Skip to content

L
linux-davinci
Switch branch/tag
  1. 16 Mar, 2009 8 commits
    • Ilpo Järvinen's avatar
      tcp: cache result of earlier divides when mss-aligning things · 2a3a041c
      Ilpo Järvinen authored 
      The results is very unlikely change every so often so we
hardly need to divide again after doing that once for a
connection. Yet, if divide still becomes necessary we
detect that and do the right thing and again settle for
non-divide state. Takes the u16 space which was previously
taken by the plain xmit_size_goal.

This should take care part of the tso vs non-tso difference
we found earlier.
Signed-off-by: default avatarIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a3a041c
    • Ilpo Järvinen's avatar
      tcp: simplify tcp_current_mss · 0c54b85f
      Ilpo Järvinen authored 
      There's very little need for most of the callsites to get
tp->xmit_goal_size updated. That will cost us divide as is,
so slice the function in two. Also, the only users of the
tp->xmit_goal_size are directly behind tcp_current_mss(),
so there's no need to store that variable into tcp_sock
at all! The drop of xmit_goal_size currently leaves 16-bit
hole and some reorganization would again be necessary to
change that (but I'm aiming to fill that hole with u16
xmit_goal_size_segs to cache the results of the remaining
divide to get that tso on regression).

Bring xmit_goal_size parts into tcp.c
Signed-off-by: default avatarIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c54b85f
    • Ilpo Järvinen's avatar
      tcp: don't check mtu probe completion in the loop · 72211e90
      Ilpo Järvinen authored 
      It seems that no variables clash such that we couldn't do
the check just once later on. Therefore move it.

Also kill dead obvious comment, dead argument and add
unlikely since this mtu probe does not happen too often.
Signed-off-by: default avatarIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72211e90
    • Ilpo Järvinen's avatar
      tcp: consolidate paws check · c887e6d2
      Ilpo Järvinen authored 
      Wow, it was quite tricky to merge that stream of negations
but I think I finally got it right:

check & replace_ts_recent:
(s32)(rcv_tsval - ts_recent) >= 0                  => 0
(s32)(ts_recent - rcv_tsval) <= 0                  => 0

discard:
(s32)(ts_recent - rcv_tsval)  > TCP_PAWS_WINDOW    => 1
(s32)(ts_recent - rcv_tsval) <= TCP_PAWS_WINDOW    => 0

I toggled the return values of tcp_paws_check around since
the old encoding added yet-another negation making tracking
of truth-values really complicated.
Signed-off-by: default avatarIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c887e6d2
    • Ilpo Järvinen's avatar
      tcp: kill dead end_seq variable in clean_rtx_queue · c43d558a
      Ilpo Järvinen authored 
      I've already forgotten what for this was necessary, anyway
it's no longer used (if it ever was).
Signed-off-by: default avatarIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c43d558a
    • Ilpo Järvinen's avatar
      tcp: remove pointless .dsack/.num_sacks code · 5861f8e5
      Ilpo Järvinen authored 
      In the pure assignment case, the earlier zeroing is
still in effect.

David S. Miller raised concerns if the ifs are there to avoid
dirtying cachelines. I came to these conclusions:

> We'll be dirty it anyway (now that I check), the first "real" statement
> in tcp_rcv_established is:
>
>       tp->rx_opt.saw_tstamp = 0;
>
> ...that'll land on the same dword. :-/
>
> I suppose the blocks are there just because they had more complexity
> inside when they had to calculate the eff_sacks too (maybe it would
> have been better to just remove them in that drop-patch so you would
> have had less head-ache :-)).
Signed-off-by: default avatarIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5861f8e5
    • Jarek Poplawski's avatar
      pkt_sched: Change misleading code in class delete. · 7cd0a638
      Jarek Poplawski authored 
      While looking for a possible reason of bugzilla report on HTB oops:
http://bugzilla.kernel.org/show_bug.cgi?id=12858
I found the code in htb_delete calling htb_destroy_class on zero
refcount is very misleading: it can suggest this is a common path, and
destroy is called under sch_tree_lock. Actually, this can never happen
like this because before deletion cops->get() is done, and after
delete a class is still used by tclass_notify. The class destroy is
always called from cops->put(), so without sch_tree_lock.

This doesn't mean much now (since 2.6.27) because all vulnerable calls
were moved from htb_destroy_class to htb_delete, but there was a bug
in older kernels. The same change is done for other classful scheds,
which, it seems, didn't have similar locking problems here.
Reported-by: default avatarm0sia <m0sia@m0sia.ru>
Signed-off-by: default avatarJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7cd0a638
    • Eric Dumazet's avatar
      net: reorder fields of struct socket · 8bdd663a
      Eric Dumazet authored 
      On x86_64, its rather unfortunate that "wait_queue_head_t wait"
field of "struct socket" spans two cache lines (assuming a 64
bytes cache line in current cpus)

offsetof(struct socket, wait)=0x30
sizeof(wait_queue_head_t)=0x18

This might explain why Kenny Chang noticed that his multicast workload
was performing bad with 64 bit kernels, since more cache lines ping pongs
were involved.

This litle patch moves "wait" field next "fasync_list" so that both
fields share a single cache line, to speedup sock_def_readable()
Signed-off-by: default avatarEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8bdd663a
  3. 14 Mar, 2009 25 commits
  5. 13 Mar, 2009 7 commits
    • Gabriele Paoloni's avatar
      ppp: ppp_mp_explode() redesign · 9c705260
      Gabriele Paoloni authored 
      I found the PPP subsystem to not work properly when connecting channels
with different speeds to the same bundle.

Problem Description:

As the "ppp_mp_explode" function fragments the sk_buff buffer evenly
among the PPP channels that are connected to a certain PPP unit to
make up a bundle, if we are transmitting using an upper layer protocol
that requires an Ack before sending the next packet (like TCP/IP for
example), we will have a bandwidth bottleneck on the slowest channel
of the bundle.

Let's clarify by an example. Let's consider a scenario where we have
two PPP links making up a bundle: a slow link (10KB/sec) and a fast
link (1000KB/sec) working at the best (full bandwidth). On the top we
have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the
PPP subsystem. The "ppp_mp_explode" function will divide the buffer in
two fragments of 500B each (we are neglecting all the headers, crc,
flags etc?.). Before the TCP/IP stack sends out the next buffer, it
will have to wait for the ACK response from the remote peer, so it
will have to wait for both fragments to have been sent over the two
PPP links, received by the remote peer and reconstructed. The
resulting behaviour is that, rather than having a bundle working
@1010KB/sec (the sum of the channels bandwidths), we'll have a bundle
working @20KB/sec (the double of the slowest channels bandwidth).


Problem Solution:

The problem has been solved by redesigning the "ppp_mp_explode"
function in such a way to make it split the sk_buff buffer according
to the speeds of the underlying PPP channels (the speeds of the serial
interfaces respectively attached to the PPP channels). Referring to
the above example, the redesigned "ppp_mp_explode" function will now
divide the 1000 Bytes buffer into two fragments whose sizes are set
according to the speeds of the channels where they are going to be
sent on (e.g .  10 Byets on 10KB/sec channel and 990 Bytes on
1000KB/sec channel).  The reworked function grants the same
performances of the original one in optimal working conditions (i.e. a
bundle made up of PPP links all working at the same speed), while
greatly improving performances on the bundles made up of channels
working at different speeds.
Signed-off-by: default avatarGabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9c705260
    • Roel Kluin's avatar
      tcp: '< 0' test on unsigned · a2025b8b
      Roel Kluin authored 
      promote 'cnt' to size_t, to match 'len'.
Signed-off-by: default avatarRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2025b8b
    • Roel Kluin's avatar
      x25: '< 0' and '>= 0' test on unsigned · 8db09f26
      Roel Kluin authored 
      skb->len is an unsigned int, so the test in x25_rx_call_request() always
evaluates to true.

len in x25_sendmsg() is unsigned as well. so -ERRORS returned by x25_output()
are not noticed.
Signed-off-by: default avatarRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8db09f26
    • Denys Fedoryshchenko's avatar
      ipv4: arp announce, arp_proxy and windows ip conflict verification · 73ce7b01
      Denys Fedoryshchenko authored 
      Windows (XP at least) hosts on boot, with configured static ip, performing 
address conflict detection, which is defined in RFC3927.
Here is quote of important information:

"
An ARP announcement is identical to the ARP Probe described above, 
except    that now the sender and target IP addresses are both set 
to the host's newly selected IPv4 address. 
"

But it same time this goes wrong with RFC5227.
"
The 'sender IP address' field MUST be set to all zeroes; this is to avoid
polluting ARP caches in other hosts on the same link in the case
where the address turns out to be already in use by another host.
"

When ARP proxy configured, it must not answer to both cases, because 
it is address conflict verification in any case. For Windows it is just 
causing to detect false "ip conflict". Already there is code for RFC5227, so 
just trivially we just check also if source ip == target ip.
Signed-off-by: default avatarDenys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      73ce7b01
    • Tomasz Lemiech's avatar
      tulip: Fix for MTU problems with 802.1q tagged frames · 1f8ae0a2
      Tomasz Lemiech authored 
      The original patch was submitted last year but wasn't discussed or applied
because of missing maintainer's CCs. I only fixed some formatting errors,
but as I saw tulip is very badly formatted and needs further work.

Original description:
This patch fixes MTU problem, which occurs when using 802.1q VLANs. We
should allow receiving frames of up to 1518 bytes in length, instead of
1514.

Based on patch written by Ben McKeegan for 2.4.x kernels. It is archived
at http://www.candelatech.com/~greear/vlan/howto.html#tulip
I've adjusted a few things to make it apply on 2.6.x kernels.

Tested on D-Link DFE-570TX quad-fastethernet card.
Signed-off-by: default avatarTomasz Lemiech <szpajder@staszic.waw.pl>
Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
Signed-off-by: default avatarBen McKeegan <ben@netservers.co.uk>
Acked-by: default avatarGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1f8ae0a2
    • Marcin Slusarz's avatar
      phylib: convert state_queue work to delayed_work · a390d1f3
      Marcin Slusarz authored 
      It closes a race in phy_stop_machine when reprogramming of phy_timer
(from phy_state_machine) happens between del_timer_sync and cancel_work_sync.

Without this change it could lead to crash if phy_device would be freed after
phy_stop_machine (timer would fire and schedule freed work).
Signed-off-by: default avatarMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a390d1f3
    • Pavel Roskin's avatar
      bmac: remove unused variable bp in bmac_misc_intr() · 34cd347c
      Pavel Roskin authored 
      From: Pavel Roskin <proski@gnu.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34cd347c