- 21 Feb, 2007 40 commits
-
-
Ian Armstrong authored
Many thanks to Ian Armstrong for figuring out what all these registers do. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
When capturing a 60 Hz input the internal field ID is inverted. The VIDIOC_INT_G_VBI_DATA didn't take that into account and so returned XDS instead of CC and vice versa. Signed-off-by:
-
Hans Verkuil authored
Remove a section containing basically ideas for future sliced VBI standards. This can be resurrected should any of this be actually implemented. For now it only pollutes this header file. Signed-off-by:
-
Hans Verkuil authored
The Sliced VBI API is no longer marked experimental. Introduced in 2.6.14 and with only a single modification in 2.6.19 I think we can consider this API to be solid. Signed-off-by:
-
Hans Verkuil authored
Revisions >= 23 were always reported as revision 23. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mike Isely authored
Support 64 bit register IDs internally. Only allow root access to this API (for both set and get). Note that actual 64 bit access only becomes possible once the definition for v4l2_register is updated, but this change clears the way for it from the viewpoint of the pvrusb2 driver. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Tweak the encoder setup in order to stop it from corrupting the video data when there is a disruption in the data flow (e.g. a channel change). Signed-off-by:
-
Mike Isely authored
Update the implementation of the communication protocol for operating the encoder, using updated knowledge about the encoder. Signed-off-by:
-
Mike Isely authored
Several special-case FX2 commands were being issued through pvr2_write_u16() and pvr2_write_8(), but there's really nothing special case about them. These date from a very early time in the driver development. This patch removes these functions and replaces their use with calls to pvr2_send_request. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Michael Krufky authored
This is a maintainability cleanup; use nice names for all the FX2 commands instead of raw bytes. This way we can easily find where we issue FX commands. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Trent Piepho authored
The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
input_register_device() was changed to return an error code instead of being void in 2.6.15. Handle it with a macro wrapper in config.h. For this to work, linux/input.h must be included before config.h. This required some trivial header re-ordering in budget-ci.c and ttusb_dec.c. In kernel 2.6.15-rc1 a helper function called setup_timer() was added to linux/timer.h. Add to compat.h, but require that linux/timer.h be included first to give the definition of struct timer_list. A new 4GB DMA zone, __GFP_DMA32, was added in 2.6.15-rc2. Alias it to __GFP_DMA on older kernels. Handle another 2.6.15 "input_dev->dev to input_dev->cdev.dev" change for some recently added code in cinergyT2.c. Signed-off-by:
-
Trent Piepho authored
Before, root privileges were only needed to set hardware registers, not to read them. On some hardware, reading from the wrong place at the wrong time can hang the machine. So, to be consistent, root privileges are required to read registers on all hardware. Signed-off-by:
-
Trent Piepho authored
Maybe someday there will be a device with a register address space > 32-bits, or maybe an i2c device which uses a protocol > 4 bytes long to address its registers. Signed-off-by:
-
Marco Schluessler authored
Call saa7146_vv_release() on exit. Signed-off-by:
Marco Schluessler <marco@lordzodiac.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Marco Schluessler authored
Pass correct memory size to pci_free_consistent. Signed-off-by:
-
Oliver Endriss authored
Fixed unregistering the vbi device for cards without analog tuner. Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing out this bug. Signed-off-by:
-
Matthias Schwarzott authored
Add phys-string, bustype, version, vendor and product to help udev and others using EVIOCPHYS ioctl to identify the input device node. Code taken (with little changes) from budget-ci.c Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Michael Schimek authored
Functions buffer_release() in bttv-driver.c and vbi_buffer_release() in bttv-vbi.c are ending with: bttv_dma_free(&fh->cap,fh->btv,buf); For vbi it seems to be wrong. Both functions should end with: bttv_dma_free(q,fh->btv,buf); Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this. Signed-off-by:Michael H. Schimek <mschimek@gmx.at> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
With debug>0, it will show mute/unmute and set frequency events with debug>=4, it will show get frequency events Also, some kernel CodingStyle fixes were done. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
fmtools use VIDIOCSTUNER, with, in turn, calls VIDIOC_S_INPUT on v4l1-compat. So, those ioctls are required for V4L1 to work properly. Signed-off-by: -
Mauro Carvalho Chehab authored
v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: -
Mauro Carvalho Chehab authored
v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Before this patch, vivi were simulating a scatter gather DMA transfer. While this is academic, showing how stuff really works on a real PCI device, this means a non-optimized code. There are only two memory models that vivi implements: 1) kernel alloced memory. This is also used by read() method. On this case, a vmalloc32 buffer is allocated at kernel; 2) userspace allocated memory. This is used by most userspace apps. video-buf will store this pointer. a simple copy_to_user is enough to transfer data. The third memory model scenario supported by video-buf is overlay mode. This model is not implemented on vivi and unlikely to be implemented on newer drivers, since now, most userspace apps do some post-processing (like de-interlacing). After this patch, some cleanups may be done at video-buf.c to avoid allocating pages, when the driver doesn't need a PCI buffer. This is the case of vivi and usb drivers. Signed-off-by: -
Trent Piepho authored
The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by:
-
Trent Piepho authored
Add support for these ioctls to the video_ioctl2 system and the cx88 driver. Signed-off-by:
-
Michael Krufky authored
Move filter caps from device caps to adapter caps for the megasky driver. This fixes usb1.1 operation. Signed-off-by:
Aapo Tahkola <aet@rasterburn.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Aapo Tahkola authored
Fixes qt1010 identification bug with megasky caused by the Quantek QT1010 tuner module patch. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Antti Palosaari authored
QT1010: - old qt1010-code totally rewritten and put in own kernel module - same enhancements as my earlier QT1010 125kHz patch - tuner initialization - register 1f calculation - register 20 calculation - register 25 calculation m920x: (MSI Megasky) - use new QT1010 module instead of old code Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Michael Krufky authored
move .caps from the adapter properties to the device properties. Thanks to Martin Schwier for confirming this fix. Signed-off-by:
-
Jan Nijs authored
This patch changes qt1010.h to use dvb_usb_device struct instead of a dvb_usb_adapter for accessing the private area of the driver. Without this patch my PC hard locks when an application tries to access the DVB tuner. Signed-off-by:
Jan Nijs <jan.nijs@scarlet.be> Signed-off-by:
-
