- 30 Dec, 2008 10 commits
-
-
Anton Vorontsov authored
Some 83xx boards were not ready for the optional QUICC Engine support. This patch fixes following build errors: arch/powerpc/platforms/built-in.o: In function `flush_disable_caches': (.text+0xb308): undefined reference to `par_io_data_set' arch/powerpc/platforms/built-in.o: In function `flush_disable_caches': (.text+0xb334): undefined reference to `par_io_data_set' arch/powerpc/platforms/built-in.o: In function `flush_disable_caches': (.text+0xb408): undefined reference to `qe_ic_get_high_irq' arch/powerpc/platforms/built-in.o: In function `flush_disable_caches': (.text+0xb478): undefined reference to `qe_ic_get_low_irq' arch/powerpc/platforms/built-in.o: In function `mpc832x_spi_init': mpc832x_rdb.c:(.init.text+0x574c): undefined reference to `par_io_config_pin' mpc832x_rdb.c:(.init.text+0x5768): undefined reference to `par_io_config_pin' mpc832x_rdb.c:(.init.text+0x5784): undefined reference to `par_io_config_pin' mpc832x_rdb.c:(.init.text+0x57a0): undefined reference to `par_io_config_pin' mpc832x_rdb.c:(.init.text+0x57bc): undefined reference to `par_io_config_pin' arch/powerpc/platforms/built-in.o:mpc832x_rdb.c:(.init.text+0x57d8): more undefined references to `par_io_config_pin' follow arch/powerpc/platforms/built-in.o: In function `mpc836x_rdk_init_IRQ': mpc836x_rdk.c:(.init.text+0x5e84): undefined reference to `qe_ic_init' arch/powerpc/platforms/built-in.o: In function `mpc836x_rdk_setup_arch': mpc836x_rdk.c:(.init.text+0x5f10): undefined reference to `qe_reset' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Anton Vorontsov authored
This patch fixes following sparse warnings: CHECK fsl_pci.c fsl_pci.c:32:13: warning: symbol 'setup_pci_atmu' was not declared. Should it be static? fsl_pci.c:89:13: warning: symbol 'setup_pci_cmd' was not declared. Should it be static? fsl_pci.c:133:12: warning: symbol 'fsl_pcie_check_link' was not declared. Should it be static? Signed-off-by:
-
Anton Vorontsov authored
Simply add the usb node to support USB host on the MPC8360E-RDK boards. Currently U-Boot doesn't fill the clock-frequency property for timer nodes, so for now we have to fill it manually. Signed-off-by:
-
Anton Vorontsov authored
- Update the device tree per QE USB bindings; - Add timer (FSL GTM) node; - Add gpio-controller node for BCSR13 bank (GPIOs on that bank are used to control the USB transceiver); - Set up other BCSR registers; - Configure the QE Par IO. The work is loosely based on Li Yang's patch[1], which was used to support peripheral mode only. [1] http://ozlabs.org/pipermail/linuxppc-dev/2008-August/061357.html The s-o-b line of the original patch preserved here. Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Anton Vorontsov authored
The driver supports very simple GPIO controllers, that is, when a controller provides just a 'data' register. Such controllers may be found in various BCSRs (Board's FPGAs used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc). So far we support only 1-byte GPIO banks. Support for other widths may be implemented when/if needed. p.s. To avoid "made up" compatible entries (like compatible = "simple-gpio"), boards must call simple_gpiochip_init() to pass the compatible string. Signed-off-by:
-
Anton Vorontsov authored
The patch adds bindings for BCSR GPIO banks, the bindings are used to describe particular BCSR registers that act as simple GPIO controllers. These GPIO banks might control power switches, SPI chip-selects, LEDs, etc. While at it, also fix "length" spelling error in the PIXIS FPGA bindings. Signed-off-by:
-
Anton Vorontsov authored
With this API we're able to set a QE pin to the GPIO mode or a dedicated peripheral function. The API relies on the fact that QE gpio controllers are registered. If they aren't, the API won't work (gracefully though). There is one caveat though: if anybody occupied the node->data before us, or overwrote it, then bad things will happen. Luckily this is all in the platform code that we fully control, so this should never happen. I could implement more checks (for example we could create a list of successfully registered QE controllers, and compare the node->data in the qe_pin_request()), but this is unneeded if nobody is going to do silly things behind our back. Signed-off-by:
-
Anton Vorontsov authored
This patch fixes following sparse warnings: CHECK mpc836x_mds.c mpc836x_mds.c:75:12: warning: Using plain integer as NULL pointer mpc836x_mds.c:79:13: warning: incorrect type in assignment (different address spaces) mpc836x_mds.c:79:13: expected unsigned char [usertype] *static [toplevel] bcsr_regs mpc836x_mds.c:79:13: got void [noderef] <asn:2>* mpc836x_mds.c:105:3: warning: incorrect type in argument 1 (different address spaces) mpc836x_mds.c:105:3: expected unsigned char volatile [noderef] [usertype] <asn:2>*addr mpc836x_mds.c:105:3: got unsigned char [usertype] * mpc836x_mds.c:105:3: warning: incorrect type in argument 1 (different address spaces) mpc836x_mds.c:105:3: expected unsigned char const volatile [noderef] [usertype] <asn:2>*addr mpc836x_mds.c:105:3: got unsigned char [usertype] * mpc836x_mds.c:107:3: warning: incorrect type in argument 1 (different address spaces) mpc836x_mds.c:107:3: expected unsigned char volatile [noderef] [usertype] <asn:2>*addr mpc836x_mds.c:107:3: got unsigned char [usertype] * mpc836x_mds.c:107:3: warning: incorrect type in argument 1 (different address spaces) mpc836x_mds.c:107:3: expected unsigned char const volatile [noderef] [usertype] <asn:2>*addr mpc836x_mds.c:107:3: got unsigned char [usertype] * mpc836x_mds.c:131:11: warning: incorrect type in argument 1 (different address spaces) mpc836x_mds.c:131:11: expected void volatile [noderef] <asn:2>*addr mpc836x_mds.c:131:11: got unsigned char [usertype] *static [toplevel] bcsr_regs Signed-off-by:
-
Anton Vorontsov authored
This patch fixes following sparse warnings: CHECK 83xx/usb.c 83xx/usb.c:205:5: warning: symbol 'mpc837x_usb_cfg' was not declared. Should it be static? CHECK 83xx/mpc831x_rdb.c 83xx/mpc831x_rdb.c:45:13: warning: symbol 'mpc831x_rdb_init_IRQ' was not declared. Should it be static? CHECK 83xx/mpc832x_rdb.c 83xx/mpc832x_rdb.c:133:13: warning: symbol 'mpc832x_rdb_init_IRQ' was not declared. Should it be static? CHECK 83xx/mpc832x_mds.c 83xx/mpc832x_mds.c:68:12: warning: Using plain integer as NULL pointer 83xx/mpc832x_mds.c:72:13: warning: incorrect type in assignment (different address spaces) 83xx/mpc832x_mds.c:72:13: expected unsigned char [usertype] *static [toplevel] bcsr_regs 83xx/mpc832x_mds.c:72:13: got void [noderef] <asn:2>* 83xx/mpc832x_mds.c:99:11: warning: incorrect type in argument 1 (different address spaces) 83xx/mpc832x_mds.c:99:11: expected void volatile [noderef] <asn:2>*addr 83xx/mpc832x_mds.c:99:11: got unsigned char [usertype] *static [toplevel] bcsr_regs Signed-off-by:
-
Anton Vorontsov authored
This is needed to not bother with ugly #ifdefs in the drivers. Signed-off-by:
-
- 28 Dec, 2008 2 commits
-
-
Ilya Yanok authored
This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by:
Yuri Tikhonov <yur@emcraft.com> Signed-off-by:
Vladimir Panfilov <pvr@emcraft.com> Signed-off-by:
Ilya Yanok <yanok@emcraft.com> Acked-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Hollis Blanchard authored
Ensure that total memory size is page-aligned, because otherwise mark_bootmem() gets upset. This error case was triggered by using 64 KiB pages in the kernel while arch/powerpc/boot/4xx.c arbitrarily reduced the amount of memory by 4096 (to work around a chip bug that affects the last 256 bytes of physical memory). Signed-off-by:
Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by:
-
- 23 Dec, 2008 11 commits
-
-
Dale Farnsworth authored
Wire up the trampoline code for ppc32 to relay exceptions from the vectors at address 0 to vectors at address 32MB, and modify Kconfig to enable Kdump support for all classic powerpcs. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
-
Dale Farnsworth authored
Add the ability for a classic ppc kernel to be loaded at an address of 32MB. This done by fixing a few places that assume we are loaded at address 0, and by changing several uses of KERNELBASE to use PAGE_OFFSET, instead. Signed-off-by:
-
Anton Vorontsov authored
While for debugging it is good to catch bogus users of ioremap, though for kdump support it is more convenient to use __ioremap for copy_oldmem_page() (exactly as we do for PPC64 currently). Note that copy_oldmem_page() calls __ioremap with flags set to '0', so it should be safe with the regard to the caches. The other option is to use kmap_atomic_pfn()[1], but it will not work for kernels compiled without HIGHMEM. That is, on a board with 256MB RAM and crashkernel=64M@32M case, the !HIGHMEM capturing kernel maps 0-96M range, which does not include all the memory needed to capture the dump. And, obviously, accessing anything upper than 96M will cause faults. [1] http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046747.htmlSigned-off-by:
-
Dale Farnsworth authored
Refactor the setting of kdump OF properties, moving the common code from machine_kexec_64.c to machine_kexec.c where it can be used on both ppc64 and ppc32. This will be needed for kdump to work on ppc32 platforms. Signed-off-by:
-
Anton Vorontsov authored
This replaces the dummy crash_setup_regs function with full-fledged crash_setup_regs implementation. On PPC32 we simply use the new ppc_save_regs function to dump the registers. Signed-off-by:
-
Anton Vorontsov authored
Today the arch/powerpc/xmon/setjmp.S file contains only the xmon_save_regs function. We want to use it for kdump purposes, so let's move the file into arch/powerpc/kernel/ and give the function a more generic name (ppc_save_regs). Signed-off-by:
-
Anton Vorontsov authored
Default ops are implicit now. Signed-off-by:
-
Anton Vorontsov authored
This removes the need for each platform to specify default kexec and crash kernel ops, thus effectively adds a working kexec support for most 6xx/7xx/7xxx-based boards. Platforms that can't cope with default ops will explode in some weird way (a hang or reboot is most likely), which means that the board's kexec support should be fixed or blacklisted via dummy _prepare callback returning -ENOSYS. Signed-off-by:
-
Dale Farnsworth authored
Refactor the setting of kexec OF properties, moving the common code from machine_kexec_64.c to machine_kexec.c where it can be used on both ppc64 and ppc32. This is needed for kexec to work on ppc32 platforms. Signed-off-by:
-
Sebastien Dugue authored
Currently, pseries_cpu_die() calls msleep() while polling RTAS for the status of the dying cpu. However, if the cpu that is going down also happens to be the one doing the tick then we're hosed as the tick_do_timer_cpu 'baton' is only passed later on in tick_shutdown() when _cpu_down() does the CPU_DEAD notification. Therefore jiffies won't be updated anymore. This replaces that msleep() with a cpu_relax() to make sure we're not going to schedule at that point. With this patch my test box survives a 100k iterations hotplug stress test on _all_ cpus, whereas without it, it quickly dies after ~50 iterations. Signed-off-by:
Sebastien Dugue <sebastien.dugue@bull.net> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
Commit 2a4aca11 ("powerpc/mm: Split low level tlb invalidate for nohash processors") changed a call to _tlbia to _tlbil_all but didn't include the header that defines _tlbil_all, leading to a build failure on 440 if KVM is enabled. This fixes it. Signed-off-by:
-
- 22 Dec, 2008 2 commits
-
-
Benjamin Krill authored
Since the QPACE (Chromodynamics Parallel Computing on the Cell Broadband Engine) platform doesn't use a iommu, doesn't have PCI devices and a MPIC much lesser setup and configurations are needed. So far all devices are detected as OF device. A notifier function is used to set the dma_ops for the of_platform bus. Further this patch splits the PPC_CELL_NATIVE into PPC_CELL_COMMON which are parts that are shared with the QPACE platform and the rest. Signed-off-by:
Benjamin Krill <ben@codiert.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
CBE_THERM and OPROFILE_CELL both cannot be built without SPU_FS disabled, so make the dependency explicit. Reported-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
-
- 21 Dec, 2008 15 commits
-
-
Wolfram Sang authored
- error cases for mapbase and irq were unbundled - mapped irq now gets disposed on error Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
Wolfram Sang authored
Add RTS/CTS-support for the PSC of the MPC5200B. Tested with a Phytec MPC5200B-IO. Signed-off-by:
-
René Bürgel authored
This patch adds the capability to the mpc52xx-uart to report framing errors, parity errors, breaks and overruns to userspace. These values may be requested in userspace by using the ioctl TIOCGICOUNT. Signed-off-by:
René Bürgel <r.buergel@unicontrol.de> Signed-off-by:
-
Wolfram Sang authored
As this driver polls for a complete MDIO transaction, there is no need to enable interrupts for it. Furthermore, make both checks for freeing MDIO-bus irqs consistent. Signed-off-by:
-
Tim Yamin authored
This patch adds MDMA/UDMA support using BestComm for DMA on the MPC5200 platform. Based heavily on previous work by Freescale (Bernard Kuhn, John Rigby) and Domen Puncer. With this patch, a SanDisk Extreme IV CF card gets read speeds of approximately 26.70 MB/sec. Signed-off-by:
Tim Yamin <plasm@roo.me.uk> Signed-off-by:
-
Grant Likely authored
When ATA DMA is enabled, bestcomm prefetching does not work. This patch adds a function to disable bestcomm prefetch when the ATA Bestcomm task is initialized. Signed-off-by: -
Tim Yamin authored
1) ata.h has dst_pa in the wrong place (needs to match what the BestComm task microcode in bcom_ata_task.c expects); fix it. 2) The BestComm ATA task priority was changed to maximum in bestcomm_priv.h; this fixes a deadlock issue experienced with heavy DMA occurring on both the ATA and Ethernet BestComm tasks, e.g. when downloading a large file over a LAN to disk. Signed-off-by:
-
Grant Likely authored
The buffer descriptors for the ATA BestComm task are larger than the current definition for bcom_bd. This causes problems because the various bcom_... functions dereference the buffer descriptor pointer by using the array operator which doesn't work when the buffer descriptors are a different size. This patch adds the bcom_get_bd() function which uses the value in bcom_task.bd_size to calculate the offset into the BD table. This patch also changes the definition of bcom_bd to specify a data size of 0 instead of 1 so that it will never work if anyone attempts to dereference the bd list as an array (as opposed to something that might work even though it is wrong). Finally, this patch moves the definition of bcom_bd up in the file to eliminate a forward declaration. Based on patch originally written by Tim Yamin. Signed-off-by:
-
Grant Likely authored
The MPC5200 internal interrupt controller setup function needs to set the default interrupt controller when it is called. Without this irq_create_of_mapping() cannot be called without first determining the pointer to the irq controller (ie. call with controller = NULL). Reported-by:
Steven Cavanagh <scavanagh@secretlab.ca> Signed-off-by:
-
Grant Likely authored
This patch adds documentation to the mpc5200 interrupt controller driver and cleans up some minor coding conventions. It also moves the contents of mpc52xx_pic.h into the driver proper (except for a small common bit that is moved to the common mpc52xx.h) because the information encoded there is not required by any other part of kernel code. Finally for code readability sake, the L2_OFFSET shift value is removed because the code using it resolves to a noop. Signed-off-by: -
Benjamin Herrenschmidt authored
Rework to MMU code dropped a much missed 'blr' instruction. Brown-Paper-Bag-Worn-By:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Scott Wood authored
The correct #address-cells was still used for the actual translation, so the impact is only a possibility of choosing the wrong range entry or failing to find any match. Most common cases were not affected. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Grant Erickson authored
Add const qualifier to device_node argument for dcr_resource_{start,len} as of_get_property also const-qualifies this argument. Signed-off-by:Grant Erickson <gerickson@nuovations.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
After discussing with chip designers, it appears that it's not necessary to set G everywhere on 440 cores. The various core errata related to prefetch should be sorted out by firmware by disabling icache prefetching in CCR0. We add the workaround to the kernel however just in case oooold firmwares don't do it. This is valid for -all- 4xx core variants. Later ones hard wire the absence of prefetch but it doesn't harm to clear the bits in CCR0 (they should already be cleared anyway). We still leave G=1 on the linear mapping for now, we need to stop over-mapping RAM to be able to remove it. Signed-off-by:
-
Benjamin Herrenschmidt authored
Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in in the hash code based on some CPU feature bit. We also manipulate _PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places. This changes the logic so that instead, the PTE now contains _PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms that need it. The hash code clears it if the feature bit is not set. It also adds some clean accessors to setup various valid combinations of access flags and change various bits of code to use them instead. This should help having the PTE actually containing the bit combinations that we really want. I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead set it explicitely from the TLB miss. I will ultimately remove it completely as it appears that it might not be needed after all but in the meantime, having it in the TLB miss makes things a lot easier. Signed-off-by:
-
