Update the file patterns for the WUSB, UWB and WLP subsystems and add
netdev@vger as the list for the WLP subsystem.
Signed-off-by: David Vrabel <david.vrabel@csr.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_cmd64x: fix overclocking of UDMA0-2 modes
  Revert "pata_cmd64x: implement serialization as per notes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: Fix bnx2_netif_stop() merge error.
  gianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSC
  gianfar: Fix stats support
  gianfar: Fix a filer bug
  bnx2: fixing a timout error due not refreshing TX timers correctly
  can/at91: don't check platform_get_irq's return value against zero
  mISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completion
  bnx2: reset_task is crashing the kernel. Fixing it.
  ipv6: fix an oops when force unload ipv6 module
  TI DaVinci EMAC: Fix MDIO bus frequency configuration
  e100: Fix broken cbs accounting due to missing memset.
  broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk()
  e1000e: LED settings in EEPROM ignored on 82571 and 82572
  netxen: use module parameter correctly
  netns: fix net.ipv6.route.gc_min_interval_ms in netns
  Bluetooth: Prevent ill-timed autosuspend in USB driver
  Bluetooth: Fix L2CAP locking scheme regression
  Bluetooth: Ack L2CAP I-frames before retransmit missing packet
  Bluetooth: Fix unset of RemoteBusy flag for L2CAP
  Bluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid()

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix hotplug hang
  sched: Restore printk sanity

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (24 commits)
  ALSA: sbawe: fix memory detection
  ALSA: fix incorrect rounding direction in snd_interval_ratnum()
  ALSA: HDA: add powersaving hook for Realtek
  ALSA: HDA: remove useless mixers on Aspire 8930G
  ALSA: HDA: simplify Aspire 8930G verb array
  ALSA: hda: Set Front Mic to input vref 50% for Lenovo 3000 Y410
  ALSA: hda/realtek: Remove extra .capsrc_nids initialization for ALC889_INTEL
  ALSA: Use kzalloc for allocating only one thing
  ALSA: AACI: switch to per-pcm locking
  ALSA: AACI: add double-rate support
  ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params
  ALSA: AACI: cleanup aaci_pcm_hw_params
  ALSA: AACI: simplify codec rate information
  ALSA: aaci - Fix a typo
  ASoC: wm8974: fix a wrong bit definition
  sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer
  ALSA: hda - Fix quirk for Maxdata obook4-1
  ALSA: hda - Fix missing capsrc_nids for ALC88x
  ALSA: hda - Make use of beep device found in Dell Vostro 1015n
  ALSA: hda - Fixed internal mic initialization for Dell Vostro 1015
  ...

Memory amount is increased before a successful write-read
sequence is done. Thus, 512 kB of onboard memory is detected
on memoryless cards like SB32.

Move the increasing of memory counter after successful read
is done.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The direction of rounding is incorrect in the snd_interval_ratnum()
It was detected with following parameters (sb8 driver playing
8kHz stereo file):
 - num is always 1000000
 - requested frequency rate is from 7999 to 7999 (single frequency)

The first loop calculates div_down(num, freq->min) which is 125.
Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz.
The second loop calculates div_up(num, freq->max) which is 126
The frequency range's maximum value is 1000000 / 126 = 7936 Hz.
The range maximum is lower than the range minimum so the function
fails due to empty result range.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The current Realtek code makes no specific provision for turning stuff
off. The codec chip is placed into low-power mode generically, but this
doesn't turn off any external hardware connected to it, in particular
external amplifiers.

This patch creates a hook function that is called by the codec
suspend/resume functions. It ought to disable any external hardware in a
device-specific way. I've implemented a generic ALC889 function that
sets the EAPD pin properly, and used it for the Acer Aspire 8930G which
can benefit from this feature.

On my laptop, this results in ~0.5W extra savings.
Signed-off-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch removes some extra mixers that do nothing on the Acer Aspire
8930G.

The CD mixer is useless because the SATA DVD/Blu-Ray drive has no analog
audio output, and the Side mixer is useless because we max out at 6ch
anyway.
Signed-off-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch just simplifies the 8930G verb array a bit. Just use the
common ALC889 EAPD verb array to make things more consistent. The file
is already huge enough already.
Signed-off-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/479373

The OR has verified with hda-verb that the internal microphone needs
VREF50 set for audible capture.
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A typo in 12045a6e "nfsd: let "insecure" flag vary by
pseudoflavor" reversed the sense of the "insecure" flag.
Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The error was introduced while merging:

commit 4529819c
bnx2: reset_task is crashing the kernel. Fixing it.

Signed-off-by: Michael Chan <mchan@broadcom.com>k
Signed-off-by: David S. Miller <davem@davemloft.net>

The hot-unplug kstopmachine usage does a wakeup after
deactivating the cpu, hence we cannot use cpu_active()
here but must rely on the good olde online.
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <1261326987.4314.24.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

adev->dma_mode stores the transfer mode value not UDMA mode number
so the condition in cmd64x_set_dmamode() is always true and the higher
UDMA clock is always selected.  This can potentially result in data
corruption when UDMA33 device is used, when 40-wire cable is used or
when the error recovery code decides to lower the device speed down.

The issue was introduced in the commit 6a40da02 ("libata cmd64x: whack
into a shape that looks like the documentation") which goes back to
kernel 2.6.20.

Cc: stable@kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This reverts commit d4374439, because
it breaks the boot on several machines (mostly sparc64, at present).
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Revert the braindead pr_* crap. (Commit 663997d4 "sched: Use
pr_fmt() and pr_<level>()")

It's dumb and causes stupid "sched: " strings all over the place.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Galbraith <efault@gmx.de>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1261315437.4314.6.camel@laptop>
[ i dont mind the pr_*() patterns that much - but Peter dislikes them with a vengence. ]
[ - v2: remove spurious diffstat from changelog :-/ ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Convert BUG() to use unreachable()
  alpha: Add minimal support for software performance events
  alpha: Wire up missing/new syscalls

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: remove pointless NULL test
  pata_hpt3x2n: fix clock turnaround
  libata: fix reporting of drained bytes when clearing DRQ
  sata_mv: add power management support for the PCI controllers.
  sata_mv: store the board_idx into the host private data
  pata_octeon_cf: use resource_size(), to fix resource sizing bug
  libata: use the WRITE_SAME_16 define
  sata_mv: move the PCI bar description initialization code
  sata_mv: add power management support for the platform driver
  sata_mv: support clkdev framework
  sata_mv: increase PIO IORDY timeout

Fixed crazy mode-change in merge.

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf session: Make events_stats u64 to avoid overflow on 32-bit arches
  hw-breakpoints: Fix hardware breakpoints -> perf events dependency
  perf events: Dont report side-band events on each cpu for per-task-per-cpu events
  perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker
  perf events, x86/stacktrace: Make stack walking optional
  perf events: Remove unused perf_counter.h header file
  perf probe: Check new event name
  kprobe-tracer: Check new event/group name
  perf probe: Check whether debugfs path is correct
  perf probe: Fix libdwarf include path for Debian

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
  Makefile: Unexport LC_ALL instead of clearing it
  x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk
  x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
  x86: Don't use POSIX character classes in gen-insn-attr-x86.awk
  Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C
  x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
  x86: Fix checking of SRAT when node 0 ram is not from 0
  x86, cpuid: Add "volatile" to asm in native_cpuid()
  x86, msr: msrs_alloc/free for CONFIG_SMP=n
  x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
  x86: Add IA32_TSC_AUX MSR and use it
  x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers
  initramfs: add missing decompressor error check
  bzip2: Add missing checks for malloc returning NULL
  bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  sched: Fix broken assertion
  sched: Assert task state bits at build time
  sched: Update task_state_arraypwith new states
  sched: Add missing state chars to TASK_STATE_TO_CHAR_STR
  sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits
  sched: Teach might_sleep() about preemptible RCU
  sched: Make warning less noisy
  sched: Simplify set_task_cpu()
  sched: Remove the cfs_rq dependency from set_task_cpu()
  sched: Add pre and post wakeup hooks
  sched: Move kthread_bind() back to kthread.c
  sched: Fix select_task_rq() vs hotplug issues
  sched: Fix sched_exec() balancing
  sched: Ensure set_task_cpu() is never called on blocked tasks
  sched: Use TASK_WAKING for fork wakups
  sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE
  sched: Fix task_hot() test order
  sched: Fix set_cpu_active() in cpu_down()
  sched: Mark boot-cpu active before smp_init()
  sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
  ...

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sys: Fix missing rcu protection for __task_cred() access
  signals: Fix more rcu assumptions
  signal: Fix racy access to __task_cred in kill_pid_info_as_uid()

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: Remove duplicate setting of new_base in __mod_timer()
  clockevents: Prevent clockevent_devices list corruption on cpu hotplug

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Use strim instead of strstrip to avoid false warnings.
  [S390] qdio: add counter for input queue full condition
  [S390] qdio: remove superfluous log entries and WARN_ONs.
  [S390] ptrace: dont abuse PT_PTRACED
  [S390] cio: fix channel path vary
  [S390] drivers: Correct size given to memset
  [S390] tape: Add pr_fmt() macro to all tape source files
  [S390] rename NT_PRXSTATUS to NT_S390_HIGHREGS
  [S390] tty: PTR_ERR return of wrong pointer in fs3270_open()
  [S390] s390: PTR_ERR return of wrong pointer in fallback_init_cip()
  [S390] dasd: PTR_ERR return of wrong pointer in
  [S390] dasd: move dasd-diag kmsg to dasd
  [S390] cio: fix drvdata usage for the console subchannel
  [S390] wire up sys_recvmmsg

Several leaks in audit_tree didn't get caught by commit
318b6d3d, including the leak on normal
exit in case of multiple rules refering to the same chunk.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

... aka "Al had badly fscked up when writing that thing and nobody
noticed until Eric had fixed leaks that used to mask the breakage".

The function essentially creates a copy of old array sans one element
and replaces the references to elements of original (they are on cyclic
lists) with those to corresponding elements of new one.  After that the
old one is fair game for freeing.

First of all, there's a dumb braino: when we get to list_replace_init we
use indices for wrong arrays - position in new one with the old array
and vice versa.

Another bug is more subtle - termination condition is wrong if the
element to be excluded happens to be the last one.  We shouldn't go
until we fill the new array, we should go until we'd finished the old
one.  Otherwise the element we are trying to kill will remain on the
cyclic lists...

That crap used to be masked by several leaks, so it was not quite
trivial to hit.  Eric had fixed some of those leaks a while ago and the
shit had hit the fan...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use kzalloc rather than kcalloc(1,...)

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the per rx/tx queue stats.
To update the per rx queue stats a new structure has been
introduced rx_q_stats.
The per tx queue stats are updated via the netdev_queue
structure itself.

Note that we update only the tx_packtes, tx_bytes, rx_packets,
rx_bytes and rx_dropped stats on a per queue basis.
Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to enable filer whenever we need to use multiple RX
queues. Also, need to program RIR0 register with the required
distribution we require, if using RX filer hashing support for
packet distribution to multiple queues.
Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running the following script on an active bnx2 interface:

while(true); do ifconfig ethX mtu 9000; ifconfig ethX mtu 1500; done

A timeout error appears and dumps the following stack:

NETDEV WATCHDOG: eth4 (bnx2): transmit queue 0 timed out
------------[ cut here ]------------
Badness at net/sched/sch_generic.c:261
<snip>

This patch just fixes the way that ->trans_start is refreshed.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_get_irq returns -ENXIO on failure, so !irq was probably
always true.  Better use (int)irq <= 0.  Note that a return value of
zero is still handled as error even though this could mean irq0.

This is a followup to 305b3228 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The _ONSTACK variant should be used for on-stack completion,
otherwise it will break lockdep.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>