- 23 May, 2008 2 commits
-
-
Patrick McHardy authored
Herbert Xu points out that the use of seperate feature bits for features to be propagated to VLAN devices is going to get messy real soon. Replace the VLAN feature bits by a bitmask of feature flags to be propagated and restore the old GSO_SHIFT/MASK values. Signed-off-by:
Patrick McHardy <kaber@trash.net> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
- 22 May, 2008 38 commits
-
-
Komuro authored
fmvj18x_cs: The manfid of "NextCom NC5310 rev B" is MANF_ID_FUJITSU. but this card is MBH10302 based card. use ConfigBase to detect the cardtype for this card. Signed-off-by:Komuro <komurojun-mbn@nifty.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Komuro authored
keep bit7,8 of XIRCREG42_SWC1 in set_multicast_list. Signed-off-by:
-
Wang Chen authored
If alloc_skb failed, the recieved packet will be dropped. Do not increase rx_bytes for dropped packet. Signed-off-by:
Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by:
-
Wang Chen authored
Use standard routine for queue purging. Signed-off-by:
-
Wang Chen authored
Use standard routine for queue purging. Signed-off-by:
-
Paul Gortmaker authored
Commit cac1f3c8 factored out the code for get_phy_id so that it could be reused in multiple places. Turns out that some of the users can be modular, so we need to export this symbol as well. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Thomas Graf authored
The purpose of nla_parse_nested_compat() is to parse attributes which contain a struct followed by a stream of nested attributes. So far, it called nla_parse_nested() to parse the stream of nested attributes which was wrong, as nla_parse_nested() expects a container attribute as data which holds the attribute stream. It needs to call nla_parse() directly while pointing at the next possible alignment point after the struct in the beginning of the attribute. With this patch, I can no longer reproduce the reported leftover warnings. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
-
Krzysztof Halasa authored
WAN: protect protocol list in hdlc.c with RTNL. Signed-off-by:
Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by:
-
Julia Lawall authored
The following code appears in the function fs_init_instance in the file drivers/net/fs_enet/fs_enet-main.c. if (fep->ops == NULL) { printk(KERN_ERR DRV_MODULE_NAME ": %s No matching ops found (%d).\n", ndev->name, fpi->fs_no); err = -EINVAL; goto err; } This code implies that at the point of err, fep->ops can be NULL, so an extra test is needed before dereferencing this value. This problem was found using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E, E1; identifier f; statement S1,S2,S3; @@ * if (E == NULL) { ... when != if (E == NULL) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
-
Sreenivasa Honnur authored
- Updated version number Signed-off-by:
Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by:
Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by:
-
Sreenivasa Honnur authored
- Added napi support when MSIX is enabled. - Moved test_msi function from s2io_open to probe function. Signed-off-by:
-
Sreenivasa Honnur authored
- Move all the transmit completions to a single msi-x (alarm) vector. - Enable the continuous timer interrupt for only one transmit fifo. Signed-off-by:
Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Francois Romieu authored
The lifespan of the device covers the request_irq .. free_irq interval. The cast of a void * pointer is not needed either. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Huang Weiyi authored
Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Matteo Croce authored
* Resolve some locking issues using atomic_inc/atomic_dec * move status code in cpmac_check_status * unmark the BROKEN flag in Kconfig * move code which should have been in platform code in arch/mips/ar7/platform.c * fixed an IRQ storm which lets the kernel hang * fixed a double call to netif_start_queue which causes a kernel panic * don't fail to register the PHY, works on many devices now Signed-off-by:
Matteo Croce <matteo@openwrt.org> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Becky Bruce authored
The use of unsigned long causes the driver to fail on 32-bit systems which support 64-bit resources. Signed-off-by:
Becky Bruce <becky.bruce@freescale.com> Signed-off-by:
-
Aurelien Nephtali authored
Add support for Apple USB Ethernet Adapter. http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nplm=MB442Z/ASigned-off-by:
Aurelien Nephtali <aurelien@sitadelle.com> Acked-by:
Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Anton Vorontsov authored
This patch adds netpoll support for the uli526x ethernet driver -- simply call the interrupt handler for polling. To do this without disable_irq()/enable_irq() pair we should fully protect the handler. Luckily, it's already using irqsave spinlock, the only unprotected place is interrupts re-enabling write. It was safe to re-enable interrupts without holding the spinlock, but with netpoll possibility now it doesn't seem so. Patch was tested using netconsole and KGDBoE. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Andy Fleming authored
We were passing NULL as the device. When we actually start supporting more interesting memory configurations, this will break things, so we proactively are fixing the bug. Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Maciej W. Rozycki authored
PHYLIB was first marked as BROKEN on S390, then the enclosing menu marked as non-S390, then the two dependencies merged with the conversion to menuconfig. Reduce to non-S390. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Gerrit Renker authored
IPv4 would work with this driver only with static arp table entries, the patch reverts a padto introduced in commit 26a17b7b sc92031: start transmit return value bugfix The padto does not work because the driver code evaluates `len' later on and there are cases where skb->len is not updated accordingly. This was observed with ARP frames (skb->len = 42 bytes, !skb_cloned(), skb_tailroom = 84 bytes). Then in skb_pad(), the first condition is true, where skb->len is not updated. As a consequence, the driver uses 42 bytes instead of the 60 bytes, and the ARP frame never makes it onto the wire. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Stephen Hemminger authored
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also simplify and cleanup the alignment code. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Tobias Diedrich authored
nv_open() resets multicast settings, call nv_set_multicast(dev) to restore them. (Maybe this should rather be moved into nv_open()) Signed-off-by:
Tobias Diedrich <ranma+kernel@tdiedrich.de> Signed-off-by:
-
Krzysztof Halasa authored
Signed-off-by:
-
Adrian Bunk authored
This patch makes the needlessly global myri10ge_get_firmware_capabilities() static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Ramkrishna Vepa <ram.vepa@neterion.com> Cc: Rastapur Santosh <santosh.rastapur@neterion.com> Cc: Sivakumar Subramani <sivakumar.subramani@neterion.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Brian King authored
Fixes the following use after free oops: ehea: Reboot: freeing all eHEA resources Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6c5b Faulting instruction address: 0xd000000000354488 cpu 0x0: Vector: 300 (Data Access) at [c00000002ec6f310] pc: d000000000354488: .ehea_shutdown_single_port+0x50/0x78 [ehea] lr: d00000000035447c: .ehea_shutdown_single_port+0x44/0x78 [ehea] sp: c00000002ec6f590 msr: 8000000000009032 dar: 6b6b6b6b6b6b6c5b dsisr: 40000000 current = 0xc0000000281412e0 paca = 0xc0000000006df300 pid = 10930, comm = reboot enter ? for help [c00000002ec6f590] d00000000035d64c .ehea_remove+0x44/0x124 [ehea] (unreliable) [c00000002ec6f630] c000000000319f88 .of_platform_device_remove+0x40/0x58 [c00000002ec6f6a0] c000000000291018 .__device_release_driver+0xb0/0xf0 [c00000002ec6f730] c000000000291120 .driver_detach+0xc8/0xfc [c00000002ec6f7c0] c00000000028fe24 .bus_remove_driver+0xb4/0x114 [c00000002ec6f850] c000000000291768 .driver_unregister+0x54/0x74 [c00000002ec6f8e0] c00000000031a0c8 .of_unregister_driver+0x14/0x28 [c00000002ec6f950] c000000000023ba0 .ibmebus_unregister_driver+0x10/0x24 [c00000002ec6f9c0] d000000000354180 .ehea_reboot_notifier+0x30/0x4c [ehea] [c00000002ec6fa40] c0000000003c95a8 .notifier_call_chain+0x5c/0xcc [c00000002ec6fae0] c000000000082cd4 .__blocking_notifier_call_chain+0x70/0xb0 [c00000002ec6fb90] c000000000075cf8 .kernel_restart_prepare+0x24/0x58 [c00000002ec6fc10] c000000000075f0c .kernel_restart+0x20/0x6c [c00000002ec6fc90] c000000000078674 .sys_reboot+0x1d4/0x290 [c00000002ec6fe30] c0000000000086ac syscall_exit+0x0/0x40 Signed-off-by: -
Pierre Ynard authored
Some devices running some WinCE firmware (with SC_* Samsung processors according to the SynCE project, verified on a HTC P3600 device) fail to register because they apparently need extra time to respond correctly to requests. Increase the existing delay to satisfy them. Based on code from the SynCE project, on a suggestion of David Brownell. This patch Works For Me(tm). Signed-off-by:
Pierre Ynard <linkfanel@yahoo.fr> Acked-by:
David Brownell <david-b@pacbell.net> Cc: Greg KH <greg@kroah.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Andrew Morton authored
When dev_name() is changed to return `const char *': drivers/net/tokenring/olympic.c: In function 'olympic_probe': drivers/net/tokenring/olympic.c:234: warning: assignment discards qualifiers from pointer target type Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
When dev_name() is changed to return `const char *': drivers/net/tokenring/3c359.c: In function 'xl_probe': drivers/net/tokenring/3c359.c:318: warning: assignment discards qualifiers from pointer target type Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
pci_name() will be changed to return `const char *': drivers/net/pcnet32.c: In function 'pcnet32_probe1': drivers/net/pcnet32.c:1884: warning: passing argument 2 of 'pcnet32_alloc_ring' discards qualifiers from pointer target type Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
use cancel_delayed_work_sync() Cc: Ben Dooks <ben-linux@fluff.org> Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Stephen Hemminger authored
If device has to be reset by sky2_restart, then need to restore the VLAN acceleration settings. Signed-off-by:
-
Ben Hutchings authored
This driver has diverged from the out-of-tree driver to which the version number originally applied. It should be identified primarily by kernel version. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
