- 17 Mar, 2008 10 commits
-
-
Jay Cliburn authored
Add some debug printks if we encounter a potentially bad receive return descriptor. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Acked-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
Use netif_msg_* for console messages emitted by the driver. Add a parameter to allow control of messaging at driver startup, and also add the ability to control it with ethtool. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Acked-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
Use skb->csum_start for tx checksum offload preparation. Also swap the variables css and cso so they hold the intended values of csum start and offset, respectively. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Acked-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
The transmit packet descriptor consists of four 32-bit words, with word 3 upper bits overloaded depending upon the condition of its bits 3 and 4. The driver currently duplicates all word 2 and some word 3 register bit definitions unnecessarily and also uses a set of nested structures in its definition of the TPD without good cause. This patch adds a lengthy comment describing the TPD, eliminates duplicate TPD bit definitions, and simplifies the TPD structure itself. It also expands the TSO check to correctly handle custom checksum versus TSO processing using the revised TPD definitions. Finally, shorten some variable names in the transmit processing path to reduce line lengths, rename some variables to better describe their purpose (e.g., nseg versus m), and add a comment or two to better describe what the code is doing. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Acked-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
Add the ethtool register dump option to the atl1 driver. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Acked-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
The L1 tx packet descriptor expects TCP Header Length to be expressed as a number of 32-bit dwords. The atl1 driver uses tcp_hdrlen() to populate the field, but tcp_hdrlen() returns the header length in bytes, not in dwords. Add a shift to convert tcp_hdrlen() to dwords when we write it to the tpd. Also, some of our bit assignments are made to the wrong tpd words. Change those to the correct words. Finally, since all this fixes TSO, enable TSO by default. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Acked-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
The future atl2 driver and the existing atl1 driver can share certain functions and definitions. Move these shareable functions and definitions out of atl1-specific files and into atlx.c and atlx.h. Some transitory hackery will be present until atl2 is merged. Reduce the number of source files by moving ethtool, hw, and param functions from separate files into atl1_main.c, then rename it to just atl1.c. Move all atl1-specific definitions from atl1_hw.h to atl1.h. Finally, clean up to make checkpatch.pl happy. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jay Cliburn authored
In preparation for a future Atheros L2 NIC driver (called atl2), relocate the atl1 driver into a new /drivers/net/atlx directory that will ultimately be shared with the future atl2 driver. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
The xircom_tulip_cb driver has been replaced the xircom_cb driver, and since it depended on BROKEN_ON_SMP it e.g. was no longer present in many distribution kernels. This patch therefore removes it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
All the hardware supported by this driver is now supported by the skge driver. The last remaining issue was support for ancient dual port SysKonnect fiber boards, and the skge driver now does these correctly (p.s. sk98lin was always broken on these old dual port boards anyway). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
- 16 Mar, 2008 20 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] make ptr_to_pide() static [PARISC] head.S: section mismatch fixes [PARISC] add back Crestone Peak cpu [PARISC] futex: special case cmpxchg NULL in kernel space [PARISC] clean up show_stack [PARISC] add pa8900 CPUs to hardware inventory [PARISC] clean up include/asm-parisc/elf.h [PARISC] move defconfig to arch/parisc/configs/ [PARISC] add back AD1889 MAINTAINERS entry [PARISC] pdc_console: fix bizarre panic on boot [PARISC] dump_stack in show_regs [PARISC] pdc_stable: fix compile errors [PARISC] remove unused pdc_iodc_printf function [PARISC] bump __NR_syscalls [PARISC] unbreak pgalloc.h [PARISC] move VMALLOC_* definitions to fixmap.h [PARISC] wire up timerfd syscalls [PARISC] remove old timerfd syscall
-
FUJITA Tomonori authored
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Helge Deller authored
- move boot_args[] into the init section - move $global$ into the read_mostly section - fix the following two section mismatches: WARNING: vmlinux.o(.text+0x9c): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20') WARNING: vmlinux.o(.text+0xa0): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20') Signed-off-by: Helge Deller <deller@gmx.de> SIgned-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Kyle McMartin authored
Crestone Peak Slow is the 800MHz PA-8800 cpu in the C8000. 0x88B is probably the Crestone Peak Fast. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Kyle McMartin authored
Commit a0c1e907 added code to futex.c to detect whether futex_atomic_cmpxchg_inatomic was implemented at run time: + curval = cmpxchg_futex_value_locked(NULL, 0, 0); + if (curval == -EFAULT) + futex_cmpxchg_enabled = 1; This is bogus on parisc, since page zero in kernel virtual space is the gateway page for syscall entry, and should not be read from the kernel. (That, and we really don't like the kernel faulting on its own address space...) Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Kyle McMartin authored
When we show_regs, we obviously have a struct pt_regs of the calling frame. Use these in show_stack so we don't have the entire bogus call trace up to the show_stack call. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
James Bottomley authored
This patch adds the known pa8900 CPUs to the inventory list and removes the Crestone Peak one which apparently never escaped into the wild. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Randolph Chung authored
Cleanup some cruft. No functionality changes. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Adrian Bunk authored
This patch moves the default parisc defconfig to arch/parisc/configs/generic_defconfig where it belongs and selects it as the default defconfig through KBUILD_DEFCONFIG. Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Thibaut VARENE authored
Signed-off-by: Thibaut VARENE <T-Bone@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Kyle McMartin authored
Commit 721fdf34 introduced a subtle bug by accidently removing the "static" from iodc_dbuf. This resulted in, what appeared to be, a trap without *current set to a task. Probably the result of a trap in real mode while calling firmware. Also do other misc clean ups. Since the only input from firmware is non blocking, share iodc_dbuf between input and output, and spinlock the only callers. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Originally, show_stack was used in BUG() output. However, a recent commit changed it to print register state (no idea what that's supposed to help, really...) and parisc was missing a backtrace because of it. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Joel Soete authored
Signed-off-by: Joel Soete <rubisher@scarlet.be> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
oops, forgot this in the previous commit. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Commit 2f569afd broke the compile rather spectacularly. Fix code errors. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
They make way more sense here, really... Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
- 15 Mar, 2008 10 commits
-
-
Linus Torvalds authored
This essentially reverts commit 71fc47a9 ("ACPI: basic initramfs DSDT override support"), because the code simply isn't ready. It did ugly things to the init sequence to populate the rootfs image early, but that just ended up showing other problems with the whole approach. The fact is, the VFS layer simply isn't initialized this early, and the relevant ACPI code should either run much later, or this shouldn't be done at all. For 2.6.25, we'll just pick the latter option. We can revisit this concept later if necessary. Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Renninger <trenn@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Len Brown <len.brown@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Markus Gaugusch <dsdt@gaugusch.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
DATA_CARRY is not boolean Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Fix tbench regression in 2.6.25-rc1
-
Ingo Molnar authored
Use the existing calc_delta_mine() calculation for sched_slice(). This saves a divide and simplifies the code because we share it with the other /cfs_rq->load users. It also improves code size: text data bss dec hex filename 42659 2740 144 45543 b1e7 sched.o.before 42093 2740 144 44977 afb1 sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
-
Ingo Molnar authored
Fair sleepers need to scale their latency target down by runqueue weight. Otherwise busy systems will gain ever larger sleep bonus. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
-
Peter Zijlstra authored
Currently we schedule to the leftmost task in the runqueue. When the runtimes are very short because of some server/client ping-pong, especially in over-saturated workloads, this will cycle through all tasks trashing the cache. Reduce cache trashing by keeping dependent tasks together by running newly woken tasks first. However, by not running the leftmost task first we could starve tasks because the wakee can gain unlimited runtime. Therefore we only run the wakee if its within a small (wakeup_granularity) window of the leftmost task. This preserves fairness, but does alternate server/client task groups. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
lw->weight can be 0 for a short time during bootup. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
-
Ingo Molnar authored
Clear the cached inverse value when updating load. This is needed for calc_delta_mine() to work correctly when using the rq load. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
-
Peter Zijlstra authored
Current min_vruntime tracking is incorrect and will cause serious problems when we don't run the leftmost task for some reason. min_vruntime does two things; 1) it's used to determine a forward direction when the u64 vruntime wraps, 2) it's used to track the leftmost vruntime to position newly enqueued tasks from. The current logic advances min_vruntime whenever the current task's vruntime advance. Because the current task may pass the leftmost task still waiting we're failing the second goal. This causes new tasks to be placed too far ahead and thus penalizes their runtime. Fix this by making min_vruntime the min_vruntime of the waiting tasks by tracking it in enqueue/dequeue, and compare against current's vruntime to obtain the absolute minimum when placing new tasks. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Hiroshi Shimamoto authored
Fix a hard to trigger crash seen in the -rt kernel that also affects the vanilla scheduler. There is a race condition between schedule() and some dequeue/enqueue functions; rt_mutex_setprio(), __setscheduler() and sched_move_task(). When scheduling to idle, idle_balance() is called to pull tasks from other busy processor. It might drop the rq lock. It means that those 3 functions encounter on_rq=0 and running=1. The current task should be put when running. Here is a possible scenario: CPU0 CPU1 | schedule() | ->deactivate_task() | ->idle_balance() | -->load_balance_newidle() rt_mutex_setprio() | | --->double_lock_balance() *get lock *rel lock * on_rq=0, ruuning=1 | * sched_class is changed | *rel lock *get lock : | : ->put_prev_task_rt() ->pick_next_task_fair() => panic The current process of CPU1(P1) is scheduling. Deactivated P1, and the scheduler looks for another process on other CPU's runqueue because CPU1 will be idle. idle_balance(), load_balance_newidle() and double_lock_balance() are called and double_lock_balance() could drop the rq lock. On the other hand, CPU0 is trying to boost the priority of P1. The result of boosting only P1's prio and sched_class are changed to RT. The sched entities of P1 and P1's group are never put. It makes cfs_rq invalid, because the cfs_rq has curr and no leaf, but pick_next_task_fair() is called, then the kernel panics. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-