- 18 Oct, 2009 4 commits
-
-
Roel Kluin authored
If left unsigned the hp_sdc_rtc_read_i8042timer() return value will not be checked correctly. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Herton Ronaldo Krzesinski authored
Some machines share same key list for volume up/down release key quirks, use only one key list. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Reported-and-tested-by: Harald Dunkel <harald.dunkel@t-online.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
On this model, when KBD is in active multiplexing mode, acknowledgements to reset and get ID commands issued on KBD port sometimes are delivered to AUX3 port (touchpad) which messes up device detection. Legacy KBC mode works fine and since there are no external PS/2 ports on this laptop and no support for docking station we can safely disable active MUX mode. Tested-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 14 Oct, 2009 2 commits
-
-
Dmitry Torokhov authored
input_devices_seq_start() uses mutex_lock_interruptible() to acquire the input_mutex, but doesn't properly handle the situation when the call fails (for example due to interrupt). Instead of returning NULL (which indicates that there is no more data) we should return ERR_PTR()-encoded error. We also need explicit flag indicating whether input_mutex was acquired since input_devices_seq_stop() is called whether input_devices_seq_start() was successful or not. The same applies to input_handlers_seq_start(). Reported-by: iceberg <strakh@ispras.ru> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
We need to postpone restoring LED state and typematic settings until keyboard is finished reconnecting upon resume. Normally driver core and PM infrastructure takes care of proper ordering and dependencies, but or case actual reconnect is done asynchronously from kseriod. So while driver core thinks that keyboard was resumed and it is time to let input core run it's resume handlers in reality keyboard is not ready yet. The solution is to keep rescheduling work that adjusts LED and rate settings until keyboard is fully enabled. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 13 Oct, 2009 3 commits
-
-
Dmitry Torokhov authored
Fix breakage caused by commit 9605fb48 While the input core indeed takes care of restoring led state and typematic settings upon resume the driver still need to initialize them properly when registering a new device Reported-and-tested-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
This small snippet escaped last round of int -> bool conversion. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Apparently some of Toshiba Protege M300 identify themselves as "Portable PC" in DMI so we need to add that to the DMI table as well. We need DMI data so we can automatically lower Synaptics reporting rate from 80 to 40 pps to avoid over-taxing their keyboard controllers. Tested-by: Rod Davison <roddavison@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 09 Oct, 2009 1 commit
-
-
Dmitry Torokhov authored
Sometimes it is not clear why IRQ delivery test failed so let's add some debug printks so we know the exact reason. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 06 Oct, 2009 7 commits
-
-
Dmitry Torokhov authored
libps2 can not be built in if i8042 is a module, all other combinations are allowed. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Amit Kucheria authored
The original driver was written with the KEY() macro defined as (col, row) instead of (row, col) as defined by the matrix keypad infrastructure. So the keymap was defined accordingly. Since the driver that was merged upstream uses the matrix keypad infrastructure, modify the keymap accordingly. While we are at it, fix the comments in twl4030.h and define PERSISTENT_KEY as (r,c) instead of (c, r) Tested on a RX51 (N900) device. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Michael Hennerich authored
If the sub-probe functions fail, we need to pass up the error code to the higher levels from the probe function. We currently always return 0 even if there was an error so higher levels don't report problems. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Thomas Gruber authored
Add BigBen Interactive XBOX 360 Controller (146b:0601) to xpad driver. Signed-off-by: Thomas Gruber <kerneldev@tuxpower.org> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
H Hartley Sweeten authored
When the rotart_encoder driver is used to report relative axis information the "steps" in the platform data could be missing since it's not relevant. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Uwe Kleine-König authored
The function bbc_remove and grover_remove are used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Sebastian Frei authored
Signed-off-by: Sebastian Frei <dr.nop@gmx.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 23 Sep, 2009 1 commit
-
-
Raphael Derosso Pereira authored
This version only supports individual cells (no slide support yet). The code has been tested on proprietary development ARM board, but should work fine on other machines. Signed-off-by: Raphael Derosso Pereira <raphaelpereira@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 22 Sep, 2009 2 commits
-
-
Dmitry Torokhov authored
Convert max7359 driver to use IRQ threading instead of using workqueue. Tested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Kim Kyuwon authored
The Maxim MAX7359 is a I2C interfaced key switch controller which provides microprocessors with management of up to 64 key switches. This patch adds support for the MAX7359 key switch controller. Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Reviewed-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 18 Sep, 2009 9 commits
-
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Joonyoung Shim authored
The MELPAS MCS-5000 is the touchscreen controller. The overview of this controller can see at the following website: http://www.melfas.com/product/product01.asp?k_r=eng_ This driver is tested on s3c6410 NCP board and supports only the i2c interface. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Javier Herrero authored
Driver for the keyboard hardware documented here: http://www.opencores.org/project,keyboardcontrollerSigned-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The genirq already provides default hard IRQ handler for threaded IRQs, no need to implement our own here. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
cancel_delayed_work() may spin and therefore should not be used in interrupt contexts. Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Michael Hennerich authored
The AD7889 is a new part but 100% software compatible with the AD7879, so add it to the id_table and help text. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Now that input core takes care of restoring state of input devices upon resume we don't need to do anything special here. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Automatically turn off leds and sound effects as part of suspend process and restore led state, sounds and repeat rate at resume. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The serio ports on i8042 are not completely isolated; while we provide enough locking to ensure proper serialization when accessing control and data registers AUX and KBD ports can still have an effect on each other on PS/2 protocol level. The most prominent effect is that issuing a command for the device connected to one port may cause abort of the command currently executing by the device connected to another port. Since i8042 nor serio subsystem are not aware of the details of the PS/2 protocol (length of the commands and their replies and so on) the locking should be done on libps2 level by adding special handling when we see that we are dealing with serio port on i8042. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 15 Sep, 2009 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: ide: fixup for fujitsu disk ide: convert to ->proc_fops at91_ide: remove headers specific for at91sam9263 IDE: palm_bk3710: convert clock usage after clkdev conversion ide: fix races in handling of user-space SET XFER commands ide: allow ide_dev_read_id() to be called from the IRQ context ide: ide-taskfile.c fix style problems drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST ide-tape: fix handling of postponed rqs ide-tape: convert to ide_debug_log macro ide-tape: fix debug call ide: Fix annoying warning in ide_pio_bytes(). IDE: Save a call to PageHighMem()
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits) powerpc64: convert to dynamic percpu allocator sparc64: use embedding percpu first chunk allocator percpu: kill lpage first chunk allocator x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA percpu: update embedding first chunk allocator to handle sparse units percpu: use group information to allocate vmap areas sparsely vmalloc: implement pcpu_get_vm_areas() vmalloc: separate out insert_vmalloc_vm() percpu: add chunk->base_addr percpu: add pcpu_unit_offsets[] percpu: introduce pcpu_alloc_info and pcpu_group_info percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward percpu: add @align to pcpu_fc_alloc_fn_t percpu: make @dyn_size mandatory for pcpu_setup_first_chunk() percpu: drop @static_size from first chunk allocators percpu: generalize first chunk allocator selection percpu: build first chunk allocators selectively percpu: rename 4k first chunk allocator to page percpu: improve boot messages percpu: fix pcpu_reclaim() locking ... Fix trivial conflict as by Tejun Heo in kernel/sched.c
-
Nicolas Pitre authored
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Fix buffer overflow in perf_copy_attr()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (213 commits) V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2 V4L/DVB (12713): em28xx: Cleanups at ir_i2c handler V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a persistent object V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent object V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111 V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 sensors. V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968 V4L/DVB (12703): gspca - sn9c20x: Reduces size of object V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensors V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e. V4L/DVB (12695): gspca - vc032x: Do the LED work with the sensor hv7131r. V4L/DVB (12694): gspca - vc032x: Change the start exchanges of the sensor hv7131r. V4L/DVB (12693): gspca - sunplus: The brightness is signed. V4L/DVB (12692): gspca - sunplus: Optimize code. V4L/DVB (12691): gspca - sonixj: Don't use mdelay(). V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added. V4L/DVB (12686): dvb-core: check supported QAM modulations V4L/DVB (12685): dvb-core: check fe->ops.set_frontend return value ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pat: Fix cacheflush address in change_page_attr_set_clr() mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set x86: Fix earlyprintk=dbgp for machines without NX x86, pat: Sanity check remap_pfn_range for RAM region x86, pat: Lookup the protection from memtype list on vm_insert_pfn() x86, pat: Add lookup_memtype to get the current memtype of a paddr x86, pat: Use page flags to track memtypes of RAM pages x86, pat: Generalize the use of page flag PG_uncached x86, pat: Add rbtree to do quick lookup in memtype tracking x86, pat: Add PAT reserve free to io_mapping* APIs x86, pat: New i/f for driver to request memtype for IO regions x86, pat: ioremap to follow same PAT restrictions as other PAT users x86, pat: Keep identity maps consistent with mmaps even when pat_disabled x86, mtrr: make mtrr_aps_delayed_init static bool x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled x86: Fix an incorrect argument of reserve_bootmem() x86: Fix system crash when loading with "reservetop" parameter
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, intel_txt: clean up the impact on generic code, unbreak non-x86 x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE x86, intel_txt: Fix typos in Kconfig help x86, intel_txt: Factor out the code for S3 setup x86, intel_txt: tboot.c needs <asm/fixmap.h> intel_txt: Force IOMMU on for Intel TXT launch x86, intel_txt: Intel TXT Sx shutdown support x86, intel_txt: Intel TXT reboot/halt shutdown support x86, intel_txt: Intel TXT boot support
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6Linus Torvalds authored
* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel: remove restore in resume agp: fix uninorth build intel-agp: Set dma mask for i915 agp: kill phys_to_gart() and gart_to_phys() intel-agp: fix sglist allocation to avoid vmalloc() intel-agp: Move repeated sglist free into separate function agp: Switch agp_{un,}map_page() to take struct page * argument agp: tidy up handling of scratch pages w.r.t. DMA API intel_agp: Use PCI DMA API correctly on chipsets new enough to have IOMMU agp: Add generic support for graphics dma remapping agp: Switch mask_memory() method to take address argument again, not page
-
Wu Zhangjin authored
This patch will fix the following problem on Yeeloong netbook with fujitsu disk. irq 14: nobody cared (try booting with the "irqpoll" option) Call Trace: [<ffffffff8020d438>] dump_stack+0x8/0x40 [<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4 [<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c [<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134 [<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0 [<ffffffff8020041c>] ret_from_irq+0x0/0x4 [<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0 [<ffffffff8026f794>] swsusp_free+0xb0/0x14c [<ffffffff8026ec08>] hibernate+0x198/0x218 [<ffffffff8026cfa8>] state_store+0x90/0x138 [<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194 [<ffffffff802c94fc>] vfs_write+0xb8/0x180 [<ffffffff802c96b8>] SyS_write+0x50/0x98 [<ffffffff80203fd8>] handle_sys+0x158/0x174 handlers: [<ffffffff80429670>] (ide_intr+0x0/0x300) Disabling IRQ #14 References: 1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of git://dev.lemote.com/linux_loongson.git 2. 8bc1e5aa (ide: respect quirk_drives[] list on all controllers) Signed-off-by: Yan Hua <yanh@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiao Guangrong authored
If we pass a big size data over perf_counter_open() syscall, the kernel will copy this data to a small buffer, it will cause kernel crash. This bug makes the kernel unsafe and non-root local user can trigger it. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org> LKML-Reference: <4AAF37D4.5010706@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-