ARM: OMAP: OMAP34XXCAM: Camera Base Address.

Adding OMAP 3 Camera registers base address, and Platform Device.
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Sameer Venkatraman <sameerv@ti.com>
Signed-off-by: Mohit Jalori <mjalori@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch loads the triton2 (twl4030) with scripts that will cut off VDD1
and VDD2 voltages when SYS_OFF_MODE signal is set.
Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add sysfs cover_switch with the status of cover.
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add slot_name entry to sysfs.
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Acked-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Re-organizing some goto at hsmmc probe.
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Readable output for IRQ status register
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Acked-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Do not try to call board specific suspend / resume functions if there
is no such.
Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Enable 4-bit support for HSMMC.

This patch provides the fix to enable 4-bit support for HSMMC.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: purushotam<purushotam@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Minor cleanups to omap 2430/34xx/35x musb_hdrc init:

 - num_eps is 16; here, each one is bidirectional
 - use DMA_32BIT_MASK to prevent confusion/errors
 - initialize root port power to reflect 100 mA limit

This still hard-wires some board-specific data, since there
are no hooks through which different boards can provide the
right data to the init code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

csi2_96m_fck no longer should attempt to init its clockdomain pointer; the
clock framework now does this by default.  Applies on top of the "Update
powerdomains and clockdomains" series sent earlier.

Verified on 3430SDP ES2.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This seems to be the right naming and allows using vanilla gcc.

See also:

http://sourceware.org/ml/binutils/2006-12/msg00149.htmlSigned-off-by: Koen Kooi <k.kooi@student.utwente.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Now we have Catalin's cache patch applied, which should eventually
hit mainline at some point.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Show the cache type of ARMv7 CPUs
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The i2c driver contains a while loop that has no timeout.  If i2c is in a
funky state and OMAP_I2C_CON_STT remains asserted, the kernel hangs.  Insert
the standard i2c timeout into the loop.
Signed-off-by: Jason P Marini <jason.marini@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The gfx_plane doesn't support scaling.
Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Prune off a empty line.

Fix omapfb's problem on OMAP3430sdp.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge branches 'master' and 'linus'

Conflicts:

	arch/arm/mach-omap1/mcbsp.c
	arch/arm/mach-omap2/mcbsp.c
	arch/arm/plat-omap/include/mach/mcbsp.h
	arch/arm/plat-omap/mcbsp.c

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv6: Fix OOPS in ip6_dst_lookup_tail().
  ipsec: Restore larval states and socket policies in dump
  [Bluetooth] Reject L2CAP connections on an insecure ACL link
  [Bluetooth] Enforce correct authentication requirements
  [Bluetooth] Fix reference counting during ACL config stage

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Disable timer interrupts in fixup_irqs().

This fixes kernel bugzilla 11469: "TUN with 1024 neighbours:
ip6_dst_lookup_tail NULL crash"

dst->neighbour is not necessarily hooked up at this point
in the processing path, so blindly dereferencing it is
the wrong thing to do.  This NULL check exists in other
similar paths and this case was just an oversight.

Also fix the completely wrong and confusing indentation
here while we're at it.

Based upon a patch by Evgeniy Polyakov.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevents: remove WARN_ON which was used to gather information

This is to be in sync with Russell's commit 7c7095aa.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is to be in sync with Russell's commit 0062f104.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is to be in sync with Russell's patch 690b5a13.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The issue of the endless reprogramming loop due to a too small
min_delta_ns was fixed with the previous updates of the clock events
code, but we had no information about the spread of this problem. I
added a WARN_ON to get automated information via kerneloops.org and to
get some direct reports, which allowed me to analyse the affected
machines.

The WARN_ON has served its purpose and would be annoying for a release
kernel. Remove it and just keep the information about the increase of
the min_delta_ns value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix memmap=exactmap boot argument
  x86: disable static NOPLs on 32 bits
  xen: fix 2.6.27-rc5 xen balloon driver warnings

When using kdump modifying the e820 map is yielding strange results.

For example starting with

 BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000100 - 0000000000093400 (usable)
 BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
 BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data)
 BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
 BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)

and booting with args

memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K

resulted in:

 user-defined physical RAM map:
 user: 0000000000000000 - 0000000000093400 (usable)
 user: 0000000000093400 - 00000000000a0000 (reserved)
 user: 0000000000100000 - 000000003fee0000 (usable)
 user: 000000003fee0000 - 000000003fef3000 (ACPI data)
 user: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
 user: 000000003ff80000 - 0000000040000000 (reserved)
 user: 00000000e0000000 - 00000000f0000000 (reserved)
 user: 00000000fec00000 - 00000000fec10000 (reserved)
 user: 00000000fee00000 - 00000000fee01000 (reserved)
 user: 00000000ff000000 - 0000000100000000 (reserved)

But should have resulted in:

 user-defined physical RAM map:
 user: 0000000000000000 - 00000000000a0000 (usable)
 user: 0000000001000000 - 000000000151b000 (usable)
 user: 00000000015bb000 - 0000000008ffc000 (usable)
 user: 000000003fee0000 - 000000003ff80000 (ACPI data)

This is happening because of an improper usage of strcmp() in the
e820 parsing code.  The strcmp() always returns !0 and never resets the
value for e820.nr_map and returns an incorrect user-defined map.

This patch fixes the problem.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: allow offline processing for disconnected devices
  [S390] cio: handle ssch() return codes correctly.
  [S390] cio: Correct cleanup on error.
  [S390] CVE-2008-1514: prevent ptrace padding area read/write in 31-bit mode

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP22: Fix detection of second HPC3 on Challenge S

* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6:
  UBIFS: make minimum fanout 3
  UBIFS: fix division by zero
  UBIFS: amend f_fsid
  UBIFS: fill f_fsid
  UBIFS: improve statfs reporting even more
  UBIFS: introduce LEB overhead
  UBIFS: add forgotten gc_idx_lebs component
  UBIFS: fix assertion
  UBIFS: improve statfs reporting
  UBIFS: remove incorrect index space check
  UBIFS: push empty flash hack down
  UBIFS: do not update min_idx_lebs in stafs
  UBIFS: allow for racing between GC and TNC
  UBIFS: always read hashed-key nodes under TNC mutex
  UBIFS: fix zero-length truncations

It was introduced by "vsprintf: add support for '%pS' and '%pF' pointer
formats" in commit 0fe1ef24.  However,
the current way its coded doesn't work on parisc64.  For two reasons: 1)
parisc isn't in the #ifdef and 2) parisc has a different format for
function descriptors

Make dereference_function_descriptor() more accommodating by allowing
architecture overrides.  I put the three overrides (for parisc64, ppc64
and ia64) in arch/kernel/module.c because that's where the kernel
internal linker which knows how to deal with function descriptors sits.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jie Yang at Atheros is getting more directly involved with upstream work
on the atl* drivers.  This patch changes the ATL1 entry to ATLX (atl2
support posted to netdev today) and adds him as a maintainer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the 2.6.27 circle ->fasync lost the BKL, and the last remaining
->open variant that takes the BKL is also gone.  ->get_sb and ->kill_sb
didn't have BKL forever, so updated the entries while we're at that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As pointed out by Adrian Hunter.
Signed-off-by: Tony Lindren <tony@atomide.com>

RTC generates an extra spurious interrupt for every actual periodic
interrupt. This is due to a problem with the RTC_IT bit of
REG_PWR_ISR1. It requires two writes or two reads (when COR is
enabled) to clear it. Since COR is enabled and one read of the same
register is done already (inside twl4030-pwrirq.c do_twl4030_pwrirq()
function), we can do away with a need to add one more write into the
same register inside the interrupt handler, by replacing the write
currently present with just one extra read.
Signed-off-by: Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Some rtc-twl4030 cleanup, which among other things adds up to
using about 10% less object code:

 - Remove:
    * broken/unfixable "periodic" IRQ support (2^N Hz)
    * duplicated constants in the header file
    * pointless stuff:
       + support for settable epoch
       + memset() calls
       + indirection when reading time and alarm
       + indirection when enabling irqs
    * needless ifdeffery for reading irq enable register
 - IRQ updates:
    * group irq enable/disable utilities together
    * cache irq enable register
    * now disable any old alarm irq before setting alarm
 - Comment updates
    * fix up my copyright attribution (old omap1 code)
    * more correctly describe the rtc mask/set ops
    * have a single place describe the register vs tm_* differences
 - Other:
    * don't support "current" dates in the 20th century
    * switch over to bcd2bin()/bin2bcd()
    * prefer dev_err() and better messages to printk(KERN_ERR...)
    * correct some KERN_WARNING messages (should have been pr_err)
    * whitespace bugs
    * misc

The bugs fixed here are removing "periodic" IRQ support, and
some of the messaging.  Update IRQs still misbehave (two per
second, not one!), and the alarm isn't wake-enabled.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

As pointed out by Russell King.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The commit commit 4c563f76 ("[XFRM]:
Speed up xfrm_policy and xfrm_state walking") inadvertently removed
larval states and socket policies from netlink dumps.  This patch
restores them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>