify the FC_ID being inquired about for GPN_ID or other queries. Signed-off-by:
-
Joe Eykholt authored
The rport and discovery modules deal with remote ports before fc_remote_port_add() can be done, because the full set of rport identifiers is not known at early stages. In preparation for splitting the fc_rport/fc_rport_priv allocation, make fc_rport_priv the primary interface for the remote port and discovery engines. The FCP / SCSI layers still deal with fc_rport and fc_rport_libfc_priv, however. Signed-off-by:
-
Joe Eykholt authored
These macros introduce extra undesirable semicolons that keep them from being used in expressions, and they don't protect against being passed an expression. Add parens and remove the semicolons. Signed-off-by:
-
Joe Eykholt authored
The interface for lport->tt.rport_create() takes a fc_disc_port arg, which is unnatural for most calls. The only reason for this was to avoid passing in the local port as an argument, but otherwise added to complexity. Simplify by just using lport and fc_rport_identifiers. Signed-off-by:
-
Joe Eykholt authored
While the I/O and LLD interfaces use fc_rport_libfc_priv, the disc and rport interfaces will use fc_rport_priv, which will be separately allocated. Change the disc and rport usage of fc_rport_libfc_priv to fc_rport_priv. Use #define temporarily to make both names equivalent until a subsequent patch splits them. Signed-off-by:
-
Chris Leech authored
This just cuts down on the number of locks we're dealing with, and eliminates the need to take another lock in the netdev notifier. Signed-off-by:
Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Chris Leech authored
Fixes reference counting on fcoe_instance and net_device, and adds NETDEV_UNREGISTER notifier handling so that you can unload network drivers. FCoE no longer increments the module use count for the network driver. On an NETDEV_UNREGISTER event, destroying the FCoE instance is deferred to a workqueue context to avoid RTNL deadlocks. Based in part by an earlier patch from John Fastabend John's patch description: Currently, the netdev module ref count is not decremented with module_put() when the module is unloaded while fcoe instances are present. To fix this removed reference count on netdev module completely and added functionality to netdev event handling for NETDEV_UNREGISTER events. This allows fcoe to remove devices cleanly when the netdev module is unloaded so we no longer need to hold a reference count for the netdev module. Signed-off-by:
-
Chris Leech authored
We only want the FCoE create and destroy routines to deal with top level N_Ports, the VN_Ports are tracked on the vport list (see scsi_transport_fc). Signed-off-by:
-
Chris Leech authored
Rather than rely on the hostlist_lock to be held while creating exchange managers, serialize fcoe instance creation and destruction with a mutex. This will allow the hostlist addition to be moved out of fcoe_if_create(), which will simplify NPIV support. Signed-off-by:
-
Chris Leech authored
fcoe_netdev_config() is called during initialization of a libfc instance. Much of what was there only needs to be done once for each net_device. The same goes for the corresponding cleanup. The FIP controller initialization is moved to interface creation time. Otherwise it will keep getting re-initialized for every VN_Port once NPIV is enabled. fcoe_if_destroy() has some reordering to deal with the changes. Receives are not stopped until after fcoe_interface_put() is called, but transmits must be stopped before. So there is some care to stop libfc transmits and the transmit backlog timer, then call fcoe_interface_put which will stop receives and cleanup the FIP controller, then the receive queues can be cleaned and the port freed. Signed-off-by:
-
Chris Leech authored
Up to this point the fcoe_instance structure was simply kzalloc/kfreed. This patch introduces create and destroy functions as well as kref based reference counting. The create function will grow as the initialization code is moved there. Signed-off-by:
-
Chris Leech authored
The priv pointer is no longer needed, and once NPIV is enabled fcoe_interface:fc_lport becomes a one-to-many relationship. Remove the single pointer. Signed-off-by:
-
