Commits · 321d9eb32a903edc30a499262ad5b42cda98656c · linux / linux-davinci

05 Jun, 2009 40 commits

[ARM] pxa/cm-x300: use STUART for uncompressor · 321d9eb3

Mike Rapoport authored Jun 04, 2009

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

321d9eb3

[ARM] pxa/cm-x300: add rtc-v3020 device registration · 1858ced3

Mike Rapoport authored Jun 04, 2009

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

1858ced3

[ARM] pxa/cm-x300: use OBM configuration for NAND flash · b3992b66

Mike Rapoport authored Jun 04, 2009

CM-X300 can be assembled with different NAND flashes from different
manufacturers. Adding their configuration to the kernel is impractical,
therefore we will use the default NAND controller settings set up by the
bootloader.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

b3992b66

[ARM] pxa/em-x270, cm-x270: use DEEPSLEEP for PM_SUSPEND_MEM · 9599d1db
Mike Rapoport authored May 26, 2009
```
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
9599d1db

[ARM] pxa/em-x270: add support for on-board USB Hub · 128d88b8

Mike Rapoport authored May 12, 2009

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

128d88b8

[ARM] pxa/em-x270: change power supply name to "battery" · 3690a0f4
Mike Rapoport authored May 12, 2009
```
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
3690a0f4

[ARM] pxa/em-x270: update libertas device setup · 2f15cb59

Mike Rapoport authored May 12, 2009

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

2f15cb59

[ARM] pxa/em-x270: add exeda GPIO extender and update GPIO mappings · 76e3fc36
Mike Rapoport authored May 12, 2009
```
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
76e3fc36

[ARM] pxa/ezx: setup gpio-keys for EzX phones · 1ce2c51e

Antonio Ospite authored Jun 01, 2009

Setup gpio-keys for EzX phones
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

1ce2c51e

[ARM] pxa/spitz: drop unused header files from spitz.c · f0ba4017
Dmitry Eremin-Solenikov authored May 17, 2009
```
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
f0ba4017
[ARM] pxa/imote2: add i2c board info for the wm8940 audio codec · 0a0ca89d
Jonathan Cameron authored May 25, 2009
```
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
0a0ca89d
[ARM] pxa/imote2: add board config for SHT15 humidity sensor · a2520846
Jonathan Cameron authored May 25, 2009
```
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
a2520846
[ARM] pxa/stargate2: add support for Compact Flash/PCMCIA · 5aeb1a5e
Jonathan Cameron authored May 12, 2009
```
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
5aeb1a5e
[ARM] pxa/stargate2: Add board specific elements to the smc91x driver · 80153d1b
Jonathan Cameron authored May 12, 2009
```
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
80153d1b

[ARM] pxa: Stargate 2 board support · 4036e1de

Jonathan Cameron authored May 16, 2009

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

4036e1de

[ARM] pxa/palm: Palm TX, T5, LD suspend-to-mem rework · fc9c1b6f

Marek Vasut authored May 14, 2009

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

fc9c1b6f

[ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2 · 37330efd

Marek Vasut authored Apr 23, 2009

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

37330efd

[ARM] pxa/palm: Switch PalmT5, TX, TE2 to GPIO VBUS · 8768dc9b

Marek Vasut authored Apr 23, 2009

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

8768dc9b

[ARM] pxa/csb726: register ac97 controller · 96a9fcaf

Dmitry Eremin-Solenikov authored Apr 22, 2009

Add a call to pxa_set_ac97_info() to enable the audio support.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

96a9fcaf

[ARM] pxa/csb726: switch to use smsc911x driver · b8601715

Dmitry Eremin-Solenikov authored Apr 22, 2009

csb726 used obsolete and not working out-of-tree driver smc911x.
Switch it to use new smsc911x driver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

b8601715

MAINTAINERS: add a maintainer for iPAQ hx4700 · ef47d5f0

Philipp Zabel authored May 28, 2009

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

ef47d5f0

[ARM] pxa: magician_defconfig enable hx4700, asic3 and w100fb · dd045445

Philipp Zabel authored May 26, 2009

I'm not going to maintain separate defconfigs for magician and hx4700.
This should probably be renamed to htcpxa_defconfig.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

dd045445

[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs · d3ca1952

Philipp Zabel authored May 28, 2009

This includes
- IrDA (pxafixp_ir),
- Buttons (gpio-keys),
- ASIC3 IRQ/GPIOs (asic3),
- EGPIOs (htc-egpio),
- ATI Imageon w3220 framebuffer (w100fb),
- Backlight (pwm-backlight),
- StrataFlash (physmap),
- Battery monitor (ds1wm,w1_ds2760,ds2760_battery)
- USB gadget support (pxa27x_udc,gpio_vbus).
- bq24022 battery charger (pda_power,bq24022)
- TSC2046 touchscreen (ads7846)
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

d3ca1952

[ARM] pxa/magician: use ARRAY_AND_SIZE for platform_add_devices · 2f1a5bf7
Philipp Zabel authored Apr 28, 2009
```
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
2f1a5bf7

[ARM] pxa/magician: use I2C fast mode · f8f9d5ec

Philipp Zabel authored Apr 17, 2009

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

f8f9d5ec

[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx · 3dbeef23

Robert Jarzmik authored May 17, 2009

Add voltage regulation capability to pxa2xx cpufreq
driver. The cpufreq will ask for a "vcc_core" regulator to
the regulator framework.

If a regulator is found at probe time, it will be used with
values specified in PXA270 Electrical, Mechanical, and
Thermal Specifications.

If not, it will be assumed for now that frequency change
will work without voltage control. This assumes that the
IPL/SPL installs sane values to an existing voltage
regulator (ie. voltage high enough to support the full
range).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

3dbeef23

[ARM] pxa: add additional mfp definitions for pxa320 · dd5b94ab

Jürgen Schindele authored Jun 04, 2009

Signed-off-by: Jürgen Schindele <linux@schindele.name>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

dd5b94ab

[ARM] pxa: add ability to set suspend mode · d082d36e

Mike Rapoport authored May 26, 2009

PXA processors have several low-power modes. Currently kernel supports
only one of these modes for PM_SUSPEND_MEM.

This patch adds ability to set desired suspend mode for PXA27x based
machines.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Reviewed-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

d082d36e

[ARM] pxa: add udc support for pxa3xx · 94c35a6b

Robert Jarzmik authored Apr 21, 2009

As reported by Aric Blumer, the pxa27x_udc driver does work
with pxa3xx devices. Add support into device files.
Reported-by: Aric Blumer <aric@sdgsystems.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Matt Reimer <mattjreimer@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

94c35a6b

[ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use it · a01bd584

Philipp Zabel authored Apr 17, 2009

The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70.

My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards
need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo
or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS.
Increasing the default number of board IRQs to 70 instead doesn't seem very nice.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

a01bd584

[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field · 46580c03
Mike Rapoport authored Apr 14, 2009
```
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
```
46580c03