- 31 Aug, 2009 4 commits
-
-
Frederic Weisbecker authored
The cmd-trace tool used the cmdline file and resolved the idle thread using a hardcoded check for the 0 task pid. Now we have a centralized way to do that from perf using register_idle_thread() API. Before: :0-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name :0-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name After: [idle]-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name [idle]-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251693921-6579-2-git-send-email-fweisbec@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Frederic Weisbecker authored
Librarize register_idle_thread() used by annotate and report. Signed-off-by:
-
Frederic Weisbecker authored
Add missing documentation for the following parameters: - perf record -R - perf report -g Signed-off-by:
-
Ingo Molnar authored
Merge reason: this topic is ready now to merge into the main development branch for .32, with functional perf trace output. Signed-off-by:
-
- 28 Aug, 2009 3 commits
-
-
Pierre Habouzit authored
This improves patch fa6963b2 so that perf.data stuff that has been dumped as root can be read (annotate/report) by a user without the use of the --force. Rationale is that root has plenty of ways to screw us (usually) that do not require twisted schemes involving specially crafting a perf.data. Signed-off-by:
Pierre Habouzit <pierre.habouzit@intersec.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <20090827075902.GF19653@laphroaig.corp> Signed-off-by:
-
Frederic Weisbecker authored
Some string fields are not printed because of a missing printf in the post-processing. Before: perf-10070 [000] 0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120] geany-5720 [000] 0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120] perf-10070 [000] 0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120] geany-5720 [000] 0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120] <idle>-0 [000] 0.000000: sched_switch: task :0 [140] (R) ==> :361 [115] After: perf-10070 [000] 0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120] geany-5720 [000] 0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120] perf-10070 [000] 0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120] geany-5720 [000] 0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120] <idle>-0 [000] 0.000000: sched_switch: task swapper:0 [140] (R) ==> kondemand/1:361 [115] Signed-off-by: -
Frederic Weisbecker authored
While opening a trace event counter, every events are saved in the trace.info file. But we only want to save the specifications of the events we are using. Signed-off-by:
-
- 26 Aug, 2009 1 commit
-
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090826145126.GA5255@ghostprotocols.net> Signed-off-by:
-
- 25 Aug, 2009 2 commits
-
-
Peter Zijlstra authored
Provide the ability to configure a counter to send its output to another (already existing) counter's output stream. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: stephane eranian <eranian@googlemail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090819092023.980284148@chello.nl> Signed-off-by:
-
Paul Mackerras authored
Currently, if a group is created where the group leader is initially disabled but a non-leader member is initially enabled, and then the leader is subsequently enabled some time later, the time_enabled for the non-leader member will reflect the whole time since it was created, not just the time since the leader was enabled. This is incorrect, because all of the members are effectively disabled while the leader is disabled, since none of the members can go on the PMU if the leader can't. Thus we have to update the ->tstamp_enabled for all the enabled group members when a group leader is enabled, so that the time_enabled computation only counts the time since the leader was enabled. Similarly, when disabling a group leader we have to update the time_enabled and time_running for all of the group members. Also, in update_counter_times, we have to treat a counter whose group leader is disabled as being disabled. Reported-by:
Stephane Eranian <eranian@googlemail.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
-
- 24 Aug, 2009 1 commit
-
-
Ingo Molnar authored
Conflicts: tools/perf/builtin-annotate.c tools/perf/builtin-report.c Merge reason: resolve these conflicts. Signed-off-by:
-
- 21 Aug, 2009 2 commits
-
-
Masami Hiramatsu authored
Add OPT_END to option array of perf-trace for fixing a SEGV bug when showing perf-trace help message. Without this patch; ./perf trace -h usage: perf trace [<options>] <command> -D, --dump-raw-trace dump raw trace in ASCII -v, --verbose be more verbose (show symbol address, etc) -f, Segmentation fault With this patch: ./perf trace -h usage: perf trace [<options>] <command> -D, --dump-raw-trace dump raw trace in ASCII -v, --verbose be more verbose (show symbol address, etc) Signed-off-by:Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20090821185603.11039.62109.stgit@localhost.localdomain> Signed-off-by:
-
Peter Zijlstra authored
When you iterate a list, using the iterator is useful. Before: ID: 5 ID: 5 ID: 5 ID: 5 EVNT: 0x40088b scale: nan ID: 5 CNT: 1006252 ID: 6 CNT: 1011090 ID: 7 CNT: 1011196 ID: 8 CNT: 1011095 EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 2003065 ID: 6 CNT: 2011671 ID: 7 CNT: 2012620 ID: 8 CNT: 2013479 EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 3002390 ID: 6 CNT: 3015996 ID: 7 CNT: 3018019 ID: 8 CNT: 3020006 EVNT: 0x40088b scale: 1.000000 ID: 5 CNT: 4002406 ID: 6 CNT: 4021120 ID: 7 CNT: 4024241 ID: 8 CNT: 4027059 After: ID: 1 ID: 2 ID: 3 ID: 4 EVNT: 0x400889 scale: nan ID: 1 CNT: 1005270 ID: 2 CNT: 1009833 ID: 3 CNT: 1010065 ID: 4 CNT: 1010088 EVNT: 0x400898 scale: nan ID: 1 CNT: 2001531 ID: 2 CNT: 2022309 ID: 3 CNT: 2022470 ID: 4 CNT: 2022627 EVNT: 0x400888 scale: 0.489467 ID: 1 CNT: 3001261 ID: 2 CNT: 3027088 ID: 3 CNT: 3027941 ID: 4 CNT: 3028762 Reported-by:
-
- 19 Aug, 2009 1 commit
-
-
Peter Zijlstra authored
Add an owner check to opening perf.data files and a switch to silence it. Because perf-report/perf-annotate are binary parsers reading another users' perf.data file could be a security risk if the file were explicitly engineered to trigger bugs in the parser (we hope of course there are non such bugs, but you never know). Signed-off-by:
-
- 18 Aug, 2009 10 commits
-
-
Kyle McMartin authored
pushd tools/perf/Documentation make html popd is failing for me... ASCIIDOC perf-annotate.html ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11.css ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11-manpage.css ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11-quirks.css make: *** [perf-annotate.html] Error 1 Apparently asciidoc "unsafe" is the default mode of operation in practice. https://bugzilla.redhat.com/show_bug.cgi?id=506953 Works tidily now. Signed-off-by:Kyle McMartin <kyle@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090818164125.GM25206@bombadil.infradead.org> Signed-off-by:
-
Frederic Weisbecker authored
The librarization of the thread helpers between annotate and report lost some perf report specifics. thread__insert_map() had its most uptodate version in perf report which cared about partial map overlapping. In case of overlap between two maps, perf annotate's version removes the whole old map without considering if it partially or absolutely overlaps the new map. We exported the odd version, change it by using the perf report version. Signed-off-by:
-
Frederic Weisbecker authored
The librarization of the thread helpers between annotate and report lost some perf report specifics. This patch fixes the thread comm column adjusting that has been omitted during this export. Signed-off-by:
-
Ingo Molnar authored
Linus reported this perf annotate segfault: [torvalds@nehalem git]$ perf annotate unmap_vmas Segmentation fault #0 map__clone (self=<value optimized out>) at builtin-annotate.c:236 #1 thread__fork (self=<value optimized out>) at builtin-annotate.c:372 The bug here was that builtin-annotate.c was a copy of builtin-report.c and a threading related fix to builtin-report.c didnt get propagated to builtin-annotate.c ... Reported-by:Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
Ingo Molnar authored
PARISC does not build: /home/mingo/tip/kernel/perf_counter.c: In function 'perf_counter_index': /home/mingo/tip/kernel/perf_counter.c:2016: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared (first use in this function) /home/mingo/tip/kernel/perf_counter.c:2016: error: (Each undeclared identifier is reported only once /home/mingo/tip/kernel/perf_counter.c:2016: error: for each function it appears in.) As PERF_COUNTER_INDEX_OFFSET is not defined. Now, we could define it in the architecture - but lets also provide a core default of 0 (which happens to be what all but one architecture uses at the moment). Architectures that need a different index offset should set this value in their asm/perf_counter.h files. Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
The _XOPEN_SOURCE* defines are not really needed on Linux and it's not like we'll port this to AIX ;-) The define also broke the build with gcc 4.4.1: CC util/trace-event-parse.o In file included from util/trace-event-parse.c:32: util/util.h:43:1: error: "_XOPEN_SOURCE" redefined So remove them. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perfcounters into perfcounters/core
-
Paul Mackerras authored
This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Paul Mackerras authored
This provides a mechanism to allow the perf_counters code to access user memory in a PMU interrupt routine. Such an access can cause various kinds of interrupt: SLB miss, MMU hash table miss, segment table miss, or TLB miss, depending on the processor. This commit only deals with 64-bit classic/server processors, which use an MMU hash table. 32-bit processors are already able to access user memory at interrupt time. Since we don't soft-disable on 32-bit, we avoid the possibility of reentering hash_page or the TLB miss handlers, since they run with interrupts disabled. On 64-bit processors, an SLB miss interrupt on a user address will update the slb_cache and slb_cache_ptr fields in the paca. This is OK except in the case where a PMU interrupt occurs in switch_slb, which also accesses those fields. To prevent this, we hard-disable interrupts in switch_slb. Interrupts are already soft-disabled at this point, and will get hard-enabled when they get soft-enabled later. This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice, and to make sure that it clears the slb_cache_ptr when called from other callers than switch_slb, the existing routine is renamed to __slb_flush_and_rebolt, which is called by switch_slb and the new version of slb_flush_and_rebolt. Similarly, switch_stab (used on POWER3 and RS64 processors) gets a hard_irq_disable() to protect the per-cpu variables used there and in ste_allocate. If a MMU hashtable miss interrupt occurs, normally we would call hash_page to look up the Linux PTE for the address and create a HPTE. However, hash_page is fairly complex and takes some locks, so to avoid the possibility of deadlock, we check the preemption count to see if we are in a (pseudo-)NMI handler, and if so, we don't call hash_page but instead treat it like a bad access that will get reported up through the exception table mechanism. An interrupt whose handler runs even though the interrupt occurred when soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI handler, which should use nmi_enter()/nmi_exit() rather than irq_enter()/irq_exit(). Acked-by:
-
Paul Mackerras authored
On 32-bit systems with 64-bit PTEs, the PTEs have to be written in two 32-bit halves. On SMP we write the higher-order half and then the lower-order half, with a write barrier between the two halves, but on UP there was no particular ordering of the writes to the two halves. This extends the ordering that we already do on SMP to the UP case as well. The reason is that with the perf_counter subsystem potentially accessing user memory at interrupt time to get stack traces, we have to be careful not to create an incorrect but apparently valid PTE even on UP. Acked-by:
-
- 17 Aug, 2009 10 commits
-
-
Frederic Weisbecker authored
The ftrace event format parser handles the usual casts but not the cast to pointers. Such casts have been introduced recently with the module trace events and raise the following parsing error: Fatal: bad op token ) This is because it considers the "*" character as a binary operator. Make it then aware of casts to pointers. Signed-off-by:
-
Frederic Weisbecker authored
You can enable a counter's PERF_SAMPLE_RAW attribute in two fashions: - using the -R option (every counters get PERF_SAMPLE_RAW) - using the :record suffix in a trace event counter name Currently we record the events info in a trace.info file from perf record when the former method is used but we omit it with the latter. Check both situations. Signed-off-by:
-
Frederic Weisbecker authored
When a user runs perf trace using an input with logged counters without PERF_SAMPLE_RAW attribute, warn by giving a nice tip. Signed-off-by:
-
Frederic Weisbecker authored
While running perf report -g in a perf.data file that hasn't been recorded in callchain mode, the error reported has a spelling issue: ./perf report -g selected -c but no callchain data. Did you call perf record without -g? Fix it. Signed-off-by:
-
Frederic Weisbecker authored
This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: -
Steven Rostedt authored
Add util/trace-event-parse.c which provides the handlers to parse the ftrace events info from the stream and handles the ftrace perf samples event printing. This file is a rename of the parse-events.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is a perf tools integration. [ fweisbec@gmail.com: various changes for perf tools integration. ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt authored
Add util/trace-event-read.c which handles trace events informations reading. This file is a rename of the trace-read.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is its perf tools integration. [ fweisbec@gmail.com: various changes for perf tools integration. ] Signed-off-by:
-
Steven Rostedt authored
Add util/trace-event-info.c which handles ftrace file IO from debugfs and provides general helpers to fetch/save ftrace events informations. This file is a rename of the trace-cmd.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is a perf tools integration. For now, ftrace events information is saved in a separate file than the standard perf.data [fweisbec@gmail.com: various changes for perf tools integration] Signed-off-by:
-
Paul Mackerras authored
In general, code in perf_counter.c that is called through an IPI checks, for per-task counters, that the counter's task is still the current task. This is to handle the race condition where the cpu switches from the task we want to another task in the interval between sending the IPI and the IPI arriving and being handled on the target CPU. For some reason, __perf_counter_read is missing this check, yet there is no reason why the race condition can't occur. This adds a check that the current task is the one we want. If it isn't, we just return. In that case the counter->count value should be up to date, since it will have been updated when the counter was scheduled out, which must have happened since the IPI was sent. I don't have an example of an actual failure due to this race, but it seems obvious that it could occur and we need to guard against it. Signed-off-by:
-
Carlos R. Mafra authored
Rename it to examples.txt to avoid the perf-*.txt pattern in the Makefile, otherwise 'make doc' fails because perf-examples.txt is not formatted to be a man page: ERROR: perf-examples.txt: line 1: manpage document title is mandatory Signed-off-by:
Carlos R. Mafra <crmafra@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by:
-
- 16 Aug, 2009 6 commits
-
-
Frederic Weisbecker authored
Librarize trace_event() helper so that perf trace can use it too. Also clean up the debug.h includes a bit. It's not good to have it included in perf.h because it doesn't make it flexible against other headers it may need (headers that can also depend on perf.h and then create a recursive header dependency). Signed-off-by:
-
Frederic Weisbecker authored
Librarize the sample type and attr fetching from perf data file headers so that we can also use it from perf trace. Signed-off-by:
-
Frederic Weisbecker authored
Annotate and report share the same flags to filter events considering their context (kernel, user, hypervisor). Both tools have their own definitions of these flags. Factorize them out into the event headers file. Signed-off-by:
-
Frederic Weisbecker authored
We have two users of dprintf: report and annotate. Another one is coming with perf trace. Then factorize it into the debug file. While at it, rename dprintf() to dump_printf() so that it doesn't conflicts with its libc homograph. Signed-off-by:
-
Frederic Weisbecker authored
The soon coming perf trace needs to use printf with dynamically built formats. But we are using -Wformat=2 which is a shortcut for the following set: -Wformat -Wformat-security -Wformat-y2k -Wformat-nonliteral -Wformat-nonliteral warns when it can't check formats because they are not builtin constant strings, but we want to feature dynamic formats. What we want instead is Wformat=2 minus -Wformat-nonliteral, which is what this patch does. Signed-off-by:
-
Ingo Molnar authored
Up our defences a bit. Suggested-by:
Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
