- 25 Feb, 2009 25 commits
-
-
Dave Jones authored
Signed-off-by:Dave Jones <davej@redhat.com>
-
Thomas Renninger authored
This is the typical message you get if you plug in a CPU which is newer than your BIOS. It's annoying seeing this message for each core. Signed-off-by:
Thomas Renninger <trenn@suse.de> Signed-off-by:
-
Thomas Renninger authored
Limit sampling rate to transition_latency * 100 or kernel limits. If sampling_rate is tried to be set too low, set the lowest allowed value. Signed-off-by:
-
Thomas Renninger authored
The same info can be obtained via the transition_latency sysfs file Signed-off-by:
-
Thomas Renninger authored
powernow-k8 driver should always try to get cpufreq info from ACPI. Otherwise it will not be able to detect the transition latency correctly which results in ondemand governor taking a wrong sampling rate which will then result in sever performance loss. Let the user not shoot himself in the foot and always compile in ACPI support for powernow-k8. This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and #ifndef CONFIG_ACPI_PROCESSOR path is chosen. Signed-off-by:
-
Thomas Renninger authored
It's not only useful for the ondemand and conservative governors, but also for userspace daemons to know about the HW transition latency of the CPU. It is especially useful for userspace to know about this value when the ondemand or conservative governors are run. The sampling rate control value depends on it and for userspace being able to set sane tuning values there it has to know about the transition latency. Signed-off-by:
-
Dave Jones authored
This driver has so many long function names, and deep nested if's The remaining warnings will need some code restructuring to clean up. Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
The asm/timer.h warning can be ignored, it's needed for recalibrate_cpu_khz() Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
The remaining warning about the simple_strtoul conversion to strict_strtoul seems kind of pointless to me. Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
Signed-off-by: -
Dave Jones authored
GNU indent complains about this being ambiguous, because it's dumb. One of my automated tests relies on the output of indent, so this shuts it up. Signed-off-by:
-
- 24 Feb, 2009 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/procLinus Torvalds authored
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: proc: fix PG_locked reporting in /proc/kpageflags
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: Add i2c_board_info for RiscPC PCF8583 i2c: Make sure i2c_algo_bit_data.timeout is HZ-independent i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT i2c: Timeouts reach -1 i2c: Fix misplaced parentheses
-
Linus Torvalds authored
Merge branch 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firedtv: dvb_frontend_info for FireDTV S2, fix "frequency limits undefined" error firedtv: massive refactoring firedtv: rename files, variables, functions from firesat to firedtv firedtv: Use DEFINE_SPINLOCK firedtv: fix registration - adapter number could only be zero firedtv: use length_field() of PMT as length firedtv: fix returned struct for ca_info firedtv: cleanups and minor fixes ieee1394: remove superfluous assertions ieee1394: inherit ud vendor_id from node vendor_id ieee1394: add hpsb_node_read() and hpsb_node_lock() ieee1394: use correct barrier types between accesses of nodeid and generation firesat: copyrights, rename to firedtv, API conversions, fix remote control input firesat: avc resend firesat: update isochronous interface, add CI support firesat: add DVB-S support for DVB-S2 devices firesat: fix DVB-S2 device recognition DVB: add firesat driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin() ext4: Add fallback for find_group_flex
-
Russell King authored
Add the necessary i2c_board_info structure to fix the lack of PCF8583 RTC on RiscPC. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
-
Jean Delvare authored
i2c_algo_bit_data.timeout is supposed to be in jiffies, so drivers should use set this value in terms of HZ. Ultimately I think this field should be discarded in favor of i2c_adapter.timeout, but that's left for a future patch. Signed-off-by:
Lennert Buytenhek <kernel@wantstofly.org> Acked-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca>
-
Jean Delvare authored
The unit in which user-space can set the bus timeout value is jiffies for historical reasons (back when HZ was always 100.) This is however not good because user-space doesn't know how long a jiffy lasts. The timeout value should instead be set in a fixed time unit. Given the original value of HZ, this unit should be 10 ms, for compatibility. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de>
-
Roel Kluin authored
With a postfix decrement these timeouts reach -1 rather than 0, but after the loop it is tested whether they have become 0. As pointed out by Jean Delvare, the condition we are waiting for should also be tested before the timeout. With the current order, you could exit with a timeout error while the job is actually done. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Roel Kluin authored
Fix misplaced parentheses. Signed-off-by:
-
Helge Bahmann authored
Expr always evaluates to zero. Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com>
-
Beat Michel Liechti authored
I found that the function fdtv_frontend_init in the file firedtv-fe.c was missing a case for FIREDTV_DVB_S2 which resulted in "frequency limits undefined" errors in syslog. Signed-off-by:
Beat Michel Liechti <bml303@gmail.com> Change by Stefan R: combine it with case case FIREDTV_DVB_S as originally suggested by Beat Michel. This enables FE_CAN_FEC_AUTO also for FireDTV-S2 devices which is possible as long as only DVB-S channels are used. FE_CAN_FEC_AUTO would be wrong for DVB-S2 channels, but those cannot be used yet since the driver is not yet converted to S2API. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de>
-
Stefan Richter authored
Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: -
Rambaldi authored
Combination of the following changes: Sat, 17 Jan 2009 14:47:34 +0100 firedtv: rename variables and functions from firesat to firedtv Signed-off-by:
Rambaldi <Rambaldi@xs4all.nl> Additional changes by Stefan Richter: Renamed struct firedtv *firedtv to struct firedtv *fdtv and firedtv_foo_bar() to fdtv_foo_bar() for brevity. Sat, 17 Jan 2009 13:07:44 +0100 firedtv: rename files from firesat to firedtv Signed-off-by:
-
Julia Lawall authored
SPIN_LOCK_UNLOCKED is deprecated. The following makes the change suggested in Documentation/spinlocks.txt Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Henrik Kurelid authored
There was a bug causing the initialization to fail if adapter number was greater than zero. The adapter was however registered which caused the driver to oops the second time initialization was tried. Signed-off-by:
Henrik Kurelid <henrik@kurelid.se> Signed-off-by:
-
