- 23 Jun, 2006 40 commits
-
-
Michal Ludvig authored
New CPU flags for next generation of crypto engine as found in VIA C7 processors. Signed-off-by:
Michal Ludvig <michal@logix.cz> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Sometimes thread_info and task_struct get out-of-sync with each other. Printing task.thread_info in show_registers() can help spot this. And when task_struct is corrupt then task.comm can contain garbage, so only print as many characters as it can hold. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Roman Zippel authored
An immediate operand can't be the destination of the cmpl instruction, so exclude it. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Cc: Mattia Dongili <malattia@linux.it> Signed-off-by:
-
Zachary Amsden authored
Never allow int3 traps from V8086 mode to enter the kprobes handler. Signed-off-by:
Zachary Amsden <zach@vmware.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Chuck Ebbert authored
We need to check for vm86 mode first before looking at selector privilege bits. Segment limit is always base + 64k and only the low 16 bits of EIP are significant in vm86 mode. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Andreas Mohr authored
Use proper defines instead of open-coded values. Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Andreas Mohr authored
constify structs and add one __initdata. Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
-
Andreas Mohr authored
PCI code was outside of CONFIG_PCI, add __initdata at cyrix_55x0 (since accessed within __init function only). Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
-
Chuck Ebbert authored
The i386 page fault handler does not allow enough slack when checking for userspace access below the current stack pointer. This prevents use of the enter instruction by user code. Fix this by allowing enough slack for "enter $65535,$31" to execute. Problem reported by Tomasz Malesinski <tmal@mimuw.edu.pl> Tested using this program, based on the original from Tomasz: .file "ovflow.S" .version "01.01" gcc2_compiled.: .section .rodata .LC0: .string "asdf\n" .text .align 4 .globl main .type main,@function main: nest_level=0 .rept 30 enter $0,$nest_level nest_level=nest_level+1 .endr enter $65535,$30 enter $65535,$31 addl $-12,%esp pushl $.LC0 call printf addl $16,%esp .L2: .rept 32 leave .endr ret .Lfe1: .size main,.Lfe1-main .ident "GCC: (GNU) 2.95.4 20011002 (Debian prerelease)" Signed-off-by:
-
Zhang Yanmin authored
On i386, kernel irq balance doesn't work. 1) In function do_irq_balance, after kernel finds the min_loaded cpu but before calling set_pending_irq to really pin the selected_irq to the target cpu, kernel does a cpus_and with irq_affinity[selected_irq]. Later on, when the irq is acked, kernel would calls move_native_irq=>desc->handler->set_affinity to change the irq affinity. However, every function pointed by hw_interrupt_type->set_affinity(unsigned int irq, cpumask_t cpumask) always changes irq_affinity[irq] to cpumask. Next time when recalling do_irq_balance, it has to do cpu_ands again with irq_affinity[selected_irq], but irq_affinity[selected_irq] already becomes one cpu selected by the first irq balance. 2) Function balance_irq in file arch/i386/kernel/io_apic.c has the same issue. [akpm@osdl.org: cleanups] Signed-off-by:Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
-
Linus Torvalds authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Ingo Molnar authored
If CONFIG_FRAME_POINTERS is enabled, and one does a dump_stack() during early SMP init, an infinite stackdump and a bootup hang happens: [<c0104e7f>] show_trace+0xd/0xf [<c0104e96>] dump_stack+0x15/0x17 [<c01440df>] save_trace+0xc3/0xce [<c014527d>] mark_lock+0x8c/0x4fe [<c0145df5>] __lockdep_acquire+0x44e/0xaa5 [<c0146798>] lockdep_acquire+0x68/0x84 [<c1048699>] _spin_lock+0x21/0x2f [<c010d918>] prepare_set+0xd/0x5d [<c010daa8>] generic_set_all+0x1d/0x201 [<c010ca9a>] mtrr_ap_init+0x23/0x3b [<c010ada8>] identify_cpu+0x2a7/0x2af [<c01192a7>] smp_store_cpu_info+0x2f/0xb4 [<c01197d0>] start_secondary+0xb5/0x3ec [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [...] Due to "end_of_stack_stop_unwind_function" recursing back to itself in the EBP stackframe-walker. So avoid this type of recursion when walking the stack . Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jan Beulich authored
When multiple updates matching a given CPU are found in the update file, the action taken by the microcode update driver was inappropriate: - when lower revision microcode was found before matching or higher revision one, the driver would needlessly complain that it would not downgrade the CPU - when microcode matching the currently installed revision was found before newer revision code, no update would actually take place To change this behavior, the driver now concludes about possibly updates and issues messages only when the entire input was parsed. Additionally, this adds back (in different places, and conditionalized upon a new module option) some messages removed by a previous patch. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Tigran Aivazian <tigran_aivazian@symantec.com> Signed-off-by:
-
Alexey Dobriyan authored
Only drm, framebuffer, mtrr parts + misc files here and there. Signed-off-by:
-
Andreas Mohr authored
- avoid expensive modulo (integer division) which happened since APM_MAX_EVENTS is 20 (non-power-of-2) - kill compiler warnings by initializing two variables - add __read_mostly to some important static variables that are read often (by idle loop etc.) - constify several structures Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Hiro Yoshioka authored
Use the x86 cache-bypassing copy instructions for copy_from_user(). Some performance data are Total of GLOBAL_POWER_EVENTS (CPU cycle samples) 2.6.12.4.orig 1921587 2.6.12.4.nt 1599424 1599424/1921587=83.23% (16.77% reduction) BSQ_CACHE_REFERENCE (L3 cache miss) 2.6.12.4.orig 57427 2.6.12.4.nt 20858 20858/57427=36.32% (63.7% reduction) L3 cache miss reduction of __copy_from_user_ll samples % 37408 65.1412 vmlinux __copy_from_user_ll 23 0.1103 vmlinux __copy_user_zeroing_intel_nocache 23/37408=0.061% (99.94% reduction) Top 5 of 2.6.12.4.nt Counted GLOBAL_POWER_EVENTS events (time during which processor is not stopped) with a unit mask of 0x01 (mandatory) count 100000 samples % app name symbol name 128392 8.0274 vmlinux __copy_user_zeroing_intel_nocache 64206 4.0143 vmlinux journal_add_journal_head 59746 3.7355 vmlinux do_get_write_access 47674 2.9807 vmlinux journal_put_journal_head 46021 2.8774 vmlinux journal_dirty_metadata pattern9-0-cpu4-0-09011728/summary.out Counted BSQ_CACHE_REFERENCE events (cache references seen by the bus unit) with a unit mask of 0x3f (multiple flags) count 3000 samples % app name symbol name 69755 4.2861 vmlinux __copy_user_zeroing_intel_nocache 55685 3.4215 vmlinux journal_add_journal_head 52371 3.2179 vmlinux __find_get_block 45504 2.7960 vmlinux journal_put_journal_head 36005 2.2123 vmlinux journal_stop pattern9-0-cpu4-0-09011744/summary.out Counted BSQ_CACHE_REFERENCE events (cache references seen by the bus unit) with a unit mask of 0x200 (read 3rd level cache miss) count 3000 samples % app name symbol name 1147 5.4994 vmlinux journal_add_journal_head 881 4.2240 vmlinux journal_dirty_data 872 4.1809 vmlinux blk_rq_map_sg 734 3.5192 vmlinux journal_commit_transaction 617 2.9582 vmlinux radix_tree_delete pattern9-0-cpu4-0-09011731/summary.out iozone results are original 2.6.12.4 CPU time = 207.768 sec cache aware CPU time = 184.783 sec (three times run) 184.783/207.768=88.94% (11.06% reduction) original: pattern9-0-cpu4-0-08191720/iozone.out: CPU Utilization: Wall time 45.997 CPU time 64.527 CPU utilization 140.28 % pattern9-0-cpu4-0-08191741/iozone.out: CPU Utilization: Wall time 46.878 CPU time 71.933 CPU utilization 153.45 % pattern9-0-cpu4-0-08191743/iozone.out: CPU Utilization: Wall time 45.152 CPU time 71.308 CPU utilization 157.93 % cache awre: pattern9-0-cpu4-0-09011728/iozone.out: CPU Utilization: Wall time 44.842 CPU time 62.465 CPU utilization 139.30 % pattern9-0-cpu4-0-09011731/iozone.out: CPU Utilization: Wall time 44.718 CPU time 59.273 CPU utilization 132.55 % pattern9-0-cpu4-0-09011744/iozone.out: CPU Utilization: Wall time 44.367 CPU time 63.045 CPU utilization 142.10 % Signed-off-by:
Hiro Yoshioka <hyoshiok@miraclelinux.com> Signed-off-by:
-
Yoichi Yuasa authored
mremap syscall takes 5 arguments. Fixed by Ralf Baechle. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
-
Sergei Shtylyov authored
Add missing PSC #define's required for the drivers using PSC on DBAu1550 board (also fixing Au1550 PSC3 address) and all Au1200-based boards as well. Make the OSS driver use the correct PSC definitions fo each board. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Al Viro authored
Remove _syscall invocations that aren't used in the kernel. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Al Viro authored
Remove duplicate EXPORT_SYMBOL annotations from the FRV arch. Signed-off-by:
-
Al Viro authored
The memcpy_fromio() function should have a const qualifier on its source pointer. Signed-off-by:
-
Al Viro authored
The ieee1394 assumes it may make direct use of ->count in the semaphore structure. Signed-off-by:
-
Al Viro authored
Clean up the FRV arch's xchg() function. Signed-off-by:
-
Al Viro authored
The FRV arch doesn't currently support initrd, so it should be disabled automatically for the moment. Signed-off-by:
-
Al Viro authored
Disable Ext2 XIP if the kernel is configured in no-MMU mode as the former won't build. Signed-off-by:
-
Al Viro authored
The FRV arch should use fstatat64 not newfstatat. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Add __user annotations to binfmt_elf_fdpic. Signed-off-by:
-
Al Viro authored
Add __user annotations to FRV-specific sysctl stuff. Signed-off-by:
-
Al Viro authored
Add annotations to the FRV signal handling for sparse. Signed-off-by:
-
Al Viro authored
Add annotations to the FRV I/O handling functions for sparse. Signed-off-by:
-
Al Viro authored
Add general annotations to the FRV arch for sparse. Signed-off-by:
-
David Quigley authored
This patch inserts security_task_movememory hook calls into memory management code to enable security modules to mediate this operation between tasks. Since the last posting, the hook has been renamed following feedback from Christoph Lameter. Signed-off-by:
David Quigley <dpquigl@tycho.nsa.gov> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
James Morris <jmorris@namei.org> Cc: Andi Kleen <ak@muc.de> Acked-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
David Quigley authored
This patch adds new security hook, task_movememory, to be called when memory owened by a task is to be moved (e.g. when migrating pages to a this hook is identical to the setscheduler implementation, but a separate hook introduced to allow this check to be specialized in the future if necessary. Since the last posting, the hook has been renamed following feedback from Christoph Lameter. Signed-off-by:
-
