- 27 Apr, 2009 20 commits
-
-
Christof Schmitt authored
Before dropping the reference count with zfcp_adapter_put, increase it with zfcp_adapter_get when issuing cfdc requests. Reviewed-by:
Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Martin Petermann authored
If this problem appears zfcp ports cannot be de-queued since it is checked for a zero refcount. The port reference counting is wrong for existing zfcp ports when e.g. an adapter gets on-line again. During port scanning the reference counting for existing ports should not be changed. Signed-off-by:
Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by:
-
Martin Petermann authored
The current sbal counting can be wrong if a fsf request is waiting for free sbals and at the same time qdio request queue is shutdown and re-opened. Revering a previous patch fixes this issue. Signed-off-by:
-
Christof Schmitt authored
When the abort handler cannot find a pending FSF request, the request completion could just be running. This means we cannot return SUCCESS, since this would lead to call to scsi_done after exiting the SCSI error handler which is not allowed. Reviewed-by:
-
Swen Schillig authored
A remote port remains in error state even if we receive a RSCN stating that the connection is re-established. The port recovery is not started due to a flag which is not reset. The solution is to clear the flag in question before we trigger a ERP. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Error codes specific to the control file requests are evaluated by the actcli tool, so don't report -ENXIO for those. Generic problems are still checked for outside the command specific handler. Reviewed-by:
-
Martin Petermann authored
On some hardware it can take some time to add a unit. If some remove this unit during this process the remove will fail. Signed-off-by:
-
Swen Schillig authored
The remote port remains in error state even if the connection is re-established. A wrong precondition check was performed on the port status leading to a cancellation of the port reopen. Remove the pre-req check because it's not required and better handled within the ERP. Signed-off-by:
-
Swen Schillig authored
The ERP thread is performing a task before it is executing the corresponding down on the semaphore. The response handler of the just started exchange config should wait for the completion by performing a down on this semaphore. Since this semaphore is still positive from the ERP enqueue the handler won't wait and therefore the exchange config will always fail leaving the adapter in error. The problem can be solved by performing the down on the semaphore before starting an ERP task. This is the logically correct order. Only walk the ERP loop if there is a task to perform. Signed-off-by:
-
Swen Schillig authored
The nameserver port might be in state online when the adapter is offlined. On adapter reactivation the nameserver port is not re-opened due to the PORT_ONLINE status. This results in an unsuccessful recovery. In forcing the nameserver port status to offline on all adapter offline events this issue is prevented. Waiting for the reference count to drop to zero in zfcp_wka_port_offline is not required, so remove it. Signed-off-by:
-
Swen Schillig authored
When running the scsi_scan from the zfcp workqueue and the target device does not respond, the zfcp workqueue can block until the scsi_scan hits a timeout. Move the work to the scsi host workqueue, since this one is also used for the scan from the SCSI midlayer. Signed-off-by:
-
Christof Schmitt authored
Fix problem that zfcp_fsf_exchange_config_data_sync and zfcp_fsf_exchange_config_data_sync could try to call zfcp_fsf_req_free with a NULL pointer. Reviewed-by:
-
Swen Schillig authored
Since we're setting the host port type now to FC_PORTTYPE_NPIV for adapters running in NPIV mode we should allow this port type for auto-port scanning as well. Signed-off-by:
-
Martin Petermann authored
Avoid referencing a fsf request after sending it in fcp_fsf_req_send, it might have already completed and deallocated. Signed-off-by:
-
Mike Christie authored
We cannot call blk_plug_device from scsi_target_queue_ready because the q lock is not held. And we do not need to call it from there because when we return 0, the scsi_request_fn not_ready handling will plug the queue for us if needed. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
James Smart authored
Update driver version to 8.3.1 Also update copyright end year for driver. Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
-
James Smart authored
8.3.1 Fixes/Changes : - Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC) - Remove a bad cast of MBslimaddr which loses the __iomem (sparse) - Make lpfc_debugfs_mask_disc_trc static (sparse) - Correct misspelled word BlockGuard in lpfc_logmsg.h comment - Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs(). - Increased HBQ buffers to support 40KB SSC sequences. - Added sysfs interface to update speed and topology parameter without link bounce. - Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs. - Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test - Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport - Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called. - Fixed "Nodelist not empty" message when unloading the driver after target reboot test - Added LP2105 HBA model description - Added code to print all 16 words of unrecognized ASYNC events - Fixed memory leak in vport create + delete loop - Added support for handling dual error bit from HBA - Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb - Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node - Take NULL termintator into account when calculating available buffer space Signed-off-by:
-
James Smart authored
Signed-off-by:
-
FUJITA Tomonori authored
blk_rq_unmap_user() returns EFAULT if a program passes an invalid address to kernel (the kernel fails to copy data to user space). sg needs to pass the returned value to user space instead of ignoring it. Before the block layer conversion, sg returns EFAULT properly. This restores the old behavior. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Peter Jones authored
So, what's happening here is that the drive is reporting a sense of 2/4/1 ("logical unit is becoming ready") from sr_test_unit_ready(), and then we ask for the media event notification before checking that result at all. The check_media_event_descriptor() call isn't getting a check condition, but it's also reporting that the tray is closed and that there's no media. In actuality it doesn't yet know if there's media or not, but there's no way to express that in the media event status field. My current thought is that if it told us the device isn't yet ready, we should return that immediately, since there's nothing that'll tell us any more data than that reliably: Signed-off-by:
-
- 26 Apr, 2009 11 commits
-
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
Tim Abbott <tabbott@mit.edu> Cc: David S. Miller <davem@davemloft.net> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by:
-
Tim Abbott authored
Signed-off-by:
-
Tim Abbott authored
This patch is preparation for replacing all uses of ".head.text" or ".text.head" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. Since some linker scripts do more complex things than referencing HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the actual name. I've defined HEAD_TEXT_SECTION in a new header, include/linux/section-names.h, so that this section name only needs to appear in one place. I anticipate creating similar macro structures for a number of other section names. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".text.foo". Signed-off-by:
-
- 24 Apr, 2009 9 commits
-
-
Rafael J. Wysocki authored
Commit c7510859 ("PM/Hibernate: Wait for SCSI devices scan to complete during resume") added a call to scsi_complete_async_scans() to software_resume(), so that it waited for the SCSI scanning to complete, but the call was added at a wrong place. Namely, it should have been added after wait_for_device_probe(), which is called only if the image partition hasn't been specified yet. Also, it's reasonable to check if the image partition is present and only wait for the device probing and SCSI scanning to complete if it is not the case. Additionally, since noresume is checked right at the beginning of software_resume() and the function returns immediately if it's set, it doesn't make sense to check it once again later. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
David Howells authored
RomFS should advance the destination buffer pointer when reading data from a blockdev source (the data may be split over multiple blocks, each requiring its own sb_read() call). Without this, all the data is copied to the beginning of the output buffer. Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
David Howells authored
romfs_lookup() should be using a routine akin to strcmp() on the backing store, rather than one akin to strncmp(). If it uses the latter, it's liable to match /bin/shutdown when looking up /bin/sh. Signed-off-by:
-
Fred Isaman authored
Currently, although find_last_bit is EXPORTed, it is statically linked with the kernel and is referenced only under CONFIG_SMP. When CONFIG_SMP is undefined and find_last_bit is referenced only by modules, linking fails with: ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined! Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Fred Isaman <iisaman@citi.umich.edu> Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
-
Marc Dionne authored
Adjust the CacheFiles documentation to use the correct names of the credential pointers in task_struct. The documentation was using names from the old versions of the credentials patches. Signed-off-by:
Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by:
-
Christian Borntraeger authored
The virtio-rng drivers checks for spurious callbacks. Since callbacks can be implemented via shared interrupts (e.g. PCI) this could lead to guest kernel oopses with lots of virtio devices. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by:
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: add parameter to microblaze_read() microblaze: Use CFLAGS_KERNEL instead of CFLAGS microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too microblaze: Do not check use_dcache microblaze: Do not use PVR configuration for broken MB version microblaze: Fix USR1/2 pvr printing message microblaze: iowrite upon timeout microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig microblaze: Remove redundant variable microblaze: Move start_thread to process.c microblaze: Add missing preadv and pwritev syscalls microblaze: Add missing declaration for die and _exception func microblaze: Remove sparse error in traps.c microblaze: Move task_pt_regs up microblaze: Rename kernel_mode to pt_mode in pt_regs microblaze: Remove uncache shadow condition microblaze: Remove while(1) loop from show_regs function microblaze: Remove unneded per cpu SYSCALL_SAVE variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) ACPI, i915: Register ACPI video even when not modesetting Revert "ACPICA: delete check for AML access to port 0x81-83" I/O port protection: update for windows compatibility. sony-laptop: always try to unblock rfkill on load sony-laptop: fix bogus error message display on resume ACPI: EC: Fix ACPI EC resume non-query interrupt message sony-laptop: SNC input event 38 fix sony-laptop: SNC 127 Initialization Fix sony-laptop: Duplicate SNC 127 Event Fix ACPI: prevent processor.max_cstate=0 boot crash ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M ACPI: delete obsolete "bus master activity" proc field ACPI: idle: mark_tsc_unstable() at init-time, not run-time ACPI: add /sys/firmware/acpi/interrupts/sci_not counter ACPI video: fix an error when the brightness levels on AC and on Battery are same acpi-cpufreq: Do not let get_measured perf depend on internal variable acpi-cpufreq: style-only: add parens to math expression acpi-cpufreq: Cleanup: Use printk_once x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf thinkpad-acpi: bump up version to 0.23 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: update the default config for the ColdFire 5407C3 board m68knommu: update the default config for the ColdFire 5307C3 board m68knommu: update the default config for the ColdFire 5257EVB board m68knommu: update the default config for the ColdFire 5249EVB. m68knommu: add a defconfig for the ColdFire M5272C3 board m68knommu: update the defconfig for the ColdFire 5208evb board m68knommu: fix DMA support for ColdFire m68knommu: remove unused kernel stats offsets m68knommu: fix missing .data.cacheline_aligned section m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.
-
