- 01 Feb, 2009 4 commits
-
-
Steve Glendinning authored
Some platforms (for example pcm037) do not have an EEPROM fitted, instead storing their mac address somewhere else. The bootloader fetches this and configures the ethernet adapter before the kernel is started. This patch allows a platform to indicate to the driver via the SMSC911X_SAVE_MAC_ADDRESS flag that the mac address has already been configured via such a mechanism, and should be saved before resetting the chip. Signed-off-by:
Steve Glendinning <steve.glendinning@smsc.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
David S. Miller <davem@davemloft.net>
-
Steve Glendinning authored
On LAN9115/LAN9117/LAN9215/LAN9217, external phys are supported. These are usually indicated by a hardware strap which sets an "external PHY detected" bit in the HW_CFG register. In some cases it is desirable to override this hardware strap and force use of either the internal phy or an external PHY. This patch adds SMSC911X_FORCE_INTERNAL_PHY and SMSC911X_FORCE_EXTERNAL_PHY flags so a platform can indicate this preference via its platform_data. Signed-off-by:
-
Steve Glendinning authored
The isr supports shared operation, so register it with the IRQF_SHARED flag to indicate this. This patch also removes the IRQF_DISABLED flag. This driver doesn't need it, and IRQF_DISABLED isn't guaranteed when using shared interrupts. Signed-off-by:
-
Steve Glendinning authored
this patch adds support for the platform_device's resources to indicate additional flags to use when registering the irq, for example IORESOURCE_IRQ_LOWLEVEL (which corresponds to IRQF_TRIGGER_LOW). These should be set in the irq resource flags field. Signed-off-by:
-
- 30 Jan, 2009 32 commits
-
-
David S. Miller authored
Conflicts: drivers/net/e1000/e1000_main.c
-
Herbert Xu authored
As the mmap handler gets called under mmap_sem, and we may grab mmap_sem elsewhere under the socket lock to access user data, we should avoid grabbing the socket lock in the mmap handler. Since the only thing we care about in the mmap handler is for pg_vec* to be invariant, i.e., to exclude packet_set_ring, we can achieve this by simply using a new mutex. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Martin MOKREJŠ <mmokrejs@ribosome.natur.cuni.cz> Signed-off-by:
-
Ben Hutchings authored
Currently we use a spin-lock to serialise statistics fetches and also to inhibit them for short periods of time, plus a flag to enable/disable statistics fetches for longer periods of time, during online reset. This was apparently insufficient to deal with the several reasons for stats being disabled. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by:
-
Ben Hutchings authored
This workaround is not specific to rev A. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Steve Hodgson authored
Depending on the loopback mode, there may be no pertinent link state bits. In this case we test the PHYXS RX fault bit instead. Make sure to do this in all cases where there are no link state bits. Signed-off-by:
-
Steve Hodgson authored
In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by:
-
Steve Hodgson authored
Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the MAC is the same as it was before. This ensures that the value is correct after an online reset. Signed-off-by:
-
Ben Hutchings authored
Change sfn4111t_reset() to change only GPIO output enables so that it doesn't break subsequent I2C operations. Update comments to explain exactly what we're doing. Add a short sleep to make sure the FLASH_CFG_1 value is latched before any subsequent I2C operations. Signed-off-by:
-
Steve Hodgson authored
Instead of disabling AN in loopback, just prevent restarting AN and override the speed in sft9001_get_settings(). Signed-off-by:
-
Steve Hodgson authored
Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by:
-
Steve Hodgson authored
Enable a firmware option that appears to be necessary for reliable operation. Signed-off-by:
-
Alexey Dobriyan authored
Printing anything over netconsole before hw is up and running is, of course, not going to work. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Philippe De Muyter authored
with current kernels, tulip 21142 ethernet controllers fail to connect to a 10Mbps only (i.e. without negotiation-partner) network. It used to work in 2.4 kernels. Fix that. Tested on a 21142 Rev 0x11. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Roel Kluin authored
Fix inverted logic Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Anton Vorontsov authored
commit 0f0ca340 ("phy: power management support") caused a regression in the gianfar driver. Now phylib turns off PHY power during suspend, and thus WOL doesn't work anymore. This patch workarounds the issue by enabling wakeup in the MDIO device, i.e. just restores the old behaviour for the gianfar driver. Note that this way all PHYs on a given MDIO bus won't be turned off during suspend, which isn't good from the power saving point of view. A proper, per netdevice wakeup management support will need a bit reworked phylib suspend/resume logic. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Roel Kluin authored
With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by:
-
Steve Glendinning authored
smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by:
-
Haiying Wang authored
The commit b31a1d8b ("gianfar: Convert gianfar to an of_platform_driver") changes the gianfar's phy id to the format like "mdio@xxxx:xx", but uec still uses the old format like "xxxxxxxx:xx". For the board whose UEC uses gianfar-mdio like MPC8568MDS, the phy can not be attached because of the incompatible phy id format. This patch changes uec's phy id to the same format as gianfar's. Signed-off-by:
Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by:
-
Inaky Perez-Gonzalez authored
As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by:
Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
-
Daniel Marjamäki authored
For kernel bugzilla #12537: http://bugzilla.kernel.org/show_bug.cgi?id=12537 Free memory. Signed-off-by:
Daniel Marjamäki <danielm77@spray.se> Signed-off-by:
-
David S. Miller authored
Based upon a report from Michael Tokarev <mjt@tls.msk.ru>: Just saw in dmesg: ioctl32(kvm:4408): Unknown cmd fd(9) cmd(800454cf){t:'T';sz:4} arg(ffc668e4) on /dev/net/tun Signed-off-by: -
Herbert Xu authored
This patch optimises napi_fraginfo_skb to only copy the bits necessary. We also open-code the memcpy so that the alignment information is always available to gcc. Signed-off-by:
-
Herbert Xu authored
gro: Do not merge paged packets into frag_list Bigger is not always better :) It was easy to continue to merged packets into frag_list after the page array is full. However, this turns out to be worse than LRO because frag_list is a much less efficient form of storage than the page array. So we're better off stopping the merge and starting a new entry with an empty page array. In future we can optimise this further by doing frag_list merging but making sure that we continue to fill in the page array. Signed-off-by:
-
Herbert Xu authored
Unfortunately simplicity isn't always the best. The fraginfo interface turned out to be suboptimal. The problem was quite obvious. For every packet, we have to copy the headers from the frags structure into skb->head, even though for 99% of the packets this part is immediately thrown away after the merge. LRO didn't have this problem because it directly read the headers from the frags structure. This patch attempts to address this by creating an interface that allows GRO to access the headers in the first frag without having to copy it. Because all drivers that use frags place the headers in the first frag this optimisation should be enough. Signed-off-by:
-
Herbert Xu authored
Currently VLAN still has a bit of common code handling the aftermath of GRO that's shared with the common path. This patch moves them into shared helpers to reduce code duplication. Signed-off-by:
-
Benjamin Zores authored
Signed-off-by:
Benjamin Zores <benjamin.zores@alcatel-lucent.fr> Signed-off-by:
-
Stephen Hemminger authored
This documentation is old. Add a short note to describe why aliases are no long necessary, and remove the old contact/edit info. Signed-off-by:
-
Shyam Iyer authored
It oopsd for me in skb_seq_read. addr2line said it was linux-2.6/net/core/skbuff.c:2228, which is this line: while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) { I added some printks in there and it looks like we hit this: } else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; } Actually I did some testing and added a few printks and found that the st->cur_skb->data was 0 and hence the ptr used by iscsi_tcp was null. This caused the kernel panic. if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); I enabled the debug_tcp and with a few printks found that the code did not go to the next_skb label and could find that the sequence being followed was this - It hit this if condition - if (st->cur_skb->next) { st->cur_skb = st->cur_skb->next; st->frag_idx = 0; goto next_skb; And so, now the st pointer is shifted to the next skb whereas actually it should have hit the second else if first since the data is in the frag_list. else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; goto next_skb; } Reversing the two conditions the attached patch fixes the issue for me on top of Herbert's patches. Signed-off-by:Shyam Iyer <shyam_iyer@dell.com> Signed-off-by:
-
Herbert Xu authored
The frag_list handling was broken in skb_seq_read: 1) We didn't add the stepped offset when looking at the head are of fragments other than the first. 2) We didn't take the stepped offset away when setting the data pointer in the head area. 3) The frag index wasn't reset. This patch fixes both issues. Signed-off-by:
-
Dhananjay Phadke authored
Reducing jumbo ring size below 1024 reduces throughput for old firmwares (3.4.216 and older) running on older (NX2031) chip, so restore it back to 1024. This was reduced in commit 32ec8033 ("netxen: reduce memory footprint"). Raising jumbo ring size from 512 to 1024, adds ~4MB per port, but there's still big saving because of original patch (~20MB per port). Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
-
- 29 Jan, 2009 4 commits
-
-
-
Bob Copeland authored
ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by:
Bob Copeland <me@bobcopeland.com> Acked-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
When CONFIG_CFG80211_REG_DEBUG is enabled and an intersection occurs we are printing the regulatory domain passed by CRDA and indicating its the intersected regulatory domain. Lets fix this and print the intersection as originally intended. Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Luis R. Rodriguez authored
This fixes two issues with the sanity check loop when processing the country IE: 1. Do not use frequency for the current subband channel check, this was a big fat typo. 2. Apply the 5 GHz 4-channel steps when considering max channel on each subband as was done with a recent patch. Signed-off-by:
-
