- 08 Apr, 2008 5 commits
-
-
David S. Miller authored
If print_mac() is used inside of a pr_debug() the compiler can't see that the call is redundant so still performs it even of pr_debug() ends up being a nop. So don't use print_mac() in such cases in hot code paths, use MAC_FMT et al. instead. As noted by Joe Perches, pr_debug() could be modified to handle this better, but that is a change to an interface used by the entire kernel and thus needs to be validated carefully. This here is thus the less risky fix for 2.6.25 Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
MTU probe can cause some remedies for FRTO because the normal packet ordering may be violated allowing FRTO to make a wrong decision (it might not be that serious threat for anything though). Thus it's safer to not run FRTO while MTU probe is underway. It seems that the basic FRTO variant should also look for an skb at probe_seq.start to check if that's retransmitted one but I didn't implement it now (plain seqno in window check isn't robust against wraparounds). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
This fixes Bugzilla #10384 tcp_simple_retransmit does L increment without any checking whatsoever for overflowing S+L when Reno is in use. The simplest scenario I can currently think of is rather complex in practice (there might be some more straightforward cases though). Ie., if mss is reduced during mtu probing, it may end up marking everything lost and if some duplicate ACKs arrived prior to that sacked_out will be non-zero as well, leading to S+L > packets_out, tcp_clean_rtx_queue on the next cumulative ACK or tcp_fastretrans_alert on the next duplicate ACK will fix the S counter. More straightforward (but questionable) solution would be to just call tcp_reset_reno_sack() in tcp_simple_retransmit but it would negatively impact the probe's retransmission, ie., the retransmissions would not occur if some duplicate ACKs had arrived. So I had to add reno sacked_out reseting to CA_Loss state when the first cumulative ACK arrives (this stale sacked_out might actually be the explanation for the reports of left_out overflows in kernel prior to 2.6.23 and S+L overflow reports of 2.6.24). However, this alone won't be enough to fix kernel before 2.6.24 because it is building on top of the commit 1b6d427b ([TCP]: Reduce sacked_out with reno when purging write_queue) to keep the sacked_out from overflowing. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
Fixes a long-standing bug which makes NewReno recovery crippled. With GSO the whole head skb was marked as LOST which is in violation of NewReno procedure that only wants to mark one packet and ended up breaking our TCP code by causing counter overflow because our code was built on top of assumption about valid NewReno procedure. This manifested as triggering a WARN_ON for the overflow in a number of places. It seems relatively safe alternative to just do nothing if tcp_fragment fails due to oom because another duplicate ACK is likely to be received soon and the fragmentation will be retried. Special thanks goes to Soeren Sonnenburg <kernel@nn7.de> who was lucky enough to be able to reproduce this so that the warning for the overflow was hit. It's not as easy task as it seems even if this bug happens quite often because the amount of outstanding data is pretty significant for the mismarkings to lead to an overflow. Because it's very late in 2.6.25-rc cycle (if this even makes in time), I didn't want to touch anything with SACK enabled here. Fragmenting might be useful for it as well but it's more or less a policy decision rather than mandatory fix. Thus there's no need to rush and we can postpone considering tcp_fragment with SACK for 2.6.26. In 2.6.24 and earlier, this very same bug existed but the effect is slightly different because of a small changes in the if conditions that fit to the patch's context. With them nothing got lost marker and thus no retransmissions happened. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
The fast retransmission can be forced locally to the rfc3517 branch in tcp_update_scoreboard instead of making such fragile constructs deeper in tcp_mark_head_lost. This is necessary for the next patch which must not have loopholes for cnt > packets check. As one can notice, readability got some improvements too because of this :-). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Apr, 2008 6 commits
-
-
David S. Miller authored
-
Al Viro authored
a) if you initialize something with le32_to_cpu(...), then |= it with host-endian and feed to cpu_to_le32(), it's most definitely *not* __le32. As sparse would've told you... b) the whole sequence is |= cpu_to_le32(host-endian constant) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
My previous section fix only turned one section problem into another section problem. This patch fixes it for real. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Harvey Harrison authored
The other if blocks don't redeclare temp, remove the redeclaration in the final if() block. drivers/net/phy/marvell.c:214:7: warning: symbol 'temp' shadows an earlier one drivers/net/phy/marvell.c:160:6: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Pavel Emelyanov authored
These entries are allocated in vlan_dev_set_egress_priority, but are never released and leaks on vlan device removal. Drop these in vlan's ->uninit callback - after the device is brought down and everyone is notified about it is going to be unregistered. Found during testing vlan netnsization patchset. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
The 5784 B step and newer chips require the PHY DSPs to be fine-tuned based on one-time programmable values stored in the chip. This is essential to achieve optimal PHY operations especially when using long cables. We also need to properly handle the 10Mbit RX bit in the CPMU_CTRL register during PHY reset. Update version to 3.89. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Apr, 2008 5 commits
-
-
Andi Kleen authored
- Let it update the state of all CPUs. The network stack goes into pains to feed the current IP addresses in, but it is not very effective if that is only done for some random CPU instead of all. So change it to feed bits into all CPUs. I decided to do that lockless because well somewhat random results are ok. v2: Drop rename so that this patch doesn't depend on x86 maintainers Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
Anycast DST entries allocated inside ipv6_dev_ac_inc are leaked when network device is stopped without removing IPv6 addresses from it. The bug has been observed in the reality on 2.6.18-rhel5 kernel. In the above case addrconf_ifdown marks all entries as obsolete and ip6_del_rt called from __ipv6_dev_ac_dec returns ENOENT. The referrence is not dropped. The fix is simple. DST entry should not keep referrence when stored in the FIB6 tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
In the other case it will be destroyed when last address will be removed from lo inside a namespace. This will break IPv6 in several places. The most obvious one is ip6_dst_ifdown. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
addrconf_ifdown is broken in respect to the usage of how parameter. This function is called with (event != NETDEV_DOWN) and (2) on the IPv6 stop. It the latter case inet6_dev from loopback device should be destroyed. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The ICMP relookup path is only meant to modify behaviour when appropriate IPsec policies are in place and marked as requiring relookups. It is certainly not meant to modify behaviour when IPsec policies don't exist at all. However, due to an oversight on the error paths existing behaviour may in fact change should one of the relookup steps fail. This patch corrects this by redirecting all errors on relookup failures to the previous code path. That is, if the initial xfrm_lookup let the packet pass, we will stand by that decision should the relookup fail due to an error. This should be safe from a security point-of-view because compliant systems must install a default deny policy so the packet would'nt have passed in that case. Many thanks to Julian Anastasov for pointing out this error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Apr, 2008 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ohci: fix 2 timers to fire at jiffies + 1s USB: Allow initialization of broken keyspan serial adapters. USB: fix bug in sg initialization in usbtest USB: serial: fix regression in Visor/Palm OS module for kernels >= 2.6.24 USB: cp2101: Add identifiers for the Telegesys ETRX2USB USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements. USB: another ehci_iaa_watchdog fix
-
Andrew Morton authored
A nasty compile error: In file included from security/keys/internal.h:16, from security/keys/sysctl.c:14: include/linux/key-ui.h: In function 'key_permission': include/linux/key-ui.h:51: error: invalid use of undefined type 'struct task_struct' apparently the compiler has decided that it needs to know sizeof(task_struct) so that it can add zero to a task_struct* (which is rather dumb of it). Getting task_struct in scope in these deeply-nested headers is scary-looking, so let's just remove the "+ 0". Cc: David Howells <dhowells@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mathieu Desnoyers authored
Markers do not mix well with CONFIG_PREEMPT_RCU because it uses preempt_disable/enable() and not rcu_read_lock/unlock for minimal intrusiveness. We would need call_sched and sched_barrier primitives. Currently, the modification (connection and disconnection) of probes from markers requires changes to the data structure done in RCU-style : a new data structure is created, the pointer is changed atomically, a quiescent state is reached and then the old data structure is freed. The quiescent state is reached once all the currently running preempt_disable regions are done running. We use the call_rcu mechanism to execute kfree() after such quiescent state has been reached. However, the new CONFIG_PREEMPT_RCU version of call_rcu and rcu_barrier does not guarantee that all preempt_disable code regions have finished, hence the race. The "proper" way to do this is to use rcu_read_lock/unlock, but we don't want to use it to minimize intrusiveness on the traced system. (we do not want the marker code to call into much of the OS code, because it would quickly restrict what can and cannot be instrumented, such as the scheduler). The temporary fix, until we get call_rcu_sched and rcu_barrier_sched in mainline, is to use synchronize_sched before each call_rcu calls, so we wait for the quiescent state in the system call code path. It will slow down batch marker enable/disable, but will make sure the race is gone. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ken'ichi Ohmichi authored
Fix the problem that makedumpfile sometimes fails on x86_64 machine. This patch adds the symbol "phys_base" to a vmcoreinfo data. The vmcoreinfo data has the minimum debugging information only for dump filtering. makedumpfile (dump filtering command) gets it to distinguish unnecessary pages, and makedumpfile creates a small dumpfile. On x86_64 kernel which compiled with CONFIG_PHYSICAL_START=0x0 and CONFIG_RELOCATABLE=y, makedumpfile fails like the following: # makedumpfile -d31 /proc/vmcore dumpfile The kernel version is not supported. The created dumpfile may be incomplete. _exclude_free_page: Can't get next online node. makedumpfile Failed. # The cause is the lack of the symbol "phys_base" in a vmcoreinfo data. If the symbol "phys_base" does not exist, makedumpfile considers an x86_64 kernel as non relocatable. As the result, makedumpfile misunderstands the physical address where the kernel is loaded, and it cannot translate a kernel virtual address to physical address correctly. To fix this problem, this patch adds the symbol "phys_base" to a vmcoreinfo data. Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
Add some locks and unlocks to some code paths. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
Unlock two grabbed locks on some paths. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Snitzer authored
NBD does not protect the nbd_device's socket from becoming NULL during receives. This closes a race with the NBD_CLEAR_SOCK ioctl (nbd-client -d) setting the nbd_device's socket to NULL right before NBD calls sock_xmit. Signed-off-by: Mike Snitzer <snitzer@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jim Meyering authored
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dmitri Vorobiev authored
This patch deletes a couple of superfluous word occurrences in the document Documentation/unaligned-memory-access.txt. Thanks to Sebastien Dugue for the remark about English usage. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ivan Kokshaysky authored
Make dma_alloc_coherent respect gfp flags (__GFP_COMP is one that matters). Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by: Michael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marc Pignat authored
Strange chars appear on the serial port when a printk and a printf happens at the same time. This is caused by the pdc sending chars while atmel_console_write (called from printk) is executing Concurent access of uart and console to the same port leads to corrupted data to be transmitted, so disable tx dma (PDC) while writing to the console. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Trimarchi authored
I found a problem related to losing data during pdc transmission in atmel_serial: connect ttyS1 with ttyS2 using a loopback cable, send 30 byte of packet from one to the other and waiting for 30 byte. On the other side just read and echo the data received. We always call atmel_tx_dma() from the tasklet regardless of what interrupt triggered it. Signed-off-by: michael <trimarchi@gandalf.sssup.it> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christian Borntraeger authored
Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb3 Author: Avi Kivity <avi@qumranet.com> Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm. only if the arch actually supports it. Signed-off-by: Avi Kivity <avi@qumranet.com> which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Avi Kivity <avi@qumranet.com> Cc: Sam Ravnborg <sam@ravnborg.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Richard Kennedy authored
Code inspection discovered in 2 places timers were being incorrectly setup using round_jiffies_relative(HZ). The timer would then fire at time (0 <= T < HZ). Fix them to use round_jiffies(jiffies + HZ); Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Clark Rawlins authored
Fixes the keyspan driver after the addition of additional checking of driver requirements introduced in usb-serial.c commit 063a2da8. The initialization of the keyspan usb_serial_driver structs were not initializing the num_interrupt_out field and the additional checking was rejecting the end point so the driver wouldn't finish initializing. This commit initializes the fields to NUM_DONT_CARE. It works for the keyspan USA-49WG and doesn't break the USA-19HS which are the two keyspan devices I have to test with. Signed-off-by: Clark Rawlins <clark.rawlins@escient.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1062) fixes a bug in the scatter-gather initialization code in the usbtest driver. When the sg-helper conversion was performed, it wasn't done correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Brad Sawatzky authored
Fixes a bug/inconsistency revealed by the additional sanity checking in commit 063a2da8 introduced in the original 2.6.24 branch. The Handspring Visor / PalmOS 4 device structure defines .num_bulk_out=2 but the usb-serial probe returns num_bulk_out=3, triggering the check in the above commit and forcing a bail out when the device (a Garmin iQue in my case) attempts to connect. The patch bumps the expected number of endpoints to 3. FWIW, this patch will probably solve the following kernel bug report for Treo users (identical symptoms, different model PalmOS units): <http://bugzilla.kernel.org/show_bug.cgi?id=10118> Signed-off-by: Brad Sawatzky <brad+kernel@swatter.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Florian Fainelli authored
This patch adds support for the Telegesys ETRX2USB which works fine with the cp2101 driver. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Tested-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Robert Spanton authored
The changes introduced in commit 063a2da8 changed the semantics of the num_interrupt_in, num_interrupt_out, num_bulk_in and num_bulk_out entries of the usb_serial_driver struct to be the number of endpoints the device has when probed. This patch changes the ti_1port_device usb_serial_driver struct to reflect this change. The single port devices only have 1 bulk_out endpoint in their initial configuration, and so this patch changes the number of other types to NUM_DONT_CARE. The same change probably needs doing to the ti_2port_device struct, but I don't have a two port device at hand. Signed-off-by: Robert Spanton <rspanton@zepler.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This patch, suggested by Alan Stern, fixes the hung USB issues on my notebook from suspend/resume cycles. It does so by eliminating some confusion about the internal state machine associated with unlinking from the EHCI async schedule ring, which caused a recent regression: http://bugzilla.kernel.org/show_bug.cgi?id=10345Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use ->ata_input_data in ide_driveid_update() ide-h8300: 32-bit I/O is unsupported ide/legacy/q40ide.c: add MODULE_LICENSE ide/legacy/macide: add MODULE_LICENSE ide/legacy/falconide.c: add MODULE_LICENSE ide/legacy/buddha.c: add MODULE_LICENSE ide/legacy/gayle.c: add MODULE_LICENSE ide/h8300/ide-h8300.c: add MODULE_LICENSE ide/cris/ide-cris.c: add MODULE_LICENSE ide/arm/ide_arm.c: add MODULE_LICENSE ide/ppc/pmac.c: add MODULE_LICENSE ide/ppc/mpc8xx.c: add MODULE_LICENSE ide/pci/cmd640.c: add MODULE_LICENSE ide-pnp.c: add MODULE_LICENSE
-
Bartlomiej Zolnierkiewicz authored
Use ->ata_input_data method instead of calling ata_input_data() directly. Currently it matters only for (broken) ide-cris host driver but it may change in the future. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
This host driver doesn't support 32-bit I/O (it sets hwif->INSL/OUTSL to NULL) so IDE_HFLAG_NO_IO_32BIT host flag needs to be set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-