- 15 Sep, 2009 3 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
The pin setup for Dell S14 quirk is rather wrong for the latest driver. Fixed pin 0x0a, 0x0b, 0x0d and 0x0f. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Remove unnecessary (and buggy) init sequences left for IDT92HD83* codecs in the previous fixes. The DACs are now dynamically connected, thus shouldn't be set statically in init verbs. Also, the mono_nid is detected dynamically, thus shouldn't be set staticaly, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Sep, 2009 6 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
Add the quirk entry for HP dv6. Also add a workaround for the headphone detection by setting hp_detect=1 beforehand. Without this, the driver won't do auto-muting because BIOS doesn't give any HP pin but only a line-out pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It's possible that hp_detect is set even though no headphone pin is detected. The driver issues, however, an unsol event only to hp_pins[0], which can be invalid. This patch adds the check of the valid pin to send an unsol event at initialization and resume callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
A smiliar fix for IDT 92HD71Bxx codecs like the previous commit for other IDT/STAC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
IDT92HD73xx and STAC927x codecs use GPIO0 bit as EAPD on many machines. However, currently we don't set it unless the model is specified just for safety reason. But, most machines do need this bit, so this safety handling is rather annoying. This patch enables GPIO0 setup as default for them. Many HP / Dell laptops should work even without model override with this change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Sep, 2009 1 commit
-
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Sep, 2009 24 commits
-
-
Takashi Iwai authored
* topic/ymfpci: sound: ymfpci: increase timer resolution to 96 kHz
-
Takashi Iwai authored
* topic/usb-audio: ALSA: usb-audio - Fix types taken in min() sound: usb-audio: do not make URBs longer than sync packet interval sound: usb-audio: add MIDI drain callback sound: usb-audio: use multiple output URBs sound: usb-audio: use multiple input URBs sound: usb-audio: Xonar U1 digital output support
-
Takashi Iwai authored
* topic/tlv-minmax: ALSA: usb-audio - Correct bogus volume dB information ALSA: usb-audio - Use the new TLV_DB_MINMAX type ALSA: Add new TLV types for dBwith min/max
-
Takashi Iwai authored
* topic/soundcore-preclaim: sound: make OSS device number claiming optional and schedule its removal sound: request char-major-* module aliases for missing OSS devices chrdev: implement __[un]register_chrdev()
-
Takashi Iwai authored
* topic/snd-printk: ALSA: Fixed a typo of printk() ALSA: Add debug module option ALSA: core - strip too long file names in snd_print*()
-
Takashi Iwai authored
* topic/pcm-estrpipe-in-pm: ALSA: pcm - Tell user that stream to be rewound is suspended
-
Takashi Iwai authored
* topic/pcm-drain-nonblock: ALSA: pcm - Increase protocol version ALSA: pcm - Fix drain behavior in non-blocking mode
-
Takashi Iwai authored
* topic/oxygen: sound: oxygen: work around MCE when changing volume
-
Takashi Iwai authored
* topic/oss: ALSA: allocation may fail in snd_pcm_oss_change_params() sound: vwsnd: Fix setting of cfgval and ctlval in li_setup_dma() sound: fix OSS MIDI output data loss
-
Takashi Iwai authored
* topic/misc: ALSA: Remove unneeded ifdef from sound/core.h ALSA: Remove struct snd_monitor_file from public sound/core.h ALSA: Release v1.0.21
-
Takashi Iwai authored
* topic/midi: sound: rawmidi: disable active-sensing-on-close by default sound: seq_oss_midi: remove magic numbers sound: seq_midi: do not send MIDI reset when closing seq-midi: always log message on output overrun
-
Takashi Iwai authored
* topic/ice1724-pm: ALSA: ice1724 - Fix section mismatch ALSA: ice1724 - Patch for suspend/resume for Audiotrak Prodigy HD2
-
Takashi Iwai authored
* topic/hdsp: ALSA: hdsp - allow proc reporting with disconnected io box
-
Takashi Iwai authored
* topic/hda: (92 commits) ALSA: hda - Use auto model for HP laptops with ALC268 codec ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital ALSA: hda - Add support of Alienware M17x laptop ALSA: hda - Remove dead codes from patch_sigmatel.c ALSA: hda - Fix input source selection of IDT92HD73xx ALSA: hda - Fix obsolete CONFIG_SND_DEBUG_DETECT ALSA: hda - Unmute docking line-out as default with AD1984A codec ALSA: hda - Add another entry for Nvidia HDMI device ALSA: hda - Add missing GPIO initialization for AD1984A laptop model ALSA: hda - Add support of docking auto-mute/mic for AD1984A laptop model ALSA: hda - Fix ALC268/ALC269 headphone pin routing ALSA: hda - Create "Digital Mic Capture Volume" correctly for IDT codecs ALSA: hda - Add more quirk for HP laptops with AD1984A ALSA: hda - Add / fix model entries for HD-audio driver ALSA: hda - Add full audio support on Acer Aspire 7730G notebook ALSA: hda - Improve auto-cfg mixer name for ALC662 ALSA: hda - Improve auto-cfg mixer name for ALC861-VD ALSA: hda - Improve auto-cfg mixer name for ALC262 ALSA: hda - Improve auto-cfg mixer name for ALC260 ALSA: hda - Improve auto-cfg mixer name for ALC880 ...
-
Takashi Iwai authored
* topic/dummy: ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128 ALSA: dummy - Add debug proc file ALSA: Add const prefix to proc helper functions ALSA: Re-export snd_pcm_format_name() function ALSA: dummy - Fake buffer allocations ALSA: dummy - Fix the timer calculation in systimer mode ALSA: dummy - Add more description ALSA: dummy - Better jiffies handling ALSA: dummy - Support high-res timer mode
-
Takashi Iwai authored
* topic/dma-sgbuf: ALSA: Fix SG-buffer DMA with non-coherent architectures
-
Takashi Iwai authored
* topic/ctxfi: ALSA: ctxfi - Simple code clean up ALSA: ctxfi - Native timer support for emu20k2
-
Takashi Iwai authored
* topic/ctl-add-remove-fixes: sound: snd_ctl_remove_user_ctl: prevent removal of kernel controls sound: snd_ctl_remove_unlocked_id: simplify user control counting sound: snd_ctl_remove_unlocked_id: simplify error paths sound: snd_ctl_elem_add: fix value count check
-
Takashi Iwai authored
* topic/cs46xx: ALSA: cs46xx - Fix minimum period size
-
Takashi Iwai authored
* topic/cmi8330: ALSA: cmi8330: Allow MPU-401-less operation ALSA: cmi8330: find OPL3 port automatically cmi8330: Add basic CMI8329 support ALSA: cmi8330: revert comments about AD1848 back
-
Takashi Iwai authored
* topic/cleanup: ALSA: info - Use krealloc()
-
Takashi Iwai authored
* topic/azt3328: ALSA: azt3328: fix previous breakage, improve suspend, cleanups ALSA: azt3328: large codec cleanup, add I2S port etc. ALSA: azt3328: fix Kconfig entry
-
Takashi Iwai authored
* topic/asoc: (226 commits) ASoC: au1x: PSC-AC97 bugfixes ASoC: Fix WM835x Out4 capture enumeration ASoC: Remove unuused hw_read_t ASoC: fix pxa2xx-ac97.c breakage ASoC: Fully specify DC servo bits to update in wm_hubs ASoC: Debugged improper setting of PLL fields in WM8580 driver ASoC: new board driver to connect bfin-5xx with ad1836 codec ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI ASoC: davinci: i2c device creation moved into board files ASoC: Don't reconfigure WM8350 FLL if not needed ASoC: Fix s3c-i2s-v2 build ASoC: Make platform data optional for TLV320AIC3x ASoC: Add S3C24xx dependencies for Simtec machines ASoC: SDP3430: Fix TWL GPIO6 pin mux request ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI OMAP: McBSP: Use textual values in DMA operating mode sysfs files ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 ASoC: Select core DMA when building for S3C64xx ...
-
Takashi Iwai authored
* topic/ali5451-cleanup: ALSA: ali5451: remove dead code
-
- 09 Sep, 2009 3 commits
-
-
Linus Torvalds authored
-
Ed Cashin authored
Andy Whitcroft reported an oops in aoe triggered by use of an incorrectly initialised request_queue object: [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add an uninitialized object, something is seriously wrong. [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu [ 2645.959107] Call Trace: [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70 [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0 [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160 [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe] The request queue of an aoe device is not used but can be allocated in code that does not sleep. Bruno bisected this regression down to cd43e26f block: Expose stacked device queues in sysfs "This seems to generate /sys/block/$device/queue and its contents for everyone who is using queues, not just for those queues that have a non-NULL queue->request_fn." Addresses http://bugs.launchpad.net/bugs/410198 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942 Note that embedding a queue inside another object has always been an illegal construct, since the queues are reference counted and must persist until the last reference is dropped. So aoe was always buggy in this respect (Jens). Signed-off-by: Ed Cashin <ecashin@coraid.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bruno Premont <bonbons@linux-vserver.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Linus Torvalds authored
Reinette Chatre reports a frozen system (with blinking keyboard LEDs) when switching from graphics mode to the text console, or when suspending (which does the same thing). With netconsole, the oops turned out to be BUG: unable to handle kernel NULL pointer dereference at 0000000000000084 IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915] and it's due to the i915_gem.c code doing drm_irq_uninstall() after having done i915_gem_idle(). And the i915_gem_idle() path will do i915_gem_idle() -> i915_gem_cleanup_ringbuffer() -> i915_gem_cleanup_hws() -> dev_priv->hw_status_page = NULL; but if an i915 interrupt comes in after this stage, it may want to access that hw_status_page, and gets the above NULL pointer dereference. And since the NULL pointer dereference happens from within an interrupt, and with the screen still in graphics mode, the common end result is simply a silently hung machine. Fix it by simply uninstalling the irq handler before idling rather than after. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Sep, 2009 3 commits
-
-
Manuel Lauss authored
This patch fixes the following bugs: - only reprogram bitdepth if it has changed since last call to hw_params. - add locking inside ac97_read/write functions: When reprogramming sample depth, the ac97 unit has to be disabled, which should not be done in the middle of codec register accesses. - retry timed-out codec register accesses. - wait for status bits to set/clear when starting/stopping various functional blocks; very important after reenabling AC97 unit else sound may be distorted (e.g. high-pitch noise in 1kHz sine wave). - clear fifos before/after starting/stopping RX/TX. - longer timeouts waiting for PSC/AC97 ready after cold reset with certain codecs this can take ridiculous amounts of time. Run-tested on various Au1200 platforms with various codecs. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Zhenyu Wang authored
eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
Increase the limit of PCM substreams to 128. The default value is unchanged; only the max accept value is increased. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-