- 04 Aug, 2009 5 commits
-
-
Hugh Dickins authored
ksm_run activates it; but if there's nothing on its list to look at, i.e. nobody has yet said madvise MADV_MERGEABLE, it's a shame to be clocking up system time and full_scans: ksmd_should_run added to check that too. And move the mutex_lock out around it: the new counts showed that when ksm_run is stopped, a little work often got done afterwards, because it had been read before taking the mutex. Signed-off-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by:
Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Hugh Dickins authored
which later become unshared by others: observation suggests they're not a significant proportion. But they are disadvantageous, and it is easier to break COW to replace them by swappable pages, than offer statistics to show that they don't matter; then we can stop worrying about them. Doing this in ksm_do_scan, they don't go through cmp_and_merge_page on this pass: give them a good chance of getting into the unstable tree on the next pass, or back into the stable, by computing checksum now. Signed-off-by:
-
Hugh Dickins authored
successful KSM is at sharing; but no clue to how much wasted work it's doing to get there. Add pages_unshared (count of unique pages waiting in the unstable tree, hoping to find a mate) and pages_volatile. pages_volatile is harder to define. It includes those pages changing too fast to get into the unstable tree, but also whatever other edge conditions prevent a page getting into the trees: a high value may deserve investigation. Don't try to calculate it from the various conditions: it's the total of rmap_items less those accounted for. Also show full_scans: the number of completed scans of everything registered in the mm list. The locking for all these counts is simply ksm_thread_mutex. Signed-off-by:
-
Hugh Dickins authored
to and removing a node from the stable tree: easy to understand. But the pages_sharing count was hard to follow, being adjusted in various places: increment and decrement it when adding to and removing from the stable tree. And the pages_sharing variable used to include the pages_shared, then those were subtracted when shown in the pages_sharing sysfs file: now keep it as an exclusive count of leaves hanging off the stable tree nodes, throughout. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Hugh Dickins authored
but when that follows, "kernel_pages_allocated" will be a very poor name for the sysfs file showing number of nodes in the stable tree: rename that to "pages_shared" throughout. But we already have a "pages_shared", counting those page slots sharing the shared pages: first rename that to... "pages_sharing". What will become of "max_kernel_pages" when the pages shared can be swapped? I guess it will just be removed, so keep that name. Signed-off-by:
-
- 23 Jul, 2009 4 commits
-
-
Izik Eidus authored
Signed-off-by:
-
Izik Eidus authored
Signed-off-by:
-
Hugh Dickins authored
without requiring any notification. But its stable tree does assume that when it finds a KSM page where it placed a KSM page, then it is the same KSM page that it placed there. mremap move could break that assumption: if an area containing a KSM page was unmapped, then an area containing a different KSM page was moved with mremap into the place of the original, before KSM's scan came around to notice. That could then poison a node of the stable tree, so that memcmps would "lie" and upset the ordering of the tree. Probably noone will ever need mremap move on a VM_MERGEABLE area; except that prohibiting it would make trouble for schemes in which we try making everything VM_MERGEABLE e.g. for testing: an mremap which normally works would then fail mysteriously. There's no need to go to any trouble, such as re-sorting KSM's list of rmap_items to match the new layout: simply unmerge the area to COW all its KSM pages before moving, but leave VM_MERGEABLE on so that they're remerged later. Signed-off-by:
Chris Wright <chrisw@redhat.com> Signed-off-by:
-
Izik Eidus authored
applications, in a way invisible to the applications that use it. Pages that are merged are marked as read-only, then COWed when any application tries to change them. Whereas fork() allows sharing anonymous pages between parent and child, ksm can share anonymous pages between unrelated processes. Ksm works by walking over the memory pages of the applications it scans, in order to find identical pages. It uses two sorted data structures, called the stable and unstable trees, to locate identical pages in an effective way. When ksm finds two identical pages, it marks them as readonly and merges them into a single page. After the pages have been marked as readonly and merged into one, Linux treats them as normal copy-on-write pages, copying to a fresh anonymous page if write access is required later. Ksm scans and merges anonymous pages only in those memory areas that have been registered with it by madvise(addr, length, MADV_MERGEABLE). The ksm scanner is controlled by sysfs files in /sys/kernel/mm/ksm/: max_kernel_pages - the maximum number of unswappable kernel pages which may be allocated by ksm (0 for unlimited). kernel_pages_allocated - how many ksm pages are currently allocated, sharing identical content between different processes (pages unswappable in this release). pages_shared - how many pages have been saved by sharing with ksm pages (kernel_pages_allocated being excluded from this count). pages_to_scan - how many pages ksm should scan before sleeping. sleep_millisecs - how many milliseconds ksm should sleep between scans. run - write 0 to disable ksm, read 0 while ksm is disabled (default), write 1 to run ksm, read 1 while ksm is running, write 2 to disable ksm and unmerge all its pages. Includes contributions by Andrea Arcangeli Chris Wright and Hugh Dickins. Signed-off-by:
-
- 24 Aug, 2009 2 commits
-
-
Hugh Dickins authored
/proc/kpageflags will probably like to do so too. Since KSM will only be substituting anonymous pages, statistics are best preserved by making a PageKsm page a special PageAnon page: one with no anon_vma. But KSM then needs its own page_add_ksm_rmap() - keep it in ksm.h near PageKsm; and do_wp_page() must COW them, unlike singly mapped PageAnons. Signed-off-by:
-
Hugh Dickins authored
just an inline atomic_inc of mapcount. 2.6.22 added CONFIG_DEBUG_VM out-of-line checks to it, which would need to be ever-so-slightly complicated to allow for the PageKsm() we're about to define. But I think these checks never caught anything. And if it's coding errors we're worried about, such checks should be in page_remove_rmap() too, not just when forking; whereas if it's pagetable corruption we're worried about, then they shouldn't be limited to CONFIG_DEBUG_VM. Oh, just revert page_dup_rmap() to an inline atomic_inc of mapcount. Signed-off-by:
-
- 13 Aug, 2009 1 commit
-
-
Hugh Dickins authored
better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by:
-
- 22 Aug, 2009 1 commit
-
-
Hugh Dickins authored
memory area for merging: we prefer now to use an madvise(2) interface. This patch just defines MADV_MERGEABLE (to tell KSM it may merge pages in this area found identical to pages in other mergeable areas) and MADV_UNMERGEABLE (to undo that). Most architectures use asm-generic, but alpha, mips, parisc, xtensa need their own definitions: included here for mmotm convenience, but we'll probably want to split this and feed pieces to arch maintainers. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by:
-
- 24 Aug, 2009 3 commits
-
-
Hugh Dickins authored
Move MADV_DOFORK code down from madvise_vma() to madvise_behavior(), so madvise_vma() can be a simple router, to madvise_behavior() by default. vma->vm_flags is an unsigned long so use the same type for new_flags. Add missing comment lines to describe MADV_DONTFORK and MADV_DOFORK. Signed-off-by:
-
Izik Eidus authored
between one or more processes. Unlike tradtional page sharing that is made at the allocation of the memory, ksm do it dynamicly after the memory was created. Memory is periodically scanned; identical pages are identified and merged. The sharing is made in a transparent way to the procsess that use it. Ksm is highly important for hypervisors (kvm), where in production enviorments there might be many copys of the same data data among the host memory. This kind of data can be: similar kernels, librarys, cache, and so on. Even that ksm was wrote for kvm, any userspace application that want to use it to share its data can try it. Ksm may be useful for any application that might have similar (page aligment) data strctures among the memory, ksm will find this data merge it to one copy, and even if it will be changed and thereforew copy on writed, ksm will merge it again as soon as it will be identical again. Another reason to consider using ksm is the fact that it might simplify alot the userspace code of application that want to use shared private data, instead that the application will mange shared area, ksm will do this for the application, and even write to this data will be allowed without any synchinization acts from the application. Ksm was designed to be a loadable module that doesn't change the VM code of linux. This patch: The set_pte_at_notify() macro allows setting a pte in the shadow page table directly, instead of flushing the shadow page table entry and then getting vmexit to set it. It uses a new change_pte() callback to do so. set_pte_at_notify() is an optimization for kvm, and other users of mmu_notifiers, for COW pages. It is useful for kvm when ksm is used, because it allows kvm not to have to receive vmexit and only then map the ksm page into the shadow page table, but instead map it directly at the same time as Linux maps the page into the host page table. Users of mmu_notifiers who don't implement new mmu_notifier_change_pte() callback will just receive the mmu_notifier_invalidate_page() callback. Signed-off-by:
-
Johannes Weiner authored
looking at our page->flags anymore. It is thus safe to make the test-and-clear non-atomic and thereby removing an unnecessary and expensive operation from a hotpath. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Christoph Lameter <cl@linux-foundation.org> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
- 21 Jul, 2009 1 commit
-
-
Figo.zhang authored
Signed-off-by:
Figo.zhang <figo1802@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 24 Aug, 2009 7 commits
-
-
Akinobu Mita authored
address cannot represent a highmem page. get_zeroed_page() already has such a debug checking. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
KOSAKI Motohiro authored
touched by shrink_active_list(). IOW the prefetch in move_active_pages_to_lru() don't populate any cache. it's pointless. This patch remove it. Signed-off-by:
-
KOSAKI Motohiro authored
don't need to re-evaluate it. Signed-off-by:
-
KOSAKI Motohiro authored
ClearPageActive() doesn't need irq disabling. Then, this patch move it into shrink_active_list(). Signed-off-by:
-
Minchan Kim authored
But it doesn't avoid it for lumpy reclaim. It shuffles lru list unnecessary so that it is pointless. [akpm@linux-foundation.org: cleanup] Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Wu Fengguang authored
- to estimate max reclaimable pages in determine_dirtyable_memory() - to calculate the slab scan ratio When swap is full or not present, the anon lru lists are not reclaimable and also won't be scanned. So the anon pages shall not be counted in both usage scenarios. Also rename to _reclaimable_pages: now they are counting the possibly reclaimable lru pages. It can greatly (and correctly) increase the slab scan rate under high memory pressure (when most file pages have been reclaimed and swap is full/absent), thus reduce false OOM kills. Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Cc: David Howells <dhowells@redhat.com> Cc: "Li, Ming Chun" <macli@brc.ubc.ca> Signed-off-by:
-
Jan Kara authored
Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 16 Jul, 2009 1 commit
-
-
KOSAKI Motohiro authored
Signed-off-by:
-
- 24 Aug, 2009 1 commit
-
-
Rik van Riel authored
of the pages to be taken off the LRU. One result of this is that the next process in the page reclaim code thinks there are no reclaimable pages left and triggers an out of memory kill. One solution to this problem is to never let so many processes into the page reclaim path that the entire LRU is emptied. Limiting the system to only having half of each inactive list isolated for reclaim should be safe. Signed-off-by:
-
- 16 Jul, 2009 1 commit
-
-
KOSAKI Motohiro authored
Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
-
- 24 Aug, 2009 8 commits
-
-
KOSAKI Motohiro authored
can isolate a large number of pages from the LRU. /proc/meminfo and the output generated for an OOM do not show how many pages were isolated. This has been observed during process fork bomb testing (mstctl11 in LTP). This patch shows the information about isolated pages. Reproduced via: ----------------------- % ./hackbench 140 process 1000 => OOM occur active_anon:146 inactive_anon:0 isolated_anon:49245 active_file:79 inactive_file:18 isolated_file:113 unevictable:0 dirty:0 writeback:0 unstable:0 buffer:39 free:370 slab_reclaimable:309 slab_unreclaimable:5492 mapped:53 shmem:15 pagetables:28140 bounce:0 Signed-off-by:
-
KOSAKI Motohiro authored
In past days, shrink_inactive_list() handled it properly. But commit fb8d14e1 (three years ago commit!) breaked it. current shrink_inactive_list() always call shrink_page_list() although isolate_pages() return 0. This patch restore proper return value check. Requirements: o "nr_taken == 0" condition should stay before calling shrink_page_list(). o "nr_taken == 0" condition should stay after nr_scan related statistics modification. Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
KOSAKI Motohiro authored
reviewing. This patch separates it. Signed-off-by:
-
David Rientjes authored
When this happens, alloc_flags needs to be updated accordingly to set ALLOC_NO_WATERMARKS so the subsequent allocation attempt may use memory reserves as the result of its thread having TIF_MEMDIE set if the allocation is not __GFP_NOMEMALLOC. Acked-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
KOSAKI Motohiro authored
Generally a large amuont of Shmem/Tmpfs pages tend to create a memory shortage problem. We often use the following calculation to determine the amount of shmem pages: shmem = NR_ACTIVE_ANON + NR_INACTIVE_ANON - NR_ANON_PAGES however the expression does not consider isolated and mlocked pages. This patch adds explicit accounting for pages used by shmem and tmpfs. Signed-off-by:
-
KOSAKI Motohiro authored
cause OOM conditions. However, we do not display the amount of memory consumed by stacks. Add code to display the amount of memory used for stacks in /proc/meminfo. Signed-off-by:
-
KOSAKI Motohiro authored
like page cache pages when looking at OOM log output. Therefore show_free_areas() should also display buffer cache statistics. Signed-off-by:
-
KOSAKI Motohiro authored
patch includes additional counters in the display to allow easier debugging. This may be especially useful if an OOM is due to running out of DMA memory. Signed-off-by:
-
- 14 Jul, 2009 1 commit
-
-
Andi Kleen authored
Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
- 24 Aug, 2009 2 commits
-
-
KOSAKI Motohiro authored
reclaimable pages. So the reclaimable slab and unreclaimable slab fields should not be combined for display. Signed-off-by:
-
KOSAKI Motohiro authored
Clean this up. Signed-off-by:
-
- 17 Jul, 2009 1 commit
-
-
Lee Schermerhorn authored
node on failure to allocate a huge page, potentially filling nodes with huge-pages. I asked about this on linux-mm and linux-numa, cc'ing the usual huge page suspects. Mel Gorman responded: I strongly suspect that the same node being used until allocation failure instead of round-robin is an oversight and not deliberate at all. It appears to be a side-effect of a fix made way back in commit 63b4613c ["hugetlb: fix hugepage allocation with memoryless nodes"]. Prior to that patch it looked like allocations would always round-robin even when allocation was successful. This patch--factored out of my "hugetlb mempolicy" series--moves the advance of the hstate next node from which to allocate up before the test for success of the attempted allocation. Note that alloc_bootmem_huge_page() is only used for order > MAX_ORDER huge pages. I'll post a separate patch for mainline/stable, as the above mentioned "balance freeing" series renamed the next node to alloc function. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Reviewed-by:
Andy Whitcroft <apw@canonical.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
- 29 Jun, 2009 1 commit
-
-
Lee Schermerhorn authored
doucmentation to mention the balancing of huge pages across nodes when allocating and freeing. Signed-off-by:
-
