- 27 Jul, 2009 23 commits
-
-
Helmut Schaa authored
Introduce a new scan state "decision" which is entered after every completed scan operation and decides about the next steps. At first the decision is in any case to scan the next channel. This shouldn't introduce any functional changes. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Instead of queueing the scan work again without delay just process the next state immediately. Signed-off-by:
-
Helmut Schaa authored
Move the processing of each scan state into its own functions for better readability. This patch does not introduce functional changes. Signed-off-by:
-
Sujith authored
Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith authored
Cleanup aggregation start/stop function interfaces. Signed-off-by:
-
Sujith authored
These can be obtained from mac80211. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
Update filename for debug information. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Vivek Natarajan authored
Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
TH gets 5 GHz. Cc: David Quan <david.quan@atheros.com> Cc: Michael Green <michael.green@atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Lars Ericsson authored
rt2x00dev->default_ant should be initialized once by the driver, and should not be changed afterwards. Because rt2x00lib_config_antenna() was using a reference to the struct antenna_setup it actually had the oppurtunity to change the default antenna setting and it actually did that during the validation. Instead of passing a pointer to antenna_setup the entire structure should be copied. Signed-off-by:
Lars Ericsson <Lars_Ericsson@telia.com> Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Johannes Berg authored
This finally opens up the ability to put mac80211 devices into different network namespaces. As long as you don't have sysfs, that is. Signed-off-by:
-
Johannes Berg authored
In order to make cfg80211/nl80211 aware of network namespaces, we have to do the following things: * del_virtual_intf method takes an interface index rather than a netdev pointer - simply change this * nl80211 uses init_net a lot, it changes to use the sender's network namespace * scan requests use the interface index, hold a netdev pointer and reference instead * we want a wiphy and its associated virtual interfaces to be in one netns together, so - we need to be able to change ns for a given interface, so export dev_change_net_namespace() - for each virtual interface set the NETIF_F_NETNS_LOCAL flag, and clear that flag only when the wiphy changes ns, to disallow breaking this invariant * when a network namespace goes away, we need to reparent the wiphy to init_net * cfg80211 users that support creating virtual interfaces must create them in the wiphy's namespace, currently this affects only mac80211 The end result is that you can now switch an entire wiphy into a different network namespace with the new command iw phy#<idx> set netns <pid> and all virtual interfaces will follow (or the operation fails). Signed-off-by: -
Johannes Berg authored
There are still two places in mac80211 that hardcode the initial net namespace (init_net). One of them is mandated by cfg80211 and will be removed by a separate patch, the other one is used for finding the network device of a pending packet via its ifindex. Remove the latter use by keeping track of the device pointer itself, via the vif pointer, and avoid it going stale by dropping pending frames for a given interface when the interface is removed. To keep track of the vif pointer for the correct interface, change the info->control.vif pointer's internal use to always be the correct vif, and only move it to the vif the driver expects (or NULL for monitor interfaces and injected packets) right before giving the packet to the driver. Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Karsten Keil <keil@b1-systems.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
net/phonet/pn_dev.c: In function `phonet_device_get': net/phonet/pn_dev.c:99: warning: 'dev' might be used uninitialized in this function Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Eric Dumazet authored
[PATCH net-next-2.6] bnx2: Update vlan_features In order to get full use of some advanced features of BNX2, we now need to fill dev->vlan_features. Patch successfully tested with vlan devices built on top of bonding. (bond0 : one bnx2 slave, one tg3 slave (not yet vlan_features enabled) Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Tomas Winkler authored
1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Sridhar Samudrala authored
This helps avoid error messages with ethtool -k on devices that don't provide device specific routines. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> ------------------------------------------------------------------ Signed-off-by:
-
Eric Dumazet authored
Patrick said : "vlan_features doesn't need to be updated, the resulting dev->features of the VLAN device is computed as the intersection of dev->features and dev->vlan_features." Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Johannes Berg authored
We've had %pM for long enough now, time to deprecate print_mac() and remove the __maybe_unused attribute from DECLARE_MAC_BUF so that variables declared with that can be found and removed. Otherwise people are putting in new users of print_mac(). Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
- 26 Jul, 2009 16 commits
-
-
David S. Miller authored
As reported by Oliver Hartkopp: net/phonet/pn_dev.c: In function ‘phonet_init_net’: net/phonet/pn_dev.c:221: error: implicit declaration of function ‘proc_net_fops_create’ net/phonet/pn_dev.c: In function ‘phonet_exit_net’: net/phonet/pn_dev.c:242: error: implicit declaration of function ‘proc_net_remove’ Signed-off-by: -
-
-
Alexander Duyck authored
This change resolves some warnings seen with DMA debugging enabled in which we were mapping skb->data with size + NET_IP_ALIGN and unmapping it with just size. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
The igb driver is currently initializing the mailbox function pointers after the phy. This causes issues as the phy init will return from the function early if there is no phy present. To resolve this I have moved the function pointer init to a location prior to the phy initialization so that serdes based adapters can also make use of SR-IOV. Signed-off-by:
-
Alexander Duyck authored
This patch cleans up the flow control configuration for igb to make it a bit more readable in regards to what the requested and current modes are. This should help with the maintainability of the current igb driver in regards to flow control. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that we use buffer_info->dma instead of shinfo->nr_frags to determine if we need to unmap a received skb. By doing this we can avoid a cache miss on small packets since the buffer_info structure should already be prefetched. Signed-off-by:
-
Alexander Duyck authored
This patch adds support for a new 82576 mezzanine adapter. Signed-off-by:
-
Alexander Duyck authored
There is a switch statement in igb_set_wol that defaults to break and doesn't actually do anything. As such it should be removed. Signed-off-by:
-
Alexander Duyck authored
This update cleans up the receive address register initialization. The main purpose of this is to clean out some redundancy that was introduced due to having multiple ways of setting the receive address registers. Instead of having a specialized function to set one register and one to set all of them it makes more sense to just go through the list calling the function that is needed to set the individual registers. Signed-off-by:
-
Alexander Duyck authored
This patch moves all of the multicast addresses out of the free Receive address registers and instead programs them all into the multicast table array. As a result the multicast filtering may not be as precise, but it also greatly reduces the overhead for multicast addresses. Signed-off-by:
-
Alexander Duyck authored
The 82575 and 82576 hardware can both experience data corruption issues if a pci-e completion arrives after the timeout value. In order to avoid this we need to increase the timeout value while pci-e master is disabled. Signed-off-by:
-
Alexander Duyck authored
The igb driver was overwritting the LED settings that were configured via EEPROM. This is not correct behavior as the LED settings are meant to be configured by EEPROM and not changed. This change removes the code that was setting the LED behavior on the interface. Signed-off-by:
-
Alexander Duyck authored
Since igb_configure_pcs_link always returns 0 there isn't really much point to checking for the result so it is best just to change this to a void so we can properly ignore the return result. Signed-off-by:
-
Alexander Duyck authored
There was a serdes power down workaround that was originally added for 82576 fiber. However it has also been found that this workaround is needed for serdes connections as well. In addition it is also needed for 82575 serdes so we we need to remove the checks restricting it to 82576. Signed-off-by:
-
Alexander Duyck authored
The current igb driver only supports copper and serdes. The fiber media type is a holdover from earlier NICs as the current nics supported by igb all use serdes when communicating over a fiber connection. As a result we can remove media type fiber without losing any functionality. Signed-off-by:
-
- 25 Jul, 2009 1 commit
-
-
Karsten Keil authored
In the PCI probe function struct pci_device_id points to the matched entry of the ID table, but for devices which are matched with PCI_ANY_ID sub IDs we want display the IDs of the device itself. Signed-off-by:
-
