In the future we will allow the uevent type to be written to the uevent
file to trigger the different types of uevents.  But for now, as we only
support the ADD event, warn if userspace tries to write anything else to
this file.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This allows sysfs to show the environment variables that are available
if the uevent happens.  This lets userspace not have to cache all of
this information as the kernel already knows it.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It isn't used at all by the driver core anymore, and the few usages of
it within the kernel have now all been fixed as most of them were using
it incorrectly.  So remove it.

Now the whole struct subsys can be removed from the system, but that's
for a later patch...

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

the current driver tree contains the removal of subsys.rwsem.
Unfortunately, this breaks qeth. However, it should be no problem to
fix the walking of the devices for /proc/qeth:

No need to take subsys.rwsem during walking the devices,
driver_find_devices() should already suffice.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so the use of
it in the phy code doesn't make any sense.  They might possibly
want to use a local lock, but I am unsure about that.

Cc: netdev <netdev@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so the use of
it in the ieee1394 code doesn't make any sense.  They might possibly
want to use a local lock, but as most of these operations are already
protected by a local lock, it really doesn't look like it would be
needed.

Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel <linux1394-devel@lists.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so the use of
it in the ide-proc code of it doesn't make any sense.  Perhaps a local
lock might be needed, but I do not really think so.

Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: linux ide <linux-ide@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so there is
no point in trying to access it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so there is
no point in trying to access it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The rwsem is not used to protect anything, so the use of it by the PNP
subsystem isn't really useful, and it's doubtful if it really did anything or
not.  So I've removed it.

Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The driver core stopped using the rwsem a long time ago, yet the USB
core still grabbed the lock, thinking it protected something.  This
patch removes that useless use.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: linux-usb-devel <linux-usb-devel@lists.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SCSI was using the incorrect lock to protect walking the list of all
devices in the class.  This patch fixes this.

Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This lock is never used by the rest of the driver core, so the fact that
we are grabbing it here means it isn't correct...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We leak a reference if we attempt to add a kobject with no name.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Collapses a do..while() loop within an if() to a simple while() loop for 
simplicity and readability.
Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Driver core: add suspend() and resume() to struct device_type

In cases when there are devices of different types in the same class
we can't use class's implementation of suspend and resume methods and
we need to add them to struct device_type instead.

Also fix error handling in resume code (we should not try to call
class's resume method iof bus's resume method for the device failed.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Make use of add_uevent_var() instead of (often incorrectly) open coding it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Eric Rannaud <eric.rannaud@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use uevent_suppress instead of returning an error code in
firmware_uevent(). Get rid of the now unneeded FW_STATUS_READY
and FW_STATUS_READY_NOHOTPLUG.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Suppress uevents for devices if uevent_suppress is set via
dev_uevent_filter(). This makes the driver core suppress all device
uevents, not just the add event in device_add().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Provide rename event for when we rename network devices.
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 

some atomic operations are only atomic, not ordered. Thus a CPU is allowed
to reorder memory references to an object to before the reference is
obtained. This fixes it.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The completion in the driver release path is due to ancient history in
the _very_ early 2.5 days when we were not tracking the module reference
count of attributes.  It is not needed at all and can be removed.

Note, we now have an empty release function for the driver structure.
This is due to the fact that drivers are statically allocated in the
system at this point in time, something which I want to change in the
future.  But remember, drivers are really code, which is reference
counted by the module, unlike devices, which are data and _must_ be
reference counted properly in order to work correctly.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't fail bus_attach_device() if the device cannot be bound.

If dev->driver has been specified, reset it to NULL if device_bind_driver()
failed and add the device as an unbound device.  As a result,
bus_attach_device() now cannot fail, and we can remove some checking from
device_add().

Also remove an unneeded check in bus_rescan_devices_helper().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/powerpc/kernel/of_platform.c:479: error: unknown field `multithread_probe' specified in initializer

Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Make multithreaded probing work per subsystem instead of per driver.

It doesn't make much sense to probe the same device for multiple drivers in
parallel (after all, only one driver can bind to the device).  Instead, create
a probing thread for each device that probes the drivers one after another. 
Also make the decision to use multi-threaded probe per bus instead of per
device and adapt the pci code.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 - correct function name in comments
 - parrent assignment does metter only inside "if" block, 
   so move it inside this block.
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If "name" of a device_type is specified, the uevent will
contain the device_type name in the DEVTYPE variable.
This helps userspace to distingiush between different types
of devices, belonging to the same subsystem.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Driver core: use attribute groups in struct device_type

Attribute groups are more flexible than attribute lists
(an attribute list can be represented by anonymous group)
so switch struct device_type to use them.

Also rework attribute creation for devices so that they all
cleaned up properly in case of errors.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We get two per-bus sysfs files:
  ls-l /sys/subsystem/usb
  drwxr-xr-x 2 root root    0 2007-02-16 16:42 devices
  drwxr-xr-x 7 root root    0 2007-02-16 14:55 drivers
  -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe
  --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe

The flag "drivers_autoprobe" controls the behavior of the bus to bind
devices by default, or just initialize the device and leave it alone.

The command "drivers_probe" accepts a bus_id and the bus tries to bind a
driver to this device.

Systems who want to control the driver binding with udev, switch off the
bus initiated probing:
  echo 0 > /sys/subsystem/usb/drivers_autoprobe
  echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe
  ...

and initiate the probing with udev rules like:
  ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel"
  ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel"
  ...

Custom driver binding can happen in earlier rules by something like:
  ACTION=="add", SUBSYSTEM=="usb", \
  ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \
  ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel"

This is intended to solve the modprobe.conf mess with "install-rules", custom
bind/unbind-scripts and all the weird things people invented over the years.
It should also provide the functionality "libusual" was supposed to do.

With udev, one can just write a udev rule to drive all USB-disks at the
third port of USB-hub by the "ub" driver, and everything else by
usb-storage. One can also instruct udev to bind different wireless
drivers to identical cards - just selected by the pcmcia slot-number, and
whatever ...

To use the mentioned rules, it needs udev version 106, to be able to
write ATTR{}="$kernel" to sysfs files.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

As the new-style class devices (as opposed to old-style struct
class_device) are becoming more widely used, I noticed that the
dev_printk-based functions are not working properly with these.
New-style class devices have no driver nor bus, almost by definition,
and as a result dev_driver_string(), which is used as the first
parameter of dev_printk, resolves to an empty string. This causes
entries like the following to show in my logs:

 i2c-2: adapter [SMBus stub driver] registered

Notice the unaesthetical leading whitespace. In order to fix this
problem, I suggest that we extend dev_driver_string to deal with
new-style class devices:
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

  - uses a kset in "struct class" to keep track of all directories
    belonging to this class
  - merges with the /sys/devices/virtual logic.
  - removes the namespace-dir if the last member of that class
    leaves the directory.

There may be locking or refcounting fixes left, I stopped when it seemed
to work with network and sound modules. :)

From: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 - At the moment we jump here device was't added to
   dev->class->devices list yet.
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'e1000-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: FIX: Stop raw interrupts disabled nag from RT
  e1000: FIX: firmware handover bits
  e1000: FIX: be ready for incoming irq at pci_request_irq

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (49 commits)
  IB: Set class_dev->dev in core for nice device symlink
  IB/ehca: Implement modify_port
  IB/umad: Clarify documentation of transaction ID
  IPoIB/cm: spin_lock_irqsave() -> spin_lock_irq() replacements
  IB/mad: Change SMI to use enums rather than magic return codes
  IB/umad: Implement GRH handling for sent/received MADs
  IB/ipoib: Use ib_init_ah_from_path to initialize ah_attr
  IB/sa: Set src_path_bits correctly in ib_init_ah_from_path()
  IB/ucm: Simplify ib_ucm_event()
  RDMA/ucma: Simplify ucma_get_event()
  IB/mthca: Simplify CQ cleaning in mthca_free_qp()
  IB/mthca: Fix mthca_write_mtt() on HCAs with hidden memory
  IB/mthca: Update HCA firmware revisions
  IB/ipath: Fix WC format drift between user and kernel space
  IB/ipath: Check that a UD work request's address handle is valid
  IB/ipath: Remove duplicate stuff from ipath_verbs.h
  IB/ipath: Check reserved memory keys
  IB/ipath: Fix unit selection when all CPU affinity bits set
  IB/ipath: Don't allow QPs 0 and 1 to be opened multiple times
  IB/ipath: Disable IB link earlier in shutdown sequence
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)
  [SCSI] SUNESP: Complete driver rewrite to version 2.0
  [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
  [SPARC]: device_node name constification fallout
  [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.
  [SPARC64]: Add generic iommu and strbuf structs to iommu.h
  [SPARC64]: Consolidate {sbus,pci}_iommu_arena.
  [SPARC]: Make device_node name and type const
  [SPARC64]: constify some paramaters of OF routines
  [TIGON3]: of_get_property() returns const.
  [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.
  [SPARC64]: Document and fix calculation of pages_avail.
  [SPARC64]: Make sure pbm->prom_node is setup easly enough in psycho.c
  [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().
  [SPARC64]: Add proper header file extern for cmdline_memory_size.
  [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()
  [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c
  [SPARC64]: Give move verbose show_mem() output just like i386.
  [SPARC64]: Mark show_mem() printk's with KERN_INFO.
  [SPARC64]: Kill kvaddr_to_phys() and friends.
  [SPARC64]: Privatize sun4u_get_pte() and fix name.
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (448 commits)
  [IPV4] nl_fib_lookup: Initialise res.r before fib_res_put(&res)
  [IPV6]: Fix thinko in ipv6_rthdr_rcv() changes.
  [IPV4]: Add multipath cached to feature-removal-schedule.txt
  [WIRELESS] cfg80211: Clarify locking comment.
  [WIRELESS] cfg80211: Fix locking in wiphy_new.
  [WEXT] net_device: Don't include wext bits if not required.
  [WEXT]: Misc code cleanups.
  [WEXT]: Reduce inline abuse.
  [WEXT]: Move EXPORT_SYMBOL statements where they belong.
  [WEXT]: Cleanup early ioctl call path.
  [WEXT]: Remove options.
  [WEXT]: Remove dead debug code.
  [WEXT]: Clean up how wext is called.
  [WEXT]: Move to net/wireless
  [AFS]: Eliminate cmpxchg() usage in vlocation code.
  [RXRPC]: Fix pointers passed to bitops.
  [RXRPC]: Remove bogus atomic_* overrides.
  [AFS]: Fix u64 printing in debug logging.
  [AFS]: Add "directory write" support.
  [AFS]: Implement the CB.InitCallBackState3 operation.
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits)
  [MIPS] Don't force frame pointers for lockdep on MIPS
  [MIPS] update vr41xx Kconfig
  [MIPS] remove 2 select entries for VR41xx
  [MIPS] rename VR41XX to VR4100 series
  [MIPS] Use DEFINE_SPINLOCK instead of SPIN_LOCK_UNLOCKED.
  [MIPS] Replace old fashioned "__typeof" with "__typeof__".
  [MIPS] Remove unused _THREAD_SIZE_ORDER from asm-offset.c.
  [MIPS] Change PCI host bridge setup/resources
  [MIPS] Register PCI host bridge resource earlier
  [MIPS] Remove pnx8550-v2pci_defconfig
  [MIPS] Add bcm1480 ZBus trace support, fix wait related bugs
  [MIPS] Updated Sibyte headers
  [MIPS] Remove unused argument from kunmap_coherent().
  [MIPS] Malta: Delete unused prototype of mips_timer_interrupt.
  [MIPS] Select ZONE_DMA only if GENERIC_ISA_DMA selected
  [MIPS] MIPS Tech: Get rid of volatile in core code.
  [MIPS] IP22: Get rid of volatile in IP22 core code.
  [MIPS] JMR3927 cleanup
  [MIPS] merge GT64111 PCI routines and GT64120 PCI_0 routines
  [MIPS] Cobalt: Split PCI codes from setup.c
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (38 commits)
  [S390] SPIN_LOCK_UNLOCKED cleanup in drivers/s390
  [S390] Clean up smp code in preparation for some larger changes.
  [S390] Remove debugging junk.
  [S390] Switch etr from tasklet to workqueue.
  [S390] split page_test_and_clear_dirty.
  [S390] Processor degradation notification.
  [S390] vtime: cleanup per_cpu usage.
  [S390] crypto: cleanup.
  [S390] sclp: fix coding style.
  [S390] vmlogrdr: stop IUCV connection in vmlogrdr_release.
  [S390] sclp: initialize early.
  [S390] ctc: kmalloc->kzalloc/casting cleanups.
  [S390] zfcpdump support.
  [S390] dasd: Add ipldev parameter.
  [S390] dasd: Add sysfs attribute status and generate uevents.
  [S390] Improved kernel stack overflow checking.
  [S390] Get rid of console setup functions.
  [S390] No execute support cleanup.
  [S390] Minor fault path optimization.
  [S390] Use generic bug.
  ...

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: (21 commits)
  [AVR32] Fix compile error with gcc 4.1
  avr32: remove unneeded cast in atomic.h
  AVR32: Remove useless config option "GENERIC_BUST_SPINLOCK".
  [AVR32] Optimize the TLB miss handler
  [AVR32] Board code for ATNGW100
  [AVR32] Use memcpy/memset in memcpy_{from,to}_io and memset_io
  [AVR32] Get rid of board_setup_fbmem()
  [AVR32] Reserve framebuffer memory in early_parse_fbmem()
  [AVR32] Simplify early handling of memory regions
  [AVR32] Move setup_bootmem() from mm/init.c to kernel/setup.c
  [AVR32] Make I/O access macros work with external devices
  [AVR32] Fix NMI handler
  [AVR32] Clean up exception handling code
  [AVR32] Clean up cpu identification and add features bitmap
  [AVR32] Clean up asm/sysreg.h
  [AVR32] Don't enable clocks with no users
  [AVR32] Put cpu in sleep 0 when idle.
  [AVR32] Change system timer from count-compare to Timer/Counter 0
  [AVR32] Add mach-specific Kconfig
  [AVR32] Add nwait and tdf parameters to SMC configuration
  ...

Do this really early in the 2.6.22-rc series, so that we'll get
feedback.  And don't change by half measures.  Just cut the default
dirty limit to a quarter of what it was, and see if anybody even
notices.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>