- 09 Jul, 2008 4 commits
-
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
pxa_set_cken() is now unused, remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
-
Russell King authored
We need to support more than one name+device for a struct clk for a small number of peripherals. We do this by re-using struct clk alias to another struct clk - IOW, if we find that the entry we're using is an alias, we return the aliased entry not the one we found. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 07 Jul, 2008 4 commits
-
-
Stefan Schmidt authored
Warn people when using pxa2xx-gpio.h as it is only here for backwards compatibility. The new mfp-pxa2[57]x.h and the relevant API should be used instead. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
Both i2c-pxa.c and irq.c still include pxa2xx-gpio.h although is is not needed anymore. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Jaya Kumar authored
This patch adds exit and remove handlers to pxafb so that it can be loaded and unloaded as a module. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
eric miao authored
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 03 Jul, 2008 11 commits
-
-
Guennadi Liakhovetski authored
PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This patch adds support for these displays and for the backlight, using the pwm_bl driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
magician has a GPIO that modifies the brightness level additionally to the PWM duty value. This patch makes use of the pwm_bl notify callback to present userspace with a single brightness scale. This gets rid of the pxa_set_cken calls and direct PWM register access. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Make the return of pwm_request() be more informative than just being NULL on error by using PTR_ERR() to respond with an approriate error. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
This allows platform code to manipulate GPIOs and brightness level as needed. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
eric miao authored
Patch mostly by Eric Miao, minor edits by rmk. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
eric miao authored
Patch mostly from Eric Miao, with minor edits by rmk to convert Eric's driver to a generic PWM-based backlight driver. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Robert Jarzmik authored
Allow pwm_enable()/pwm_disable() to be called as many times as the driver wants (and not even count them). The PWM model is different from things like the clock API where we need enable counting, because PWMs have one exclusive user per PWM whereas the clock API can have multiple users of the same clock. Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Guennadi Liakhovetski authored
as a module Without a GPL-compatible license this driver cannot be built as a module, because the platform_driver_* API is only exported to GPL modules. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
Currently PWM0/2 (pxa27x_device_pwm0 at 0x40b00000 and 0x40b00010 are registered as as pwm_id 0 and 1, PWM1/3 (pxa27x_device_pwm1 at 0x40c00000 and 0x40c00010) are registered as pwm_id 2 and 3. This patch corrects the pwm_ids to match the documented register names. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 15 Jun, 2008 2 commits
-
-
Stefan Schmidt authored
This adds the definition for the third USB port control register UP3OCR. It is used on the EZX GSM mobile phones. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
and include pxa2xx-regs.h as build fix since PSSR definitions moved from pxa-regs.h into pxa2xx-regs.h. Note: This change is temporary as pxa27x processor specific code will be finally moved elsewhere (both drivers should support pxa3xx, too). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 02 Jun, 2008 13 commits
-
-
Dmitry Baryshkov authored
As nothing in the code references to the PXA_SHARPSL_25x/27x, we can drop that Kconfig case and permit all-zaurus builds. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Mike Rapoport authored
Combine cm_x270_defconfig and em_x270_defconfig to allow running the same kernel on both machines Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert the 'choice' into a 'menu' to allow multiple platforms to be selected. This means to do a build check across PXA, you don't end up spending a lifetime building _twenty_ sodding kernels. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Mike Rapoport authored
Adjust zones for PCI DMA only if machine_is_armcore() to allow running the same kernel on different PXA machines. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The power manager and core clock registers aren't present in PXA3 CPUs. Move them out of pxa-regs.h into pxa2xx-regs.h, and include pxa2xx-regs.h where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Philipp Zabel authored
This fixes a build error introduced when the power manager register definitions were moved into pxa2xx-regs.h. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
standby.S contains both PXA2 and PXA3 specific code. The PXA3 specific constants clash with the PXA2 ones, so give them a prefix. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
When a dynamically allocated platform device is 'put', the platform device's platform_data is kfree'd. This is bad if it's pointing at static data. Use the provided function to register platform data for these devices. This also means we can mark the pcmcia ops structures as __initdata. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
cm_x270 and mainstone both register their PCMCIA devices using the same name, resulting in a warning message from the kernel. Avoid this by making the cm_x270 and mainstone PCMCIA initialisation conditional on the machine type we're running on. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Don't register the LPD270 cpld_irq system device when we're not running on a LPD270 machine - "cpld_irq" is also registered (separately) by Lubbock and Mainstone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 19 May, 2008 4 commits
-
-
Russell King authored
The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
If CONFIG_BACKLIGHT_CORGI is not selected, then corgibl_limit_intensity() is not present. However, both corgi_pm.c and sharp_pm.c reference this symbol, resulting in a link error. Wrap the references with the relevant ifdefs, and avoid the resulting NULL pointer dereference by making the code in sharpsl_pm.c also conditional on the config symbol. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
eric miao authored
Patch mainly from Eric Miao, with minor edits by rmk. Note: PWM0 and PWM2 share the same register I/O space and clock gating on pxa{27x, 3xx}, thus PWM2 is treated in the driver as a child PWM of PWM0. And this is also true for PWM1/3. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 18 May, 2008 2 commits
-
-
Linus Torvalds authored
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/max6875: Really prevent 24RF08 corruption i2c-amd756: Fix functionality flags i2c: Kill the old driver matching scheme i2c: Convert remaining new-style drivers to use module aliasing i2c: Switch pasemi to the new device/driver matching scheme i2c: Clean up Blackfin BF527 I2C device declarations i2c-nforce2: Disable the second SMBus channel on the DFI Lanparty NF4 Expert i2c: New co-maintainer
-