The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls
is a string that contains the hostname or IP address of the remote peer
to be notified when this host has rebooted.  The sm-notify command uses
this identifier to contact the peer when we reboot, so it must be
either a well-qualified DNS hostname or a presentation format IP
address string.

When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM
provides a presentation format IP address in the "mon_name" argument.
Otherwise, the "caller_name" argument from NLM requests is used,
which is usually just the DNS hostname of the peer.

To support IPv6 addresses for the mon_name argument, we use the
nsm_handle's address eye-catcher, which already contains an appropriate
presentation format address string.  Using the eye-catcher string
obviates the need to use a large buffer on the stack to form the
presentation address string for the upcall.

This patch also addresses a subtle bug.

An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the
same peer are required to use the same value for the "mon_name"
argument.  Otherwise, rpc.statd's NSMPROC_UNMON processing cannot
locate the database entry for that peer and remove it.

If the setting of nsm_use_hostnames is changed between the time the
kernel sends an NSMPROC_MON request and the time it sends the
NSMPROC_UNMON request for the same peer, the "mon_name" argument for
these two requests may not be the same.  This is because the value of
"mon_name" is currently chosen at the moment the call is made based on
the setting of nsm_use_hostnames

To ensure both requests pass identical contents in the "mon_name"
argument, we now select which string to use for the argument in the
nsm_monitor() function.  A pointer to this string is saved in the
nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall.

NB: There are other potential problems, such as how nlm_host_rebooted()
might behave if nsm_use_hostnames were changed while hosts are still
being monitored.  This patch does not attempt to address those
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Clean up: I'm about to add another "char *" field to the nsm_handle
structure.  The sm_name field uses an older style of declaring a
"char *" field.  If I match that style for the new field, checkpatch.pl
will complain.

So, fix the sm_name field to use the new style.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Clean up: make the printk(KERN_DEBUG) in nsm_mon_unmon() a dprintk,
and add another dprintk to note if creating an RPC client for the
upcall failed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Clean up: Use a C99 structure initializer instead of open-coding the
initialization of nsm_args.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Clean up: introduce a helper function to generate IPv4 addresses using
the same style as the IPv6 helper function we just added.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Scope ID support is needed since the kernel's NSM implementation is
about to use these displayed addresses as a mon_name in some cases.

When nsm_use_hostnames is zero, without scope ID support NSM will fail
to handle peers that contact us via a link-local address.  Link-local
addresses do not work without an interface ID, which is stored in the
sockaddr's sin6_scope_id field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

AF_UNSPEC support is no longer needed in nlm_display_address() now
that a presentation address is no longer generated for the h_srcaddr
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

The h_name field in struct nlm_host is a just copy of
h_nsmhandle->sm_name.  Likewise, the contents of the h_addrbuf field
should be identical to the sm_addrbuf field.

The h_srcaddrbuf field is used only in one place for debugging.  We can
live without this until we get %pI formatting for printk().

Currently these buffers are 48 bytes, but we need to support scope IDs
in IPv6 presentation addresses, which means making the buffers even
larger.  Instead, let's find ways to eliminate them to save space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Clean up: I'm about to add another "char *" field to the nlm_host
structure.  The h_name field, for example, uses an older style of
declaring a "char *" field.  If I match that style for the new field,
checkpatch.pl will complain.

So, fix pointer fields to use the new style.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

The default method for calculating the number of connections allowed
per RPC service arbitrarily limits single-threaded services to 80
connections. This is too low for services like lockd and artificially
limits the number of TCP clients that it can support.

Have lockd set a default sv_maxconn value to 1024 (which is the typical
default value for RLIMIT_NOFILE. Also add a module parameter to allow an
admin to set this to an arbitrary value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

svc_check_conn_limits() attempts to prevent denial of service attacks
by having the service close old connections once it reaches a
threshold. This threshold is based on the number of threads in the
service:

	(serv->sv_nrthreads + 3) * 20

Once we reach this, we drop the oldest connections and a printk pops
to warn the admin that they should increase the number of threads.

Increasing the number of threads isn't an option however for services
like lockd. We don't want to eliminate this check entirely for such
services but we need some way to increase this limit.

This patch adds a sv_maxconn field to the svc_serv struct. When it's
set to 0, we use the current method to calculate the max number of
connections. RPC services can then set this on an as-needed basis.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Descriptions taken from mountd code (in nfs-utils/utils/mountd/cache.c).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

cksum.data is not freed up in one error case. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Minor cleanup/rewrite of find_stateid. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm snapshot: extend exception store functions
  dm snapshot: split out exception store implementations
  dm snapshot: rename struct exception_store
  dm snapshot: separate out exception store interface
  dm mpath: move trigger_event to system workqueue
  dm: add name and uuid to sysfs
  dm table: rework reference counting
  dm: support barriers on simple devices
  dm request: extend target interface
  dm request: add caches
  dm ioctl: allow dm_copy_name_and_uuid to return only one field
  dm log: ensure log bitmap fits on log device
  dm log: move region_size validation
  dm log: avoid reinitialising io_req on every operation
  dm: consolidate target deregistration error handling
  dm raid1: fix error count
  dm log: fix dm_io_client leak on error paths
  dm snapshot: change yield to msleep
  dm table: drop reference at unbind

Supply dm_add_exception as a callback to the read_metadata function.
Add a status function ready for a later patch and name the functions
consistently.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move the existing snapshot exception store implementations out into
separate files.  Later patches will place these behind a new
interface in preparation for alternative implementations.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Rename struct exception_store to dm_exception_store.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Pull structures that bridge the gap between snapshot and
exception store out of dm-snap.h and put them in a new
.h file - dm-exception-store.h.  This file will define the
API for new exception stores.

Ultimately, dm-snap.h is unnecessary, since only dm-snap.c
should be using it.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

The same workqueue is used both for sending uevents and processing queued I/O.
Deadlock has been reported in RHEL5 when sending a uevent was blocked waiting
for the queued I/O to be processed.  Use scheduled_work() for the asynchronous
uevents instead.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Implement simple read-only sysfs entry for device-mapper block device.

This patch adds a simple sysfs directory named "dm" under block device
properties and implements
	- name attribute (string containing mapped device name)
	- uuid attribute (string containing UUID, or empty string if not set)

The kobject is embedded in mapped_device struct, so no additional
memory allocation is needed for initializing sysfs entry.

During the processing of sysfs attribute we need to lock mapped device
which is done by a new function dm_get_from_kobj, which returns the md
associated with kobject and increases the usage count.

Each 'show attribute' function is responsible for its own locking.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Rework table reference counting.

The existing code uses a reference counter. When the last reference is
dropped and the counter reaches zero, the table destructor is called.
Table reference counters are acquired/released from upcalls from other
kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all).
If the reference counter reaches zero in one of the upcalls, the table
destructor is called from almost random kernel code.

This leads to various problems:
* dm_any_congested being called under a spinlock, which calls the
  destructor, which calls some sleeping function.
* the destructor attempting to take a lock that is already taken by the
  same process.
* stale reference from some other kernel code keeps the table
  constructed, which keeps some devices open, even after successful
  return from "dmsetup remove". This can confuse lvm and prevent closing
  of underlying devices or reusing device minor numbers.

The patch changes reference counting so that the table destructor can be
called only at predetermined places.

The table has always exactly one reference from either mapped_device->map
or hash_cell->new_map. After this patch, this reference is not counted
in table->holders.  A pair of dm_create_table/dm_destroy_table functions
is used for table creation/destruction.

Temporary references from the other code increase table->holders. A pair
of dm_table_get/dm_table_put functions is used to manipulate it.

When the table is about to be destroyed, we wait for table->holders to
reach 0. Then, we call the table destructor.  We use active waiting with
msleep(1), because the situation happens rarely (to one user in 5 years)
and removing the device isn't performance-critical task: the user doesn't
care if it takes one tick more or not.

This way, the destructor is called only at specific points
(dm_table_destroy function) and the above problems associated with lazy
destruction can't happen.

Finally remove the temporary protection added to dm_any_congested().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Implement barrier support for single device DM devices

This patch implements barrier support in DM for the common case of dm linear
just remapping a single underlying device. In this case we can safely
pass the barrier through because there can be no reordering between
devices.

 NB. Any DM device might cease to support barriers if it gets
     reconfigured so code must continue to allow for a possible
     -EOPNOTSUPP on every barrier bio submitted.  - agk
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch adds the following target interfaces for request-based dm.

  map_rq    : for mapping a request

  rq_end_io : for finishing a request

  busy      : for avoiding performance regression from bio-based dm.
              Target can tell dm core not to map requests now, and
              that may help requests in the block layer queue to be
              bigger by I/O merging.
              In bio-based dm, this behavior is done by device
              drivers managing the block layer queue.
              But in request-based dm, dm core has to do that
              since dm core manages the block layer queue.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch prepares some kmem_caches for request-based dm.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Allow NULL buffer in dm_copy_name_and_uuid if you only want to return one of
the fields.

(Required by a following patch that adds these fields to sysfs.)
Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Check that the log bitmap will fit within the log device.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move log size validation from mirror target to log constructor.

Removed PAGE_SIZE restriction we no longer think necessary.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

rw_header function updates three members of io_req data every time
when I/O is processed. bi_rw and notify.fn are never modified once
they get initialized, and so they can be set in advance.

header_to_disk() can also be pulled out of write_header() since only one
caller needs it and write_header() can be replaced by rw_header()
directly.
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Change dm_unregister_target to return void and use BUG() for error
reporting.

dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.

This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.

This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Always increase the error count when I/O on a leg of a mirror fails.

The error count is used to decide whether to select an alternative
mirror leg.  If the target doesn't use the "handle_errors" feature, the
error count is not updated and the bio can get requeued forever by the
read callback.

Fix it by increasing error_count before the handle_errors feature
checking.

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

In create_log_context function, dm_io_client_destroy function needs
to be called, when memory allocation of disk_header, sync_bits and
recovering_bits failed, but dm_io_client_destroy is not called.

Cc: stable@kernel.org
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Acked-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Change yield() to msleep(1). If the thread had realtime priority,
yield() doesn't really yield, so the yielding process would loop
indefinitely and cause machine lockup.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move one dm_table_put() so that the last reference in the thread
gets dropped in __unbind().

This is required for a following patch,
dm-table-rework-reference-counting.patch, which will change the logic in
such a way that table destructor is called only at specific points in
the code.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

* 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits)
  mfd: Fix section mismatch in da903x
  mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
  mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
  mfd: dm355evm msp430 driver
  mfd: Add missing break from wm3850-core
  mfd: Add WM8351 support
  mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
  mfd: Handle missing WM8350 platform data
  mfd: Add WM8352 support
  mfd: Use irq_to_desc in twl4030 code
  power_supply: Add Dialog DA9030 battery charger driver
  mfd: Dialog DA9030 battery charger MFD driver
  mfd: Register WM8400 codec device
  mfd: Pass driver_data onto child devices
  mfd: Fix twl4030-core.c build error
  mfd: twl4030 regulator bug fixes
  mfd: twl4030: create some regulator devices
  mfd: twl4030: cleanup symbols and OMAP dependency
  mfd: twl4030: simplified child creation code
  power_supply: Add battery health reporting for WM8350
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: convert to stop_machine_create/destroy.
  stop_machine: introduce stop_machine_create/destroy.
  parisc: fix module loading failure of large kernel modules
  module: fix module loading failure of large kernel modules for parisc
  module: fix warning of unused function when !CONFIG_PROC_FS
  kernel/module.c: compare symbol values when marking symbols as exported in /proc/kallsyms.
  remove CONFIG_KMOD

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  swiotlb: Don't include linux/swiotlb.h twice in lib/swiotlb.c
  intel-iommu: fix build error with INTR_REMAP=y and DMAR=n
  swiotlb: add missing __init annotations

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fs/dlm/ast.c: fix warning
  dlm: add new debugfs entry
  dlm: add time stamp of blocking callback
  dlm: change lock time stamping
  dlm: improve how bast mode handling
  dlm: remove extra blocking callback check
  dlm: replace schedule with cond_resched
  dlm: remove kmap/kunmap
  dlm: trivial annotation of be16 value
  dlm: fix up memory allocation flags

* 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-omap: fix type of irq handler function
  i2c-s3c2410: Change IRQ to be plain integer.
  i2c-s3c2410: Allow more than one i2c-s3c2410 adapter
  i2c-s3c2410: Remove default platform data.
  i2c-s3c2410: Use platform data for gpio configuration
  i2c-s3c2410: Fixup style problems from checkpatch.pl
  i2c-omap: Enable I2C wakeups for 34xx
  i2c-omap: reprogram OCP_SYSCONFIG register after reset
  i2c-omap: convert 'rev1' flag to generic 'rev' u8
  i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
  i2c-omap: Clean-up i2c-omap
  i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
  i2c-omap: Mark init-only functions as __init
  i2c-omap: Add support for omap34xx
  i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
  i2c-omap: Add high-speed support to omap-i2c
  i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr()
  i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg

Fix up apparently-trivial conflict in drivers/i2c/busses/i2c-s3c2410.c