- 08 Jan, 2009 22 commits
-
-
Qinghuang Feng authored
There is no argument named @chain in ext2_splice_branch, remove references to it. Signed-off-by:
Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jüri Reitel authored
Remove RTC register value checks from the rtc-ds1307 probe() function. They were left over from the legacy style I2C driver, which had to defend against finding a non-RTC chip when the driver was probed. Also fix a minor glitch in the alarm support: DS1307 chips don't have alarms, so name those methods after one of the chips which actually *do* have alarms (DS1337). Signed-off-by:
Jüri Reitel <juri.reitel@liewenthal.ee> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Sebastien Barre <sbarre@sdelcc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
BARRE Sebastien authored
Change i2c access functions to SMBus access functions in order to use the ds1307 with SMBus adapter. Signed-off-by:
Sebastien Barre <sbarre@sdelcc.com> Acked-by:
David Brownell <david-b@pacbell.net> Tested-by:
Alessandro Zummo <a.zummo@towertech.it> Acked-by:
-
Alex Zeffertt authored
The xenfs filesystem exports various interfaces to usermode. Initially this exports a file to allow usermode to interact with xenbus/xenstore. Traditionally this appeared in /proc/xen. Rather than extending procfs, this patch adds a backward-compat mountpoint on /proc/xen, and provides a xenfs filesystem which can be mounted there. Signed-off-by:
Alex Zeffertt <alex.zeffertt@eu.citrix.com> Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Qinghuang Feng authored
no argument named @xbt in xenbus_switch_state(), remove it. Signed-off-by:
-
Dave Kleikamp authored
sync_filesystems() shouldn't be calling async_synchronize_full_special while holding a spinlock. The second while loop in that function is the right place for this anyway. Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-by:
Grissiom <chaos.proton@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Work around branch tracer warning. sparc64: Fix unsigned long long warnings in drivers. sparc64: Use unsigned long long for u64. sparc: refactor code in fault_32.c sparc64: refactor code in init_64.c sparc64: refactor code in viohs.c sparc: make proces_ver_nack a bit more readable
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10191a): Update MAINTAINERS entries on media drivers V4L/DVB (10190): cx88: Fix some Kbuild troubles V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization V4L/DVB (10181): v4l2-device: Fix some sparse warnings V4L/DVB (10180): drivers/media: Fix a number of sparse warnings V4L/DVB (10179): tda8290: Fix two sparse warnings V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols V4L/DVB (10177): Fix sparse warnings on em28xx V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: (67 commits) nfsd: get rid of NFSD_VERSION nfsd: last_byte_offset nfsd: delete wrong file comment from nfsd/nfs4xdr.c nfsd: git rid of nfs4_cb_null_ops declaration nfsd: dprint each op status in nfsd4_proc_compound nfsd: add etoosmall to nfserrno NFSD: FIDs need to take precedence over UUIDs SUNRPC: The sunrpc server code should not be used by out-of-tree modules svc: Clean up deferred requests on transport destruction nfsd: fix double-locks of directory mutex svc: Move kfree of deferral record to common code CRED: Fix NFSD regression NLM: Clean up flow of control in make_socks() function NLM: Refactor make_socks() function nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT SUNRPC: Ensure the server closes sockets in a timely fashion NFSD: Add documenting comments for nfsctl interface NFSD: Replace open-coded integer with macro NFSD: Fix a handful of coding style issues in write_filehandle() NFSD: clean up failover sysctl function naming ...
-
David S. Miller authored
As reported by Sam Ravnborg, Gcc-3.4.5 does not handle: if (get_user() || get_user()) with the new branch tracer enabled. Just seperate it out into seperate statements for now so people can get work done. Signed-off-by:David S. Miller <davem@davemloft.net>
-
Mauro Carvalho Chehab authored
This patch updates the MAINTAINERS entries for the media drivers. We are doing a few changes during 2009 to improve patch handling for drivers/media stuff. Currently, v4l-dvb-maintainer list at linuxtv.org were used to to be v4l/dvb driver maintainers ML, in order to keep track of patch merge requests and to receive bug fixes. This list allows posting for everybody, but, in order to avoid spam, the user subscribe/unsubscribe at the ML is moderated. Other development discussions and end-user forums happened on two separated ML (one for V4L and another for DVB). At the beginning of 2009, we've created linux-media@vger.kernel.org, meaning to be the main upstream development mailing list for drivers/media, including V4L and DVB core and drivers. The choice for vger.kernel.org were due to the fact that most of upstream lists are there. Also, its anti-spam filtering rules are better than what we currently have at linuxtv.org. For now, both video4linux-list and linux-dvb ML will remain active, but more focused on end users. It is expected that those lists will gradually be replaced also by linux-media@vger.kernel.org. This patch reflect those changes at linux MAINTAINERS file. Since the development and bug fix discussions will now happen at linux-media@vger.kernel.org, this patch does the following changes - replaces v4l-dvb-maintainer ML for the new linux-media@vger.kernel.org; - replaces video4linux ML for the new linux-media@vger.kernel.org; While here, it also: - Fixes the existing -git tree entries for drivers/media (since the repository name changed); - Adds the missing drivers/media -git tree entry on a few maintainers entries that don't point to a tree. Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
As Randy Dunlap <randy.dunlap@oracle.com> reported, cx88 has some compilation issues: drivers/built-in.o: In function `cx88_call_i2c_clients': (.text+0x20af17): undefined reference to `videobuf_dvb_get_frontend' drivers/built-in.o: In function `cx8802_probe': cx88-mpeg.c:(.devinit.text+0x268c4): undefined reference to `videobuf_dvb_alloc_frontend' cx88-mpeg.c:(.devinit.text+0x268ea): undefined reference to `videobuf_dvb_dealloc_frontends' With those configs: CONFIG_VIDEO_CX88=y CONFIG_VIDEO_CX88_BLACKBIRD=y CONFIG_VIDEO_CX88_DVB=m CONFIG_DVB_CORE=m After carefully examining the code, with the current code, several cx88 drivers (cx8800, cx8802, cx88_dvb and cx88_blackbird) should be compiled as a module, if one of them is marked as such. Just fixing Kconfig could create a very complex set of rules. Also, this hides a problem with the current approach where the dvb functionality weren't confined inside dvb module. What happens is that: - cx88-i2c (part of cx8800) has some special rules if DVB; - cx88-mpeg (cx8802 module) has also part of DVB init code; - cx88-dvb has the rest of the dvb code; - cx88-blackbird can be used with cx88-mpeg, having cx88-dvb or not. So, instead of doing some tricks at Kconfig and wait for a next breakage, this patch moves the dvb code inside cx88-i2c and cx88-mpeg into cx88-dvb. Another problem is that cx8802 were being compiled, even without cx88-dvb and cx88-blackbird modules. While on this code, let's fix also a reported problem: http://www.linuxtv.org/pipermail/linux-dvb/2009-January/031225.html A solution for the issue were proposed here: http://www.mail-archive.com/linux-media@vger.kernel.org/msg00021.html Thanks to Randy, Andy, Gregoire and Thomas for helping us to detect and solve the issues. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Randy Dunlap <randy.dunlap@oracle.com>: With CONFIG_INPUT=m and CONFIG_DVB_DM1105=y: drivers/built-in.o: In function `input_sync': dm1105.c:(.text+0x120c33): undefined reference to `input_event' drivers/built-in.o: In function `dm1105_emit_key': dm1105.c:(.text+0x120c6c): undefined reference to `input_event' dm1105.c:(.text+0x120c82): undefined reference to `input_event' dm1105.c:(.text+0x120cb2): undefined reference to `input_event' dm1105.c:(.text+0x120cd1): undefined reference to `input_event' drivers/built-in.o: In function `dm1105_ir_init': (.devinit.text+0xd8ae): undefined reference to `input_allocate_device' drivers/built-in.o: In function `dm1105_ir_init': (.devinit.text+0xd9f6): undefined reference to `input_register_device' drivers/built-in.o: In function `dm1105_ir_init': (.devinit.text+0xda09): undefined reference to `input_free_device' drivers/built-in.o: In function `dm1105_ir_exit': (.devexit.text+0xcde): undefined reference to `input_unregister_device' This is due to the lack of a dependency between dm1105 and CONFIG_INPUT Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: -
Julia Lawall authored
This patch extends 13417982 by using usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk, and usb_endpoint_xfer_int in the negated case as well. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\)) + !usb_endpoint_xfer_control(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\)) + !usb_endpoint_xfer_isoc(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\)) + !usb_endpoint_xfer_bulk(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\)) + !usb_endpoint_xfer_int(epd) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Michael Krufky authored
Don't call tda8290_init_tuner unless we have either a TDA8275 or TDA8275A present. Calling this function will cause a TDA18271 to get sick, so we should only call it when needed. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/v4l2-device.c:32:2: warning: Using plain integer as NULL pointer /home/v4l/master/v4l/v4l2-device.c:64:2: warning: Using plain integer as NULL pointer Signed-off-by: -
Mauro Carvalho Chehab authored
anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Signed-off-by: -
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/tda8290.c:233:7: warning: symbol 'i' shadows an earlier one /home/v4l/master/v4l/tda8290.c:178:3: warning: symbol 'fm_mode' was not declared. Should it be static? Signed-off-by: -
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/dvb_frontend.c:838:19: warning: symbol 'dtv_cmds' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1035:6: warning: symbol 'dtv_property_dump' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1066:5: warning: symbol 'is_legacy_delivery_system' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1080:6: warning: symbol 'dtv_property_cache_sync' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1132:6: warning: symbol 'dtv_property_legacy_params_sync' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1187:6: warning: symbol 'dtv_property_adv_params_sync' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1222:6: warning: symbol 'dtv_property_cache_submit' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1253:5: warning: symbol 'dtv_property_process_get' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1362:5: warning: symbol 'dtv_property_process_set' was not declared. Should it be static? Signed-off-by: -
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/em28xx-core.c:396:25: warning: symbol 'outputs' was not declared. Should it be static? /home/v4l/master/v4l/em28xx-input.c:324:6: warning: symbol 'em28xx_ir_start' was not declared. Should it be static? /home/v4l/master/v4l/em28xx-cards.c:1925:5: warning: symbol 'em28xx_init_dev' was not declared. Should it be static? Signed-off-by: -
Eric Miao authored
1. now pxa_camera.c uses ioremap() for register access, pxa_camera.h is totally useless. Remove it. 2. <asm/dma.h> does no longer include <mach/dma.h>, include the latter file explicitly delete mode 100644 drivers/media/video/pxa_camera.h Signed-off-by:
Eric Miao <eric.miao@marvell.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Not all architectures provide clear_user_page(), but clear_user_highpage() is available everywhere at least via the compatibility inline function. Is this the "trivial patch" that's required for these two drivers? Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
- 07 Jan, 2009 18 commits
-
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix possible recursive rq->lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (98 commits) PCI PM: Put PM callbacks in the order of execution PCI PM: Run default PM callbacks for all devices using new framework PCI PM: Register power state of devices during initialization PCI PM: Call pci_fixup_device from legacy routines PCI PM: Rearrange code in pci-driver.c PCI PM: Avoid touching devices behind bridges in unknown state PCI PM: Move pci_has_legacy_pm_support PCI PM: Power-manage devices without drivers during suspend-resume PCI PM: Add suspend counterpart of pci_reenable_device PCI PM: Fix poweroff and restore callbacks PCI: Use msleep instead of cpu_relax during ASPM link retraining PCI: PCIe portdrv: Add kerneldoc comments to remining core funtions PCI: PCIe portdrv: Rearrange code so that related things are together PCI: PCIe portdrv: Fix suspend and resume of PCI Express port services PCI: PCIe portdrv: Add kerneldoc comments to some core functions x86/PCI: Do not use interrupt links for devices using MSI-X net: sfc: Use pci_clear_master() to disable bus mastering PCI: Add pci_clear_master() as opposite of pci_set_master() PCI hotplug: remove redundant test in cpq hotplug PCI: pciehp: cleanup register and field definitions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits) wimax/i2400m: add CREDITS and MAINTAINERS entries wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install i2400m: Makefile and Kconfig i2400m/SDIO: TX and RX path backends i2400m/SDIO: firmware upload backend i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends i2400m/SDIO: header for the SDIO subdriver i2400m/USB: TX and RX path backends i2400m/USB: firmware upload backend i2400m/USB: probe/disconnect, dev init/shutdown and reset backends i2400m/USB: header for the USB bus driver i2400m: debugfs controls i2400m: various functions for device management i2400m: RX and TX data/control paths i2400m: firmware loading and bootrom initialization i2400m: linkage to the networking stack i2400m: Generic probe/disconnect, reset and message passing i2400m: host/device procotol and core driver definitions i2400m: documentation and instructions for usage wimax: Makefile, Kconfig and docbook linkage for the stack ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-asyncLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async: async: don't do the initcall stuff post boot bootchart: improve output based on Dave Jones' feedback async: make the final inode deletion an asynchronous event fastboot: Make libata initialization even more async fastboot: make the libata port scan asynchronous fastboot: make scsi probes asynchronous async: Asynchronous function calls to speed up kernel boot
-
David Miller authored
Due to changeset ba84be23 ("remove linux/hardirq.h from asm-generic/local.h") the sparc64 build started failing on drivers/base/topology.c: drivers/base/topology.c: In function ‘show_physical_package_id’: drivers/base/topology.c:103: error: implicit declaration of function ‘cpu_data’ drivers/base/topology.c:103: error: request for member ‘proc_id’ in something not a structure or union drivers/base/topology.c: In function ‘show_core_id’: drivers/base/topology.c:106: error: request for member ‘core_id’ in something not a structure or union Adding the obvious fix of including asm/cpudata.h into asm/topology.h on sparc64 doesn't fix it, in fact it makes things worse because of the header file dependency chain: linux/gfp.h --> linux/mmzone.h --> linux/topology.h --> asm/topology.h --> asm/cpudata.h --> linux/percpu.h --> linux/slab.h which results in: include/linux/slub_def.h: In function ‘kmalloc_large’: include/linux/slub_def.h:209: error: implicit declaration of function ‘__get_free_pages’ include/linux/slub_def.h:209: error: ‘__GFP_COMP’ undeclared (first use in this function) include/linux/slub_def.h:209: error: (Each undeclared identifier is reported only once include/linux/slub_def.h:209: error: for each function it appears in.) include/linux/slub_def.h:209: warning: cast to pointer from integer of different size The simplest thing to do is to add yet another one-off hack like parts of the guilty changeset did, by putting an explicit linux/hardirq.h include into drivers/base/topology.c Signed-off-by:
-
Benny Halevy authored
Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
refactor the nfs4 server lock code to use last_byte_offset to compute the last byte covered by the lock. Check for overflow so that the last byte is set to NFS4_MAX_UINT64 if offset + len wraps around. Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate. Signed-off-by:
-
Marc Eshel authored
Signed-off-by:
-
Benny Halevy authored
There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c Signed-off-by:
-
Benny Halevy authored
Signed-off-by:
-
Dean Hildebrand authored
Signed-off-by:
Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by:
-
Steve Dickson authored
When determining the fsid_type in fh_compose(), the setting of the FID via fsid= export option needs to take precedence over using the UUID device id. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Tom Tucker authored
A race between svc_revisit and svc_delete_xprt can result in deferred requests holding references on a transport that can never be recovered because dead transports are not enqueued for subsequent processing. Check for XPT_DEAD in revisit to clean up completing deferrals on a dead transport and sweep a transport's deferred queue to do the same for queued but unprocessed deferrals. Signed-off-by:
Tom Tucker <tom@opengridcomputing.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation kbuild: add a symlink to the source for separate objdirs kconfig: add script to manipulate .config files on the command line kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope bootchart: improve output based on Dave Jones' feedback fix modules_install via NFS qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types
-
Wolfram Sang authored
The text always mentions ...bin.o_shipped, just the example makefiles actually use ...bin_shipped. It was corrected in one place some time ago, these ones seem to have been forgotten. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org>
-
