- 12 Sep, 2009 6 commits
-
-
Avi Kivity authored
They're just copies of vcpu->run, which is readily accessible. Signed-off-by:Avi Kivity <avi@redhat.com>
-
Mohammed Gamal authored
Report unhandled instructions in the syslog on emulation failure Signed-off-by:
Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by:
-
Mohammed Gamal authored
Introduces a new decode option "No64", which is used for instructions that are invalid in long mode. Signed-off-by:
-
Mohammed Gamal authored
[avi: avoid buffer overflow] Signed-off-by:
-
Avi Kivity authored
Preemption notifiers will do that for us automatically. Signed-off-by: -
Marcelo Tosatti authored
Add myself to KVM MAINTAINERS entry. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
- 10 Sep, 2009 34 commits
-
-
Julia Lawall authored
This code is not executed before file has been initialized to the result of calling eventfd_fget. This function returns an ERR_PTR value in an error case instead of NULL. Thus the test that file is not NULL is always true. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = eventfd_fget(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Heiko Carstens authored
CC arch/s390/kvm/../../../virt/kvm/kvm_main.o arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function '__kvm_set_memory_region': arch/s390/kvm/../../../virt/kvm/kvm_main.c:485: warning: unused variable 'j' arch/s390/kvm/../../../virt/kvm/kvm_main.c:484: warning: unused variable 'lpages' arch/s390/kvm/../../../virt/kvm/kvm_main.c:483: warning: unused variable 'ugfn' Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Avi Kivity authored
Debug registers may only be accessed from cpl 0. Unfortunately, vmx will code to emulate the instruction even though it was issued from guest userspace, possibly leading to an unexpected trap later. Cc: stable@kernel.org Signed-off-by:
-
Gleb Natapov authored
Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
kvm_mmu_slot_remove_write_access already calls it. Signed-off-by:
-
Gleb Natapov authored
No need to call it before each kvm_(set|get)_msr_common() Signed-off-by:
-
Avi Kivity authored
Only reload debug register 6 if we're running with the guest's debug registers. Saves around 150 cycles from the guest lightweight exit path. dr6 contains a couple of bits that are updated on #DB, so intercept that unconditionally and update those bits then. Signed-off-by:
-
Avi Kivity authored
Instead of saving the debug registers from the processor to a kvm data structure, rely in the debug registers stored in the thread structure. This allows us not to save dr6 and dr7. Reduces lightweight vmexit cost by 350 cycles, or 11 percent. Signed-off-by: -
Marcelo Tosatti authored
Commit b8bcfe99 made paravirt pte updates synchronous in interrupt context. Unfortunately the KVM pv mmu code caches the lazy/nonlazy mode internally, so a pte update from interrupt context during a lazy mmu operation can be batched while it should be performed synchronously. https://bugzilla.redhat.com/show_bug.cgi?id=518022 Drop the internal mode variable and use paravirt_get_lazy_mode(), which returns the correct state. Cc: stable@kernel.org Signed-off-by:
-
Gleb Natapov authored
This bug was introduced by b4a2f5e7. Cc: stable@kernel.org Signed-off-by:
-
Glauber Costa authored
The use of __pa() to calculate the address of a C-visible symbol is wrong, and can lead to unpredictable results. See arch/x86/include/asm/page.h for details. It should be replaced with __pa_symbol(), that does the correct math here, by taking relocations into account. This ensures the correct wallclock data structure physical address is passed to the hypervisor. Cc: stable@kernel.org Signed-off-by:
Glauber Costa <glommer@redhat.com> Signed-off-by:
-
Gleb Natapov authored
Don't call adjust_vmx_controls() two times for the same control. It restores options that were dropped earlier. This loses us the cr8 exit control, which causes a massive performance regression Windows x64. Cc: stable@kernel.org Signed-off-by:
-
Avi Kivity authored
We know no pages are protected, so we can short-circuit the whole thing (including fairly nasty guest memory accesses). Signed-off-by: -
Avi Kivity authored
Signed-off-by: -
Avi Kivity authored
update_cr8_intercept() can be triggered from userspace while there is no apic present. Signed-off-by: -
Sheng Yang authored
QNX update WP bit when paging enabled, which is not covered yet. This one fix QNX boot with EPT. Cc: stable@kernel.org Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
-
Mikhail Ershov authored
Segment descriptors tables can be placed on two non-contiguous pages. This patch makes reading segment descriptors by linear address. Signed-off-by:
Mikhail Ershov <Mike.Ershov@gmail.com> Signed-off-by:
-
Mohammed Gamal authored
Add missing decoder flags for adc and sbb instructions (opcodes 0x14-0x15, 0x1c-0x1d) Signed-off-by:
-
Avi Kivity authored
Signed-off-by: -
Avi Kivity authored
Signed-off-by: -
Michael S. Tsirkin authored
kvm_para.h contains userspace interface and so should be exported. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Amit Shah authored
The KVM list moved to vger.kernel.org last year Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Avi Kivity authored
We're in arch/x86, what could we possibly be emulating? Signed-off-by: -
Anthony Liguori authored
According to 16.2.5 in the SDM, eflags.vm in the tss is consulted before loading and new segments. If eflags.vm == 1, then the segments are treated as 16-bit segments. The LDTR and TR are not normally available in vm86 mode so if they happen to somehow get loaded, they need to be treated as 32-bit segments. This fixes an invalid vmentry failure in a custom OS that was happening after a task switch into vm8086 mode. Since the segments were being mistakenly treated as 32-bit, we loaded garbage state. Signed-off-by:
Anthony Liguori <aliguori@us.ibm.com> Signed-off-by:
-
Avi Kivity authored
We set rflags.vm86 when virtualizing real mode to do through vm8086 mode; so we need to take it out again when reading rflags. Signed-off-by: -
Avi Kivity authored
The symbol only controls irq routing, not MSI-X. Signed-off-by: -
Avi Kivity authored
It is no longer possible to reproduce the problem any more, so presumably it has been fixed. Signed-off-by: -
Gleb Natapov authored
Since on vcpu entry we do it only if apic is enabled we should do it when TPR is changed while apic is disabled. This happens when windows resets HW without setting TPR to zero. Signed-off-by:
-
Joerg Roedel authored
Nested SVM is (in my experience) stable enough to be enabled by default. So omit the requirement to pass a module parameter. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Joerg Roedel authored
Not checking for this flag breaks any nested hypervisor that does not set VINTR. So fix it with this patch. Signed-off-by:
-
Joerg Roedel authored
This patch removes one indentation level from nested_svm_intr and makes the logic more readable. Signed-off-by:
-
Joerg Roedel authored
This check is not necessary. We have to sync the vcpu->arch.cr2 always back to the VMCB. This patch remove the is_nested check. Signed-off-by:
-
Joerg Roedel authored
This patch moves the handling for special nested vmexits like #pf to a separate function. This makes the kvm_override parameter obsolete and makes the code more readable. Signed-off-by:
-
Joerg Roedel authored
If nested svm fails to load the msrpm the vmrun succeeds with the old msrpm which is not correct. This patch changes the logic to roll back to host mode in case the msrpm cannot be loaded. Signed-off-by:
-
