- 10 Oct, 2007 28 commits
-
-
Adrian Bunk authored
This patch fixes the following build error: <-- snip --> ... MODPOST 2135 modules make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Remove incorrect range check of symbol rate, spotted by the coverity checker and reported by Adrian Bunk. These range checks are performed by dvb_core now. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Add range check of frequency and symbol rate to the FE_SET_FRONTEND ioctl. This will also avoid a divide-by zero exception in the stv0297 driver, if symbol rate is set to 0. Signed-off-by:
-
Oliver Endriss authored
Convert av7110_v4l.c to use i2c_transfer() instead of saa7146_i2c_transfer(). Make saa7146_i2c_transfer() static. Signed-off-by:
-
Hans Verkuil authored
This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by:
Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
ivtv-fb: initializing the framebuffer should trigger ivtv firmware load Signed-off-by:
-
Hans Verkuil authored
The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Olivier DANET authored
Add initial support for Dual-DVB-T stick based on DiB7700 and MT2266 - Microtune MT2266 driver. - Preliminary support for these dual tuner devices : - Pinnacle Dual DVB-T diversity - Terratec Cinergy DT USB XS diversity - Hauppauge Nova TD USB Signed-off-by:
Olivier DANET <odanet@caramail.com> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Jesper Juhl authored
This patch cleans up duplicate includes in include/media/ Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Jesper Juhl authored
This patch cleans up duplicate includes in drivers/media/ Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Ian Armstrong authored
Signed-off-by:
Ian Armstrong <ian@iarmst.co.uk> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Add the ivtv-fb framebuffer driver for cx23415 devices (currently only the Hauppauge PVR-350 cards). This makes it possible to use the On-Screen Display functionality of these cards, either for menus during MPEG playback, or as a console or X display. Signed-off-by:
Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by:
Chris Kennedy <c@groovy.org> Signed-off-by:
John P Harvey <john.p.harvey@btinternet.com> Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
-
Rasmus Rohde authored
add code for autodetection and firmware download to the Miglia TVMini USB DVB-T adapter. After firmware download, the device re-registers using the WT220U_ZL0353_WARM usb id. Signed-off-by:
Rasmus Rohde <rohde@duff.dk> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Trent Piepho authored
Add permissions to all the module parameters so they can be queried and set (when possible) via sysfs. Add description for the vidmem parameter. Change the video_nr parameter to an array, so that the video number can be specified when a user has more than one card. The driver would try to give all cards the same number otherwise, which will fail for all cards after the first. The default_input option would only allow values of 0 or 1, contrary to the description. Allow values up to the number of inputs defined for the card. Add description of lock_norm's different behavior for 1 and >1. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Acked-by:
Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by:
-
Jean Delvare authored
Debugging cleanups to the zr36067 driver: * Use module_param_named() to declare the debug parameter, so we can use a single global variable to handle the debug level. This makes the driver a bit smaller (by 648 bytes on x86_64), thanks to one less level of indirection on every use. * Change the debug parameter sysfs permissions, so that the debug level can be adjusted at runtime, as is done in many other media/video drivers. * The debug level is between 0 and 5, not 0 and 4. * Move the zr_debug export and dprintk macro definition to a header file so that we don't have to define them in each source file. * Simplify a duplicate test on zr_debug. Note that zr_debug was subsequently renamed to debug_zr36067 to avoid possible conflicts with other Zoran device drivers, on a suggestion by Trent Piepho. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Sakari Ailus authored
Fix a compile warning on non-32-bit machines in v4l2-int-device.h. Add internal ioctl interface fallback function for ioctls with one argument. Signed-off-by:
Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Sakari Ailus authored
Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used e.g. in Nokia N800 internet tablet. This driver uses the new V4L2 internal ioctl interface. Signed-off-by:
-
Sakari Ailus authored
This patch adds an internal ioctl-like interface which can be used in situations where a single Video4Linux device is implemented by multiple device drivers. One master device controls one or more slave devices. The slaves provide Video4Linux ioctl-like interface for the use of the master. Only a handful of ioctls are implemented at the moment. More can (and should) be added as more functionality is required. Signed-off-by:
-
- 09 Oct, 2007 7 commits
-
-
Linus Torvalds authored
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
-
Trond Myklebust authored
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Florian Fainelli authored
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Giuseppe Sacco authored
Signed-off-by:
Giuseppe Sacco <eppesuig@debian.org> Signed-off-by:
-
- 08 Oct, 2007 5 commits
-
-
Maarten Bressers authored
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b1287, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by:Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Karsten Keil authored
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Fix ICMPv6 redirect handling with target multicast address [PKT_SCHED] cls_u32: error code isn't been propogated properly [ROSE]: Fix rose.ko oops on unload [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
-
Yan Zheng authored
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect, statement 'goto out_put_req' is executed. At label 'out_put_req', aio_put_req(..) is called, which requires 'req->ki_filp' set. Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Yan Zheng authored
find_lock_page increases page's usage count, we should decrease it before return VM_FAULT_SIGBUS Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
