- 23 Jun, 2006 40 commits
-
-
Miklos Szeredi authored
posix_lock_file() always allocates new locks in advance, even if it's easy to determine that no allocations will be needed. Optimize these cases: - FL_ACCESS flag is set - Unlocking the whole range Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Miklos Szeredi authored
posix_lock_file() was too cautious, failing operations on OOM, even if they didn't actually require an allocation. This has the disadvantage, that a failing unlock on process exit could lead to a memory leak. There are two possibilites for this: - filesystem implements .lock() and calls back to posix_lock_file(). On cleanup of files_struct locks_remove_posix() is called which should remove all locks belonging to files_struct. However if filesystem calls posix_lock_file() which fails, then those locks will never be freed. - if a file is closed while a lock is blocked, then after acquiring fcntl_setlk() will undo the lock. But this unlock itself might fail on OOM, again possibly leaking the lock. The solution is to move the checking of the allocations until after it is sure that they will be needed. This will solve the above problem since unlock will always succeed unless it splits an existing region. Signed-off-by:
-
Pekka Enberg authored
Add read_mapping_page() which is used for callers that pass mapping->a_ops->readpage as the filler for read_cache_page. This removes some duplication from filesystem code. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Jeff Moyer authored
Create two files in /sys/kernel, kexec_loaded and kexec_crash_loaded. Each file contains a simple boolean value indicating whether the relevant kernel has been loaded into memory. The motivation for this is geared around support. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Michael Holzheu authored
On zSeries machines there exists an interface which allows the operating system to retrieve LPAR hypervisor accounting data. For example, it is possible to get usage data for physical and virtual cpus. In order to provide this information to user space programs, I implemented a new virtual Linux file system named 's390_hypfs' using the Linux 2.6 libfs framework. The name 's390_hypfs' stands for 'S390 Hypervisor Filesystem'. All the accounting information is put into different virtual files which can be accessed from user space. All data is represented as ASCII strings. When the file system is mounted the accounting information is retrieved and a file system tree is created with the attribute files containing the cpu information. The content of the files remains unchanged until a new update is made. An update can be triggered from user space through writing 'something' into a special purpose update file. We create the following directory structure: <mount-point>/ update cpus/ <cpu-id> type mgmtime <cpu-id> ... hyp/ type systems/ <lpar-name> cpus/ <cpu-id> type mgmtime cputime onlinetime <cpu-id> ... <lpar-name> cpus/ ... - update: File to trigger update - cpus/: Directory for all physical cpus - cpus/<cpu-id>/: Directory for one physical cpu. - cpus/<cpu-id>/type: Type name of physical zSeries cpu. - cpus/<cpu-id>/mgmtime: Physical-LPAR-management time in microseconds. - hyp/: Directory for hypervisor information - hyp/type: Typ of hypervisor (currently only 'LPAR Hypervisor') - systems/: Directory for all LPARs - systems/<lpar-name>/: Directory for one LPAR. - systems/<lpar-name>/cpus/<cpu-id>/: Directory for the virtual cpus - systems/<lpar-name>/cpus/<cpu-id>/type: Typ of cpu. - systems/<lpar-name>/cpus/<cpu-id>/mgmtime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the hypervisor and was not provided to the LPAR (LPAR overhead). - systems/<lpar-name>/cpus/<cpu-id>/cputime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the LPAR. - systems/<lpar-name>/cpus/<cpu-id>/onlinetime: Accumulated number of microseconds during which the logical CPU has been online. As mount point for the filesystem /sys/hypervisor/s390 is created. The update process is triggered when writing 'something' into the 'update' file at the top level hypfs directory. You can do this e.g. with 'echo 1 > update'. During the update the whole directory structure is deleted and built up again. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Oeser <ioe-lkml@rameria.de> Cc: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by:Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Jesper Juhl authored
verify_area() is still alive on xtensa in 2.6.17-rc3-git13 It would be nice to finally be rid of that function across the board. Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Al Viro authored
Cast is not an lvalue; =r constraint wants an lvalue and really couldn't care whether it's void * or other pointer type. Signed-off-by:
-
Jan Altenberg authored
Signed-off-by:
Jan Altenberg <tb10alj@tglx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by:
-
Roman Zippel authored
This uninlines a few large functions in uaccess.h and cleans up the rest. It includes a (hopefully temporary) workaround for the broken typeof of gcc-4.1. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
Some fixes and cleanups from the linux-mac68k repo. Fix mac_esp by clearing the VIA2 SCSI IRQ flag before the SCSI IRQ handler is invoked. Also fix a race condition caused by unmasking a nubus slot IRQ then setting the relevant nubus_active bit. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Roman Zippel authored
Adjust entry.S to the changed HARDIRQ_MASK, add a check to prevent it from silently breaking again. Signed-off-by:
-
Roman Zippel authored
MAX_NR_ZONES changed, so use correct defines now. Signed-off-by:
-
Roman Zippel authored
The wd33c93 needs a small delay before a new command can be started. Signed-off-by:
-
Roman Zippel authored
Dump the extra mapping in the amikbd interrupt handler, so old Amiga keymaps work again. Amigas need a special keymap anyway, standard keymaps are not usable and recreating all keymaps is simply not worth the trouble. Signed-off-by:
-
Roman Zippel authored
Pass unmodified stack argument to show_trace(). Signed-off-by:
-
Roman Zippel authored
Signed-off-by:
-
Roman Zippel authored
These definitions have long been superseded by asm-offsets.h Signed-off-by:
-
Roman Zippel authored
Remove long obsolete kernel syscalls, only execve is still used. Signed-off-by:
-
Roman Zippel authored
The atyfb_driver structure is only available if CONFIG_PCI is set. Signed-off-by:
-
Roman Zippel authored
ide_setup_ports does not completely initialize the hw_regs_t structure which can cause random failures, as the structure is often on the stack. None of the callers expect a partially initialized structure, i.e. none of them do any setup of their own before calling ide_setup_ports(). Signed-off-by:
-
Shaohua Li authored
Move do_suspend_lowlevel to correct segment. If it is in the same hugepage with ro data, mark_rodata_ro will make it unexecutable. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Pavel Machek authored
Update documentation a bit, add more machines to video.txt list. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Shaohua Li authored
flush_tlb_all uses on_each_cpu, which will disable/enable interrupt. In suspend/resume time, this will make interrupt wrongly enabled. Signed-off-by:
-
Rafael J. Wysocki authored
Make swsusp allocate only as much memory as needed to store the image data and metadata during resume. Without this patch swsusp additionally allocates many page frames that will conflict with the "original" locations of the image data and are considered as "unsafe", treating them as "eaten" pages (ie. allocated but unusable). The patch makes swsusp allocate as many pages as it'll need to store the data read from the image in one shot, creating a list of allocated "safe" pages, and use the observation that all pages allocated by it are marked with the PG_nosave and PG_nosave_free flags set. Namely, when it's about to load an image page, swsusp can check whether the page frame corresponding to the "original" location of this page has been allocated (ie. if the page frame has the PG_nosave and PG_nosave_free flags set) and if so, it can load the page directly into this page frame. Otherwise it uses an allocated "safe" page from the list to store the data that will be copied to their "original" location later on. This allows us to save many page copyings and page allocations during resume and in the future it may allow us to load images greater than 50% of the normal zone. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
-
Adrian Bunk authored
- make needlessly global functions static - make dummy functions static inline Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
swsusp allocates memory from the normal zone, so it cannot use lowmem reserve pages from the lower zones. Therefore it should not count these pages as available to it. Signed-off-by:
-
Shaohua Li authored
Pages (Reserved/ACPI NVS/ACPI Data) below end_pfn will be saved/restored by S4 currently. We should mark 'Reserved' pages not saveable. Pages (Reserved/ACPI NVS/ACPI Data) above end_pfn will not be saved/restored by S4 currently. We should save the 'ACPI NVS/ACPI Data' pages. Signed-off-by:
-
Shaohua Li authored
Pages (Reserved/ACPI NVS/ACPI Data) below max_low_pfn will be saved/restored by S4 currently. We should mark 'Reserved' pages not saveable. Pages (Reserved/ACPI NVS/ACPI Data) above max_low_pfn will not be saved/restored by S4 currently. We should save the 'ACPI NVS/ACPI Data' pages. Signed-off-by:
-
Shaohua Li authored
1. Add architecture specific pages save/restore support. Next two patches will use this to save/restore 'ACPI NVS' pages. 2. Allow reserved pages 'nosave'. This could avoid save/restore BIOS reserved pages. Signed-off-by:
-
Mathieu Chouquet-Stringer authored
WARNING: vmlinux: 'enable_irq' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'disable_irq' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'disable_irq_nosync' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'probe_irq_mask' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'sys_open' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'sys_read' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strstr' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'memscan' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'memcmp' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strnlen' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strncmp' exported twice. Previous export was in vmlinux WARNING: vmlinux: 'strcmp' exported twice. Previous export was in vmlinux Signed-off-by:
Mathieu Chouquet-Stringer <mchouque@free.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
Kirill Smelkov authored
compile fix: <asm-i386/alternative.h> needs <asm/types.h> for 'u8' -- just look at struct alt_instr. My module includes <asm/bitops.h> as the first header, and as of 2.6.17 this leads to compilation errors. Signed-off-by:
Kirill Smelkov <kirr@mns.spb.ru> Cc: <stable@kernel.org> Signed-off-by:
-
Michal Ludvig authored
New CPU flags for next generation of crypto engine as found in VIA C7 processors. Signed-off-by:
Michal Ludvig <michal@logix.cz> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Chuck Ebbert authored
Sometimes thread_info and task_struct get out-of-sync with each other. Printing task.thread_info in show_registers() can help spot this. And when task_struct is corrupt then task.comm can contain garbage, so only print as many characters as it can hold. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Roman Zippel authored
An immediate operand can't be the destination of the cmpl instruction, so exclude it. Signed-off-by:
-
Zachary Amsden authored
Never allow int3 traps from V8086 mode to enter the kprobes handler. Signed-off-by:
Zachary Amsden <zach@vmware.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Chuck Ebbert authored
We need to check for vm86 mode first before looking at selector privilege bits. Segment limit is always base + 64k and only the low 16 bits of EIP are significant in vm86 mode. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Andreas Mohr authored
Use proper defines instead of open-coded values. Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Andreas Mohr authored
constify structs and add one __initdata. Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
-
