- 11 Dec, 2009 40 commits
-
-
Michal Nazarewicz authored
If g_ether and g_multi are both built CONFIG_USB_ETH_RNDIS symbol may be redefined in the later and, whats even worse, g_ether's settings may affect g_multi's. This adds a USB_ETH_RNDIS symbol defined at the beginning of ether.c and multi.c according toproper KConfig settings. Signed-off-by:
Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by:Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sarah Sharp authored
Refactor out the code to find alternate interface settings into usb_find_alt_setting(). Print a debugging message and return null if the alt setting is not found. While we're at it, correct a bug in the refactored code. The interfaces in the configuration's interface cache are not necessarily in numerical order, so we can't just use the interface number as an array index. Loop through the interface caches, looking for the correct interface. Signed-off-by:
-
Sarah Sharp authored
The xHCI driver issues a Configure Endpoint command for two reasons: - a new configuration or alternate interface setting is selected - a quirky Fresco Logic prototype requires the command after a Reset Endpoint command. The xHCI driver only waits on the command in the first case. When a configure endpoint command completes, the driver needs to know why the command was generated. When the driver only supported selecting an initial configuration, the check was simple. Unfortunately that check doesn't work now that the driver supports alternate interfaces. If an endpoint must be dropped (because it's not in the new alternate setting) and no new endpoints are added, the math involving xhci_last_valid_endpoint() will assign -1 to an unsigned integer and cause an out-of-bounds array access. Move the check for the quirky hardware sooner and avoid the bad array access. Signed-off-by:
-
Sarah Sharp authored
When a driver wants to switch to a different alternate setting for an interface, the USB core will (soon) check whether there is enough bandwidth. Once the new alternate setting is installed in the xHCI hardware, the USB core will send a USB_REQ_SET_INTERFACE control message. That can fail in various ways, and the USB core needs to be able to reinstate the old alternate setting. With the old code, reinstating the old alt setting could fail if the there's not enough memory to allocate new endpoint rings. Keep around a cache of (at most 31) endpoint rings for this case. When we successfully switch the xHCI hardware to the new alt setting, the old alt setting's rings will be stored in the cache. Therefore we'll always have enough rings to satisfy a conversion back to a previous device setting. Signed-off-by:
-
Sarah Sharp authored
Make the USB Test & Measurement driver use usb_clear_halt() instead of usb_control_msg() to clear a stalled endpoint. This will allow devices to be tested under an xHCI host controller. The endpoint stall will not be cleared in the internal xHCI hardware state unless usb_clear_halt() is used. Signed-off-by:
-
Sarah Sharp authored
Add the xHCI driver files to its MAINTAINERS entry so that I'm Cc'd on cleanup patches. Update the email address to one I actually use for sending patches and responding to Linux mailing list emails. Signed-off-by:
-
Julia Lawall authored
Error handling code following a kzalloc should free the allocated data. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Error handling code following a kzalloc should free the allocated data. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
-
CHENG Renquan authored
Accroding commit 0994375e, which is adding remove_id sysfs attr for pci drivers, for management tools dynamically bind/unbind a pci/usb devices to a specified drivers; with this patch, the management tools can be simplied. And the original code didn't handle the failure of usb_create_newid_file, fixed in this patch. Signed-off-by:
CHENG Renquan <rqcheng@smu.edu.sg> Signed-off-by:
-
Randy Dunlap authored
USB_G_MULTI uses block and net interface functions, so make it depend on both of those. Otherwise there are lots of build errors. Fix USB_G_MULTI config help text typos and copy/paste error. Signed-off-by:
-
zhao.ming9@zte.com.cn authored
This patch adds ZTE modem devices. Signed-off-by:
Ming Zhao <zhao.ming9@zte.com.cn> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Vrabel authored
Reported-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
David Vrabel authored
Don't leak an urb in wusb_dev_alloc() if the following kmalloc() failed. Reported-by:
-
David Vrabel authored
When building qTDs (sTDs) from a scatter-gather list, the length of the qTD must be a multiple of wMaxPacketSize if the transfer continues into another qTD. This also fixes a link failure on configurations for 32 bit processors with 64 bit dma_addr_t (e.g., CONFIG_HIGHMEM_64G). Signed-off-by:
-
Alan Stern authored
This patch (as1312) fixes a minor bug in usb-storage. The fill_inquiry() routine neglects to pre-load the inquiry data buffer with spaces. As a result, if the vendor name is shorter than 8 characters or the product name is shorter than 16, the remainder will be filled with garbage. The patch also removes some unnecessary calls to strlen(). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1311) fixes a problem in usb-storage: Some devices are pretty broken when it comes to reporting sense data. The information they send back indicates that they have more than 18 bytes of sense data available, but when the system asks for more than 18 they fail or hang. The symptom is that probing fails with multiple resets. The patch adds a new BAD_SENSE flag to indicate that usb-storage should never ask for more than 18 bytes of sense data. The flag can be set in an unusual_devs entry or via the "quirks=" module parameter, and it is set automatically whenever a REQUEST SENSE command for more than 18 bytes fails or times out. An unusual_devs entry is added for the Agfa photo frame, which uses a Prolific chip having this bug. Signed-off-by:
Daniel Kukula <daniel.kuku@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1303) revises the USB Power Management infrastructure to make it compatible with the new driver-model Runtime PM framework: Drivers are no longer allowed to access intf->pm_usage_cnt directly; the PM framework manages its own usage counters. usb_autopm_set_interface() is eliminated, because it directly sets intf->pm_usage_cnt. usb_autopm_enable() and usb_autopm_disable() are eliminated, because they call usb_autopm_set_interface(). usb_autopm_get_interface_no_resume() and usb_autopm_put_interface_no_suspend() are added. They correspond to pm_runtime_get_noresume() and pm_runtime_put_noidle() in the PM framework. The power/level attribute no longer accepts "suspend", only "on" and "auto". The PM framework doesn't allow devices to be forced into a suspended mode. The hub driver contains the only code that violates the new guidelines. It is updated to use the new interface routines instead. Signed-off-by:
-
Greg Kroah-Hartman authored
This is not exported from the usb core, yet we rely on it to create paths to interfaces for this device in sysfs. Export it to make userspace tools have an easier time to figure things out. Signed-off-by: -
Aguilar Pena, Leed authored
For TWL family of power management ICs, USB charging works only when USB regulators are in enabled state: 3v1, 1v5, 1v8 On a USB cable attach, twl4030_phy_resume(twl) function enables the regulators. Enable USB charging, only after all regulators are enabled. Its observed that enabling USB charging before regulators are enabled, causes USB charging to fail. Tested on: Zoom2: omap3430: ES3.1 + TWL5030 Needs T2-MADC and T2-BCI drivers which are still not upstreamed. Signed-off-by:
Moiz Sonasath <m-sonasath@ti.com> Signed-off-by:
Leed Aguilar <leed.aguilar@ti.com> Acked-by:
Vikram Pandita <vikram.pandita@ti.com> Acked-by:
Anand Gadiyar <gadiyar@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Acked-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Andre Herms authored
usb_bulk_msg() transfers only bytes up to the maximum packet size. It must be repeated by the usbtmc driver until all bytes of a TMC message are transfered. Without this patch, ETIMEDOUT is reported when writing TMC messages larger than the maximum USB bulk size and the transfer remains incomplete. The user will notice that the device hangs and must be reset by either closing the application or pulling the plug. Signed-off-by:
Andre Herms <andre.herms@tec-venture.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
Sergei Shtylyov authored
Remove the pointless 'do () while (0)' loop from musb_g_tx() -- it makes this function symmetric to musb_g_rx()... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Sergei Shtylyov authored
Stop playing with musb->lock and abusing musb_gadget_set_halt() in the code clearing the endpoint halt feature -- instead, manipulate the registers directly. While at it, get rid uf unneeded line breaks and over-indentation in the code setting the endpoint halt feature. Signed-off-by:
-
Sergei Shtylyov authored
Implement the driver's set_wedge() method by adding the 'wedged' flag to the 'struct musb_ep'. Signed-off-by:
-
Sergei Shtylyov authored
Commit a5073b52 (musb_gadget: fix unhandled endpoint 0 IRQs) somehow missed its key change: "The gadget EP0 code routinely ignores an interrupt at end of the data phase because of musb_g_ep0_giveback() resetting the state machine to "idle, waiting for SETUP" phase prematurely." So, the majority of the cases of unhandled IRQs is still unfixed... Signed-off-by:
-
Anand Gadiyar authored
MUSB: save hardware revision at init This can be used later to flag workarounds for issues affecting particular revisions. Saving this at init avoids having to read the HWVERS register multiple times in code. While at it, use macros to extract the version information instead of using hardcoded values. Signed-off-by:
-
Mike Frysinger authored
The debug code in the DMA ISR uses a %d for a size_t when it should be using %zu. Otherwise gcc whines with: drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq': drivers/usb/musb/musbhsdma.c:288: warning: format '%d' expects type 'int', but argument 7 has type 'size_t' Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Cliff Cai authored
Otherwise we get the link failure: drivers/built-in.o: In function 'musb_platform_init': drivers/usb/musb/blackfin.c:300: undefined reference to 'usb_nop_xceiv_register' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
-
Sonic Zhang authored
Since we can't work around anomaly 05000380, throw a build error up and instruct the user to use a different mode. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Cliff Cai authored
If we clear the interrupt pending bits at the end, we sometimes return too fast and have the same interrupt assert itself. There is no way in a Blackfin system to force a sync of this state, so the hardware manual instructs people to clear interrupt flags early in their ISR. Signed-off-by:
-
Bryan Wu authored
Update function definition to match latest MUSB framework. Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Sonic Zhang authored
Only allow USE_MODE1 when the Blackfin part is not affected by anomaly 05000456 (USB Receive Interrupt Is Not Generated in DMA Mode 1) since we can't support the mode in that case. Signed-off-by:
-
Sonic Zhang authored
Add some helpful notes about how the driver works around different anomalies that exist in the on-chip host controller. Signed-off-by:
-
Sonic Zhang authored
Do not allow MUSB driver to be selected on derivatives that don't have the MUSB controller on them. Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Bryan Wu authored
The Blackfin version of musb_read_target_reg_base() returns a u16 when the common code expects a (void __iomem *), so update the Blackfin function to return the right value. This fixes the compile warning: drivers/usb/musb/musb_core.c: In function 'musb_core_init': drivers/usb/musb/musb_core.c:1448: warning: assignment makes pointer from integer without a cast Signed-off-by:
-
Mike Frysinger authored
Otherwise gcc will whine about epnum/dma_reg being unused when building for BF54x parts. Signed-off-by:
-
Sarah Sharp authored
The xHCI 0.95 and 0.96 specification defines several transfer buffer request completion codes that indicate a USB transaction error occurred. When a stall, babble, transaction, or split transaction error completion code is set, the xHCI has halted that endpoint ring. Software must issue a Reset Endpoint command and a Set Transfer Ring Dequeue Pointer command to clean up the halted ring. The USB device driver is supposed to call into usb_reset_endpoint() when an endpoint stalls. That calls into the xHCI driver to issue the proper commands. However, drivers don't call that function for the other errors that cause the xHC to halt the endpoint ring. If a babble, transaction, or split transaction error occurs, check if the endpoint context reports a halted condition, and clean up the endpoint ring if it does. Signed-off-by:
-
Sarah Sharp authored
An xHCI host controller manufacturer can choose to implement several vendor-specific informational completion codes. These are all to be treated like a successful transfer completion. Signed-off-by:
-
Sarah Sharp authored
When the xHCI hardware says a transfer completed with a split transaction error, set the URB status to -EPROTO. Signed-off-by:
-
