- 01 May, 2005 40 commits
-
-
Adrian Bunk authored
This patch fixes a check after use found by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
This patch removes some completely unused code. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Antonino A. Daplas authored
- Add 'vram' option to specify amount of video RAM to remap - Limit remap size to 64 MIB - Use info->screen_size for remapped RAM - Fix misplaced label in failure path Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch adds to the fbdev interface a set_cmap callback that allow the driver to "batch" palette changes. This is useful for drivers like radeonfb which might require lenghtly workarounds on palette accesses, thus allowing to factor out those workarounds efficiently. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Patrick Gefre authored
Arm the read timeout timer before the first read. Signed-off-by:
Patrick Gefre <pfg@sgi.com> Signed-off-by:
-
Patrick Gefre authored
Small mods for setting up the uart - parity, flow control Signed-off-by:
-
Patrick Gefre authored
Set the timeout and threshold to better values. Signed-off-by:
-
Patrick Gefre authored
Allow hardware flow control to be set from an ioctl. Signed-off-by:
-
Peter Missel authored
Add device table support for the LR214WF card. The driver will say it's a FlyTV, simply because the name strings are stored with the card design data, not the device ID data. Signed-off-by:
-
Mingming Cao authored
The extra race-with-truncate-then-retry logic around ext3_get_block_handle(), which was inherited from ext2, becomes unecessary for ext3, since we have already obtained the ei->truncate_sem in ext3_get_block_handle() before calling ext3_alloc_branch(). The ei->truncate_sem is already there to block concurrent truncate and block allocation on the same inode. So the inode's indirect addressing tree won't be changed after we grab that semaphore. We could, after get the semaphore, re-verify the branch is up-to-date or not. If it has been changed, then get the updated branch. If we still need block allocation, we will have a safe version of the branch to work with in the ext3_find_goal()/ext3_splice_branch(). The code becomes more readable after remove those retry logic. The patch also clean up some gotos in ext3_get_block_handle() to make it more readable. Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Gerd Knorr authored
msp3400 update: Fix and enable "simpler" mode, some other minor fixes. Signed-off-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Gerd Knorr authored
update cx22702 fe driver, add support for using the dvb pll lib, enable cx22702 support in cx88-dvb. Signed-off-by:
-
Gerd Knorr authored
Fixup error path, without that one the driver kills the machine by oopsing in the IRQ handler in case the frontend initialization fails. Signed-off-by:
-
Al Viro authored
Since we only access reiserfs_key ->u.k_offset_v2 guts in four helper functions, we are free to sanitize those, as long as - layout of the structure is unchanged (it's on-disk object) - behaviour of these helpers is same as before. Patch kills the mess with endianness-dependent bitfields and replaces them with a single __le64. Helpers are switched to straightforward shift/and/or. Benefits: - exact same definitions for little- and big-endian architectures; no ifdefs in sight. - generate the same code on little-endian and improved on big-endian. - doesn't rely on lousy bitfields handling in gcc codegenerator. - happens to be standard C (unsigned long long is not a valid type for a bitfield; it's a gccism and not well-implemented one, at that). Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Cc: <reiserfs-dev@namesys.com> Signed-off-by:
-
Al Viro authored
comp_short_keys() massaged into sane form, which kills the last place where pointer to in_core_key (or any object containing such) would be cast to or from something else. At that point we are free to change layout of in_core_key - nothing depends on it anymore. So we drop the mess with union in there and simply use (unconditional) __u64 k_offset and __u8 k_type instead; places using in_core_key switched to those. That gives _far_ better code than current mess - on all platforms. Signed-off-by:
-
Al Viro authored
fixes for a couple of bugs exposed by the above: le32_to_cpu() used on 16bit value and missing conversion in comparison of host- and little-endian values. Signed-off-by:
-
Al Viro authored
little-endian objects annotated as such; again, obviously no changes of resulting code, we only replace __u16 with __le16, etc. in relevant places. Signed-off-by:
-
Al Viro authored
struct reiserfs_key cloned; (currently) identical struct in_core_key added. Places that expect host-endian data in reiserfs_key switched to in_core_key. Basically, we get annotation of reiserfs_key users and keep the resulting tree obviously equivalent to original. Signed-off-by:
-
Ian Kent authored
Bump autofs4 version so we know what's going on. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Ian Kent authored
For tree mount maps, a call to chdir or chroot, to a directory above the moint point directories at a certain time during the expire results in the expire incorrectly thinking the tree is not busy. This patch adds a check to see if the filesystem above the tree mount points is busy and also locks the filesystem during the tree mount expire to prevent the race. Signed-off-by:
-
Ian Kent authored
It's possible for an event wait request to arive before the event requestor. If this happens the daemon never gets notified and autofs hangs. Signed-off-by:
-
Colin Leroy authored
This patch fixes the leak of sb->s_fs_info in both the HFS and HFS+ modules. In addition to this, it fixes an oops happening when trying to mount a non-hfsplus filesystem using hfsplus. This patch is from Roman Zippel, based off patches sent by myself. Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Ken Chen authored
This patch optimizes io_submit_one to call aio_run_iocb() directly if ctx->run_list is empty. When the list is empty, the operation of adding to the list, then call to __aio_run_iocbs() is unnecessary because these operations are done in one atomic step. ctx->run_list always has only one element in this case. This optimization speeds up industry standard db transaction processing benchmark by 0.2%. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by:
-
Ken Chen authored
Clean up code that was previously used for debug purpose. Remove aio_run, aio_wakeups, iocb->ki_queued and iocb->ki_kicked. Also clean up unused variable count in __aio_run_iocbs() and debug code in read_events(). Signed-off-by:
-
Ken Chen authored
Since the tail pointer in aio_ring structure never wrap ring size more than once, so a simple compare is sufficient to wrap the index around. This avoid a more expensive mod operation. Signed-off-by:
-
Ken Chen authored
This patch removes superfluous kiocb member initialization in the AIO allocation and deallocation path. For example, in really_put_req(), right before kiocb is returned to slab, 5 variables are reset to NULL. The same variables will be initialized at the kiocb allocation time, so why bother reset them knowing that they will be set to valid data at alloc time? Another example: ki_retry is initialized in __aio_get_req, but is initialized again in io_submit_one. Signed-off-by:
-
Emanuele Giaquinta authored
I've noticed that, starting from linux-2.6.12-rc1, in the top Makefile the "cmd_tags" variable has been changed in a way incompatible with *emacs ctags. Since the "--extra" option exists only in "exuberant ctags", it should be included in the CTAGSF shell variable. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Yum Rayan authored
This patch reduces the stack usage of the function serial_event() in serial_cs from 2212 to 228. I used a patched version of gcc 3.4.3 on i386 with -fno-unit-at-a-time disabled. This patch is only compile tested. Acked-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
Yum Rayan <yum.rayan@gmail.com> Signed-off-by:
-
Roland Dreier authored
Fix order of #include lines in mthca_memfree.c Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Jesper Juhl authored
Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Jesper Juhl authored
This patch adds a new function valid_signal() that tests if its argument is a valid signal number. The reasons for adding this new function are: - some code currently testing _NSIG directly has off-by-one errors. Using this function instead avoids such errors. - some code currently tests unsigned signal numbers for <0 which is pointless and generates warnings when building with gcc -W. Using this function instead avoids such warnings. I considered various places to add this function but eventually settled on include/linux/signal.h as the most logical place for it. If there's some reason this is a bad choice then please let me know (hints as to a better location are then welcome of course). Signed-off-by:
-
Kylene Hall authored
This patch adds the maintainers entry. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Andreas Schwab authored
Signed-off-by:
Andreas Schwab <schwab@suse.de> Signed-off-by:
-
Corey Minyard authored
Correct an issue with the IPMI message layer taking a lock and calling lower layer driver. If an error occrues at the lower layer the lock can be taken again causing a deadlock. The lock is released before calling the lower layer. Signed-off-by:
David Griego <dgriego@mvista.com> Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Corey Minyard authored
Enable interrupts for a BT interface. There is a specific register that needs to be set up to enable interrupts that also must be modified to clear the irq. Also, don't reset the BMC on a BT interface. That's probably not a good idea as the BMC may be performing other important functions and a reset should only be a last resort. Also, that register is also used to enable/disable interrupts to the BT; modifying it may screw up the interrupts. Signed-off-by:
-
Corey Minyard authored
If there is an unexpected close, still allow the watchdog interface to be re-opened on the IPMI watchdog. Signed-off-by:
-
Corey Minyard authored
If the ACPI register bit width is zero (an invalid value) assume it is the default spacing. This avoids some coredumps on invalid data and makes some systems work that have broken ACPI data. Signed-off-by:
-
Corey Minyard authored
Ignore the bottom bit of the base address from the DMI data. It is supposed to be set to 1 if it is I/O space. Few systems do this, but this enables the ones that do set it to work properly. Signed-off-by:
-
aquynh@gmail.com authored
Documentation/dontdiff is a little messy. Here is a patch to sort the content of that file in alphabetical Signed-off-by:
Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by:
-
