- 15 Sep, 2009 40 commits
-
-
Martyn Welch authored
* Add ifdef wrapper to vme_user.h * Correct Initialisation routine * Add remove routine to correct probe routine * Remove old test routines Signed-off-by:
Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Martyn Welch authored
As identified by Jiri, there is no syncronisation before callback is removed. Signed-off-by:
-
Emilio G. Cota authored
It's checking the wrong functions; fix it. Signed-off-by:
Emilio G. Cota <cota@braap.org> Acked-by:
-
Martyn Welch authored
Add the ability to define all slots and current slot in the VME buses bind table. Signed-off-by:
-
Martyn Welch authored
As identified by Jiri, the VME interrupt free routine removes the service routine before disabling the interrupt. Re-order operations to be performed in the reverse of the request routine. Signed-off-by:
-
Martyn Welch authored
This describes the current vme api, along with a list of things that needs to be fixed up. Signed-off-by:
-
Martyn Welch authored
Signed-off-by:
-
Martyn Welch authored
Currently this code doesn't compile, so it is disabled. That should be fixed up... Signed-off-by:
-
Martyn Welch authored
Adds a VME userspace access driver Signed-off-by:
-
Martyn Welch authored
This framework aims to colelese, extend and improve the VME Linux drivers found at vmelinux.org, universe2.sourceforge.net and openfmi.net/frs/?group_id=144. The last 2 drivers appear to be forks of the original code found at vmelinux.org though have extended the codebase. Signed-off-by:
-
Roel Kluin authored
If pDevice->sOpts.nRxDescs{0,1} or nTxDescs[{0,1}] is zero, the loop ends with i == 0, and we write aRD{0,1}Ring[-1]. apTD{0,1}Rings[-1] respectively. Signed-off-by:Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Jim Lieb authored
Remove use of tbit macros adn remove header file. Signed-off-by:
Jim Lieb <lieb@canonical.com> Signed-off-by:
-
Jim Lieb authored
Remove use of tbit macros and remove the header file. Signed-off-by:
-
Jim Lieb authored
Remove gratuitous macros re-defining usb functions. One result is to make kcompat.h now identical in both driver dirs Signed-off-by:
-
Jim Lieb authored
Remove tpci.h. It is not even used in the usb version Minor cleanup of janitor work missed earlier. Signed-off-by:
-
Jim Lieb authored
Convert pci register/command defs to use kernel definitions. Remove tpci.h. Signed-off-by:
-
Jim Lieb authored
Remove references to umem.h macros and refer directly to memcpy functions. Delete the include file. Signed-off-by:
-
Jim Lieb authored
Remove references to umem.h macros and refer directly to memcpy functions. Delete the include file. Signed-off-by:
-
Jim Lieb authored
Remove cplusplus lines from include files Remove needless ifdefs on includes to conform with C conventions. Remove misc commented code/includes Update TODO Signed-off-by:
-
Jim Lieb authored
Remove cplusplus lines from include files Remove needless ifdefs on includes to conform with C conventions. Remove misc commented code/includes Update TODO Signed-off-by:
-
Jim Lieb authored
Clean up unused typedefs and macros to remove Win32'isms and misc non-linux constructs. Text edits to referencing source for less frequently used macros. Signed-off-by:
-
Jim Lieb authored
Clean up unused typedefs and macros to remove Win32'isms and misc non-linux constructs. Text edits to referencing source for less frequently used macros. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Cc: Forest Bond <forest@alittletooquiet.net> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Cc: Forest Bond <forest@alittletooquiet.net> Signed-off-by:
-
Jim Lieb authored
Text only changes to remove textual differences between the vt6655 and vt6656 trees in prep for driver merge. Signed-off-by:
-
Jim Lieb authored
These changes in vt6656 match changes in vt6655 to minimize text differences prior to merging the two trees into a single driver source. Signed-off-by:
-
Jim Lieb authored
The vt6655 and vt6656 drivers are from a common origin but have drifted apart with minor textual differences. There are two changes: s/DEVICE_PRT/DBG_PRT/g and s/byPktTyp/byPktType/g This significantly reduces the differences between the two file sets in preparation to merging the common code. A few whitespace and text bits were also adjusted. Signed-off-by:
-
Jim Lieb authored
Fix compile problems with 64bit. These issues could cause corrupted address crashes. Cleanup definition use to use more portable kernel typedefs etc. Signed-off-by:
-
Jim Lieb authored
Fix compile problems with 64bit. These issues could cause corrupted address crashes. In the process, replaced some definitions to use more portable kernel types. Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/staging/otus/usbdrv.h: linux/usb.h is included more than once. Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
-
Bill Pemberton authored
The parameter list for qt_open() was from the old non usb-serial driver. Signed-off-by:
Bill Pemberton <wfp5p@virginia.edu> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: use %td for ptrdiff: drivers/staging/udlfb/udlfb.h:209: warning: format '%d' expects type 'int', but argument 3 has type 'long int' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexander Beregalov authored
As the driver is in mainline now we can remove such dependencies. WIRELESS_EXT is 22 now. Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Mike Galbraith authored
The rest of the known universe prefers wlanN for wireless interface names, to the point that some distro configuration tools, such as opensuse's Yast, don't even allow the user to enter a name, and simply pre-select "wlan". Signed-off-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Julia Lawall authored
dst_state_alloc returns an ERR_PTR value in an error case instead of NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = dst_state_alloc(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Stoyan Gaydarov authored
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/Signed-off-by:
Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by:
-
Julia Lawall authored
Correct priority problem in the use of ! and &. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ - !E & C + !(E & C) // </smpl> Signed-off-by:
-
Uwe Kleine-König authored
This patch was generated by running git grep -E -l 'man[ae]g?ment' drivers/staging | xargs -r perl -p -i -e 's/\bman[ae]g?ment\b/management/g' Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Shan Wei authored
Compared with other drivers, the "ret" should be nagative and returned. But in vhci_hdc, it always return 0; I dont't use the driver, and I'm not familiar with the code. Hope the patch is helpful. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
-
Felipe Balbi authored
we need to get rid of those driver-specific error codes Signed-off-by:
Felipe Balbi <me@felipebalbi.com> Signed-off-by:
-
