- 20 May, 2005 11 commits
-
-
Andrew Vasquez authored
Original from: Christoph Hellwig <hch@lst.de> Modified and Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
The fusion Kconfig forgets to set CONFIG_FUSION, which is required to get the upper makefile to descend into the fusion directory. Add this back as a variable and make the two upper level modules select it. Signed-off-by: -
Moore, Eric Dean authored
(1) mptfc.c: This driver is having module_init, module_exit, and probe. (2) mptfc.c: Registering for Fibre Channel pci ids are done from this module. (3) mptfc.c: Convert MODULE_PARM to module_param Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Signed-off-by:
-
Moore, Eric Dean authored
(1) mptspi.c: This driver is having module_init, module_exit, and probe. (2) mptspi.c: Registering for SCSI pci ids are done from this module. (3) mptspi.c: Convert MODULE_PARM to module_param Signed-off-by:
-
Moore, Eric Dean authored
(1) mptscsih.c: Remove credits, -sralston references , update copyright (2) mptscsih.c: split driver support (3) mptscsih.c: module_init, module_exit, and probe routines moved to new stub drivers, mptfc and mptspi (4) mptscsih.c: some global parameters are moved to MPT_SCSI_HOST (5) mptscsih.c: removed scsi_device_online check. Signed-off-by:
-
Moore, Eric Dean authored
(1) mptlan.c: Remove credits and update copyright (2) mptlan.c: Remove -sralston references Signed-off-by:
-
Moore, Eric Dean authored
(1) mptctl.c: Remove credits and update copyright (2) mptctl.c: cleanup in get_iocinfo Signed-off-by:
-
Moore, Eric Dean authored
(1) mptbase.c: Move registering pci ids to scsi lld drivers (2) mptbase.c: Use the DMA_32BIT_MASK constant (3) mptbase.c: Fix for multiple pci domains (4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size (5) mptbase.c: Remove credits, -sralston references , update copyright (6) mptbase.c: split driver support Signed-off-by:
-
Moore, Eric Dean authored
(1) Kconfig - added new mptspi and mptfc scsi lld drivers (2) Kconfig - increased MAX_SGE from 40 to 128 (2) Makefile - compilation support for split drivers (3) Makefile - cleaned up debug defines; e.g. removed obsolete, added others Signed-off-by:
-
James Bottomley authored
From: Christoph Hellwig <hch@lst.de> Both drivers are marked broken and haven't compiled since very early 2.5.x. And they're for IDE hardware so they shouldn't have been written to the SCSI layer at all. Signed-off-by: -
James Bottomley authored
Update SCSI firmware images: ql1040_fw.h: - * Firmware Version 7.65.00 (14:17 Jul 20, 1999) + * Firmware Version 7.65.06 (14:38 Jan 07, 2002) ql1280_fw.h: - * Firmware Version 8.15.00 (14:35 Aug 22, 2000) + * Firmware Version 8.15.11 (10:20 Jan 02, 2002) ql12160_fw.h: - * Firmware Version 10.04.32 (12:03 May 09, 2001) + * Firmware Version 10.04.42 (15:44 Apr 18, 2003) Signed-off-by:
-
- 21 Apr, 2005 10 commits
-
-
Andreas Herrmann authored
Signed-off-by:
Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by:
-
Nate Dailey authored
I noticed a case in sr_ioctl.c's sr_get_mcn where a buffer is allocated, but the pointer isn't checked for null. Signed-off-by:
Nate Dailey <nate.dailey@stratus.com> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by: -
Andrew Vasquez authored
Make transport-functions structure non-static. Replace #include of scsi_transport.h with a forward declaration. Signed-off-by:
-
Richard Henderson authored
Allocate syscall numbers for add_key, request_key, keyctl.
-
Karsten Keil authored
We do not longer use DLT_LINUX_SLL for activ/pass filters but DLT_PPP_WITHDIRECTION witch need 1 as outbound flag. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alexander Nyberg authored
The new out of line put_user() assembly on x86_64 changes %rcx without telling GCC about it causing things like: http://bugme.osdl.org/show_bug.cgi?id=4515 See to it that %rcx is not changed (made it consistent with get_user()). Signed-off-by:
Alexander Nyberg <alexn@telia.com> Signed-off-by: ak@suse.de Signed-off-by:
-
-
James Bottomley authored
My version of gcc doesn't warn about this error (declaration in the middle of a set of statements). The fix is simple (this also corrects return code; for init functions it should be zero or error).
-
Al Viro authored
PREEMPT+SMP support - see if it looks sane... Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 20 Apr, 2005 11 commits
-
-
Linus Torvalds authored
Releasing this will also make "git" the official source control thing. Here's to hoping for the best.
-
Herbert Xu authored
The following patch just makes the header part of the skb writeable. This is needed since we modify the IP headers just a few lines below. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Stephen Hemminger authored
Here is a revised alternative that uses BUG_ON/WARN_ON (as suggested by Herbert Xu) to eliminate NET_CALLER. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
David S. Miller authored
Noticed by Herbert Xu. Signed-off-by: -
Thomas Graf authored
Be kind to userspace and don't force them to hardcode protocol families just to have it changed again once we support routing rules for more than one protocol family. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Herbert Xu authored
While looking at this problem I noticed that IPv6 was sometimes looking at inet->recverr which is bogus. Here is a patch to correct that and use np->recverr. Signed-off-by:
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Herbert Xu authored
So here is a patch that introduces skb_store_bits -- the opposite of skb_copy_bits, and uses them to read/write the csum field in rawv6. Signed-off-by:
-
YOSHIFUJI Hideaki authored
From: Tushar Gohad <tgohad@mvista.com> Signed-off-by:
-
Herbert Xu authored
Signed-off-by:
-
- 19 Apr, 2005 8 commits
-
-
Hugh Dickins authored
Once all the MMU architectures define FIRST_USER_ADDRESS, remove hack from mmap.c which derived it from FIRST_USER_PGD_NR. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Hugh Dickins authored
Replace misleading definition of FIRST_USER_PGD_NR 0 by definition of FIRST_USER_ADDRESS 0 in all the MMU architectures beyond arm and arm26. Signed-off-by:
-
Hugh Dickins authored
ARM26 define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when they are mapped low), and use that definition in place of locally defined MIN_MAP_ADDR. Previously, ARM26 permitted user mappings at 0 if the machine vectors were mapped high; but that's inconsistent with ARM, and FIRST_USER_ADDRESS would then have to be determined at runtime. Let's fix it at PAGE_SIZE throughout the architecture. Signed-off-by:
-
Hugh Dickins authored
ARM define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when they are mapped low), and use that definition in place of locally defined MIN_MAP_ADDR. Signed-off-by:
-
Hugh Dickins authored
Remove use of FIRST_USER_PGD_NR from sys_mincore: it's inconsistent (no other syscall refers to it), unnecessary (sys_mincore loops over vmas further down) and incorrect (misses user addresses in ARM's first pgd). Signed-off-by:
-
Hugh Dickins authored
The patches to free_pgtables by vma left problems on any architectures which leave some user address page table entries unencapsulated by vma. Andi has fixed the 32-bit vDSO on x86_64 to use a vma. Now fix arm (and arm26), whose first PAGE_SIZE is reserved (perhaps) for machine vectors. Our calls to free_pgtables must not touch that area, and exit_mmap's BUG_ON(nr_ptes) must allow that arm's get_pgd_slow may (or may not) have allocated an extra page table, which its free_pgd_slow would free later. FIRST_USER_PGD_NR has misled me and others: until all the arches define FIRST_USER_ADDRESS instead, a hack in mmap.c to derive one from t'other. This patch fixes the bugs, the remaining patches just clean it up. Signed-off-by:
-
Hugh Dickins authored
Once we're strict about clearing away page tables, hugetlb_prefault can assume there are no page tables left within its range. Since the other arches continue if !pte_none here, let i386 do the same. Signed-off-by:
-
Hugh Dickins authored
While dabbling here in mmap.c, clean up mysterious "mpnt"s to "vma"s. Signed-off-by:
-
