- 22 Sep, 2008 10 commits
-
-
Clemens Ladisch authored
Add functions to allow model drivers to communicate with external chips by doing I/O with the not-used-for-MIDI UART. Signed-off-by:Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
To enable the MIDI port, model drivers must now set flags in device_config, not only in misc_flags. This allows model drivers to enable the UART without creating an ALSA MIDI device. Signed-off-by: -
Clemens Ladisch authored
Rename the pcm_dev_cfg field to device_config because there will be additional flags that do not describe PCM devices. Signed-off-by: -
Clemens Ladisch authored
Factor out the common code of the mixer callbacks that handle controls that just switch a single GPIO bit. Signed-off-by: -
Clemens Ladisch authored
The Xonar D2X and DX are very similar to the D2 and D1, respectively, so we can handle the differences dynamically instead of using a separate model structure for each one. Signed-off-by: -
Clemens Ladisch authored
Handle the differences between the X-Meridian and the other models in the probe callback instead of using a second model structure. Signed-off-by: -
Clemens Ladisch authored
Introduce symbols that indicate the two models handled by the snd-oxygen driver, instead of using a magic number. Signed-off-by: -
Clemens Ladisch authored
Add a probe callback to the model structure so that model-specific drivers can refine their model detection before the card is initialized. Signed-off-by: -
Clemens Ladisch authored
Put a copy of the model structure into the chip structure so that model- specific drivers can modify it depending on a particular device instance. Signed-off-by: -
Clemens Ladisch authored
When setting the SPDIF channel status sample rate field, use the recently defined symbols instead of magic numbers. Signed-off-by:
-
- 09 Sep, 2008 30 commits
-
-
Jaroslav Kysela authored
Signed-off-by:Jaroslav Kysela <perex@perex.cz>
-
Harald Welte authored
The VT1702 and VT1708S have a second S/PDIF output which is used to connect to a HDMI transmitter. This patch adds support for it. Signed-off-by:
Harald Welte <HaraldWelte@viatech.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Harald Welte authored
This mode allows an output stream to have two substreams, one for the speakers and one for the headphone. Each of the substreams has independent PCM data and uses a different DAC. Signed-off-by:
-
Harald Welte authored
Signed-off-by:
-
Harald Welte authored
The VT1702 and VT1708S codecs are new HDA codecs by VIA. This patch adds support for them to the patch_via.c file for HDA Signed-off-by:
-
Harald Welte authored
In the current driver, there is a consistent mistake between the SURROUND and the SIDE channels. This patch fixes it. Signed-off-by:
-
Harald Welte authored
Signed-off-by:
-
Harald Welte authored
* add extra parenthesis to make code more readable * use kzalloc() for alloc+zero rather than kcalloc() * ensure that AUTO_SEQ_* starts at 0 Signed-off-by:
-
Uwe Kleine-König authored
Don't use __init but __devinit to define probe function. A pointer to sa11xx_uda1341_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following probably oopses: echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind Signed-off-by:
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Brian Avery <b.avery@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Matthew Ranostay authored
Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match the coding style. Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Added slave_dig_outs entries for several IDT codecs that have multiple SPDIF outs, and enabled these SPDIF outs in several pin configs. Signed-off-by:
-
Mark Brown authored
Muting the DAC masks artefacts introduced as the digital stream shuts down, for example when the input stops being clocked. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
Hopefully this will make merges a little bit easier. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Matthew Ranostay authored
Added support for playing a stream on multiple digital outs. This is done by defining codec->slave_dig_outs as array of hda_nid_t with a null-terminated entry to set the slave SPDIF outs, in which the slave outs have cloned settings of the master out (e.g. dig_out_nid). Signed-off-by:
-
Krzysztof Helt authored
The __exit cleanup_oss_soundcore() is called from the __init init_soundcore(). This causes section mismatch and breaks kernel's linking on sparc64. Remove the __exit attribute from the cleanup_oss_soundcore(). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Takashi Iwai authored
The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock for protection of card->ctl_files entries, instead of card->controls_rwsem. Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
before: total: 113 errors, 169 warnings, 2786 lines checked total: 26 errors, 24 warnings, 504 lines checked after: total: 14 errors, 163 warnings, 2799 lines checked total: 0 errors, 24 warnings, 504 lines checked Compile tested only. Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
before: total: 96 errors, 66 warnings, 2612 lines checked after: total: 11 errors, 64 warnings, 2624 lines checked Compile tested only. Signed-off-by:
-
Vedran Miletic authored
Inspired by Alexander Beregalov's patches for wtm and aureon.c, I decided to run checkpatch on some more files. After some work checkpatch.pl-0.23 --no-tree --file --strict <file> reports 0 errors, 0 warnings, 0 checks, n lines checked for: phase.c phase.h juli.c (1 check about unused code, maybe we should comment it) juli.h (no changes necessary) In other files I have just fixed // comments and long lines along the way (but not all of them), more coming up. Signed-off-by:
Vedran Miletic <rivanvx@gmail.com> Signed-off-by:
-
Matthew Ranostay authored
Removed unneeded hp_nid references for 92hd73xx codec family. Signed-off-by:
-
Matthew Ranostay authored
Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs. Signed-off-by:
-
Alexander Beregalov authored
before: total: 2 errors, 0 warnings, 20 lines checked total: 49 errors, 2 warnings, 518 lines checked after: total: 0 errors, 0 warnings, 20 lines checked total: 0 errors, 0 warnings, 518 lines checked Compile tested, size and code are equal. Signed-off-by:
-
Alexander Beregalov authored
before: total: 304 errors, 137 warnings, 2259 lines checked after: total: 0 errors, 121 warnings, 2284 lines checked Compile tested, size is different because of include was changed, but without that change md5sum is different because of cmp cx,dx/cmp dx,cx swap and __LINE__ was changed in printk function. Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
[Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
