- 09 Oct, 2007 4 commits
-
-
Robin Getz authored
Print out debug info, as early as possible - even before the kernel initializes the interrupt vectors. Now we can print out debug messages almost anytime during the boot process. Signed-off-by:
Robin Getz <robin.getz@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com>
-
Robin Getz authored
Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out Also ensure that the traps_c code doesn't cause a double fault, by sending a signal to a faulting kernel before the memory subsystem is fully initialized, by printing out the error message before sending the signal. Signed-off-by:
-
Robin Getz authored
Today when a double fault happens (exception during an exception handling event), we go into an endless loop, with nothing comming out the UART. With this patch, we actually see that we have commited a double fault event Signed-off-by:
-
Robin Getz authored
This allows debugging of problems which happen eary in the kernel boot process (after bootargs are parsed, but before serial subsystem is fully initialized) Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Bryan Wu authored
Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files, use the new REGBASE for board platform resources Signed-off-by:
-
- 09 Oct, 2007 1 commit
-
-
Bryan Wu authored
Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
- 12 Sep, 2007 2 commits
-
-
Bryan Wu authored
Signed-off-by: -
Mike Frysinger authored
Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Michael Hennerich authored
reboot failes on BF533 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3500Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
- 12 Sep, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 28 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Now that there is a generic GPIO driver framework remove GPIO register unified name space legacy support. Signed-off-by:
-
- 10 Oct, 2007 2 commits
-
-
Michael Hennerich authored
- Update gpio_request to allow multiple request with the same signature (label) - Use generic GPIO API where applicable - Update generic board support form stamp board Signed-off-by:
-
Michael Hennerich authored
Blackfin arch: For compatibility reasons change IRQ_XXX_ERR into IRQ_XXX_ERROR like on any other supported Blackfin derivative Signed-off-by:
-
- 27 Aug, 2007 1 commit
-
-
Robin Getz authored
Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well with DEBUG_KERNEL_START Signed-off-by:
-
- 28 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michale.hennerich@analog.com> Signed-off-by:
-
- 13 Sep, 2007 1 commit
-
-
Robin Getz authored
Signed-off-by:
-
- 27 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Singed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Mike Frysinger authored
rewrite our reboot code in C rather than assembly to be like other architectures and to allow board maintainers to define custom behavior Signed-off-by:
-
- 27 Aug, 2007 1 commit
-
-
Mike Frysinger authored
Break up our .init into separate section like all other ports do and so that we dont mix text and data (causes disassembly headaches as pointed out by Robin) Cc: Robin Getz <robin.getz@analog.com> Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Bryan Wu authored
Signed-off-by:
-
- 27 Aug, 2007 1 commit
-
-
Mike Frysinger authored
Signed-off-by:
-
- 05 Aug, 2007 10 commits
-
-
Mike Frysinger authored
add an exception request/free api similar to the interrupt request/fre api so people can utilize the free software based exceptions for their own purposes Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
- allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES. - change default NMI handler to simply dump hardware trace buffer. - remove default NMI handler completely as calling into kernel code is not safe move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Jie Zhang authored
Signed-off-by:
Jie Zhang <jie.zhang@analog.com> Signed-off-by:
-
Sonic Zhang authored
This API is necessary for DMA descriptor array mode. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Bryan Wu authored
kill ezkit548 compiling warning: - include/asm/cplb.h:42:5: warning: "ANOMALY_05000158" is not defined Signed-off-by: -
Mike Frysinger authored
update BOOT_LOAD help to reflect current state of the first 4k of our address space as well as add a memory range option to prevent invalid values Signed-off-by:
-
Robin Getz authored
Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
- 27 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Bug: When SMC921X driver is enabled, kernel boot crash on EZKIT548 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3460 Fixed by restoring mach dependent ASYNC memory size CPLB coverage. Once we have a more dynamic memory layout we should come up with a better solution for these hard-coded values. Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Robin Getz authored
now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by:
-
- 03 Aug, 2007 2 commits
-
-
Mike Frysinger authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
- 05 Aug, 2007 1 commit
-
-
Michael Hennerich authored
Signed-off-by:
-
- 10 Oct, 2007 1 commit
-
-
Roy Huang authored
Signed-off-by:
Roy Huang <roy.huang@analog.com> Signed-off-by:
-
- 25 Jul, 2007 1 commit
-
-
Robin Getz authored
Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by:
-
- 03 Aug, 2007 1 commit
-
-
Robin Getz authored
Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by:
-
