- 15 Nov, 2006 14 commits
-
-
Andrew Morton authored
Resetting the adapter causes the ServeRAID driver to exceed the max time allowed by the softlock watchdog. Resetting the hardware can easily require 30 or more seconds. To avoid the "BUG: soft lockup detected on CPU#0!" result, this patch adds a touch_nmi_watchdog() to the driver's MDELAY macro. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by:
Jack Hammer <jack_hammer@adaptec.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Adrian Bunk authored
This patch makes some needlessly global functions static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Jeff Garzik authored
BusLogic: use kzalloc(), remove cast to/from void* aic7xxx_old: fix typo in cast NCR53c406a: ifdef out static built code fd_mcs: ifdef out static built code ncr53c8xx: ifdef out static built code Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
Revert 15084a4a - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Kai Makisara authored
Printk -> sdev_printk change originally from Luben Tuikov <ltuikov@yahoo.com>. Loglevel changes prompted by Matthew Wilcox <matthew@wil.cx>. Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Luben Tuikov authored
Signed-off-by:
Luben Tuikov <ltuikov@yahoo.com> Signed-off-by:
-
Christoph Hellwig authored
scsi_assign_lock has been unused for a long time and is a bad idea in general, so kill it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
I wanted to add some BUG checks to scsi_prep_fn to make sure no one sends us a non-sg command, but this function is a horrible mess. So I decided to detangle the function and document what the valid cases are. While doing that I found that REQ_TYPE_SPECIAL commands aren't used by the SCSI layer anymore and we can get rid of the code handling them. The new structure of scsi_prep_fn is: (1) check if we're allowed to send this command (2) big switch on cmd_type. For the two valid types call into a function to set the command up, else error (3) code to handle error cases Because FS and BLOCK_PC commands are handled entirely separate after the patch this introduces a tiny amount of code duplication. This improves readabiulity though and will help to avoid the bidi command overhead for FS commands so it's a good thing. I've tested this on both sata and mptsas. Signed-off-by: -
Christoph Hellwig authored
scsi_send_eh_cmnd is the last user of non-sg commands currently. This patch switches it to a one-element SG list. Also updates the kerneldoc comment for scsi_send_eh_cmnd to reflect reality while we're at it. Test on my mptsas card, but this should get testing with as many drivers as possible. Signed-off-by:
-
Darrick J. Wong authored
This patch straightens out the code that distinguishes the various escb opcodes in escb_tasklet_complete so that they can be handled correctly. It also provides all the necessary code to create a workqueue item that tells libsas to abort a sas_task. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
This patch adds an external function, sas_abort_task, to enable LLDDs to abort sas_tasks. It also adds a work_struct so that the actual work of aborting a task can be shifted from tasklet context (in the LLDD) onto the scsi_host's workqueue. Signed-off-by:
-
Darrick J. Wong authored
This patch adds an EH done queue to sas_ha, converts the error handling strategy function and the sas_scsi_task_done functions in libsas to use the scsi_eh_* commands for error'd commands, and adds checks for the INITIATOR_ABORTED flag so that we do the right thing if a sas_task has been aborted by the initiator. Signed-off-by:
-
Alan Stern authored
If a drive reports that no media is present, there's no point in continuing to ask it about media status. This patch (as696) cuts the TUR polling short as soon as the drive reports no media instead of going a full 3 iterations. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 11 Oct, 2006 2 commits
-
-
Matthew Wilcox authored
Since it often takes around 20-30 seconds to scan a scsi bus, it's highly advantageous to do this in parallel with other things. The bulk of this patch is ensuring that devices don't change numbering, and that all devices are discovered prior to trying to start init. For those who build SCSI as modules, there's a new scsi_wait_scan module that will ensure all bus scans are finished. This patch only handles drivers which call scsi_scan_host. Fibre Channel, SAS, SATA, USB and Firewire all need additional work. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Linus Torvalds authored
This is needed by at least the Mac Mini's, which (incorrectly) come back from suspend with SCI_EN clear. Thanks to Frdric Riss for hunting this down. Acked-by:
Frdric Riss <frederic.riss@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 10 Oct, 2006 24 commits
-
-
Jeff Garzik authored
The error path path mistakenly called sysfs_create_group() rather than sysfs_remove_group(). They take the same arguments, so it's easy to cut-n-paste such a bug. Signed-off-by:
-
Jeff Garzik authored
- fix: toshoboe_invalid_dev() was recently removed, but not all callers were updated, causing the obvious linker error. Remove caller, because the check (like the one removed) isn't used. - fix: propagate request_irq() return value - cleanup: remove void* casts - cleanup: remove impossible ASSERTs Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix windfarm platform device usage [POWERPC] Fix i2c-powermac platform device usage [POWERPC] Fix secondary CPU startup on old "powersurge" SMP powermacs [POWERPC] ARCH=ppc pt_regs fixes [POWERPC] Update maple defconfig [POWERPC] Fix Maple secondary IDE interrupt [POWERPC] Make U4 PCIe work on maple [POWERPC] cell: fix default zImage build target [POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spaces [POWERPC] Fix xmon IRQ handler for pt_regs removal
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
split the data structures that exist in host- and disk-endian variants, annotate the fields of disk-endian ones, propagate changes. Signed-off-by:
-
Al Viro authored
inode->mode is disk-endian Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
pulled includes of endian.h from fs/befs/*.c to befs.h Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
