- 08 Feb, 2010 40 commits
-
-
Andres Salomon authored
rate_control_alloc is not used by anything outside of ieee80211_init_rate_ctrl_alg. Both are in rate.c; there's no reason to make rate_control_alloc visible outside of it. Signed-off-by:
Andres Salomon <dilinger@collabora.co.uk> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
This patch fixes a WARN_ON which is triggered by Poland's country code. ath: EEPROM regdomain: 0x8268 ath: EEPROM indicates we should expect a country code ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x37 ath: Country alpha2 being used: PL ath: Regpair used: 0x37 -----------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/regd.c:155 ath_regd_init+0x30b Pid: 12661, comm: firmware/carl91 2.6.33-rc5-wl #18 Call Trace: [<>] ? warn_slowpath_common+0x76/0x8c [<>] ? ar9170_reg_notifier+0x0/0x2d [carl9170usb] [<>] ? ath_regd_init+0x30b/0x377 [ath] [<>] ? ar9170_register+0x3b3/0x3ca [carl9170usb] [...] ---[ end trace ]--- Note: Poland is just an example. But it is very likely that more country codes are affected. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() driver operation is not currently used anywhere in mac80211 and there are no plans to use it in the not-so-near future. So it can go without anyone missing it. Signed-off-by:
Kalle Valo <kalle.valo@iki.fi> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Compile-tested only. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. p54 uses struct ieee80211_tx_queue_stats also internally, so create a new identical struct p54_tx_queue_stats which the driver can use. Compile-tested only. Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Stefano Brivio <stefano.brivio@polimi.it> Cc: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Because ar9170 uses ieee80211_tx_queue_stats internally, create a new identical struct ar9170_tx_queue_stats which the driver can use. Compile-tested only. Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. mwl8k used struct ieee80211_tx_queue_stats internally to track the queue lenght. Replace struct ieee80211_tx_queue_stats with a simple len field in struct mwl8k_tx_queue. Limit and count fields seemed to be unused. Compile-tested only. Cc: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
-
Kalle Valo authored
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by:
-
Ming Lei authored
If split tkip key is used, ath_delete_key should delete rx key and rx mic key. This patch fixes the leak of hw keycache in the case. Signed-off-by: -
Johannes Berg authored
When userspace requests a deauth while the authentication work is pending in the auth (not probe) state, we do not properly abort the work and then things get confused. Fix that and also improve the checks here to include the correct virtual interface, just in case two virtual interfaces would ever try to connect to the same BSS. Also fix a bug -- need to use list_del_rcu instead of just list_del to free a work item. Signed-off-by:
-
Samuel Ortiz authored
When running directed active scans we currently end up sending both the SSID probe requests and an additional broadcast one. This is due to the fact that we always leave the probe request template SSID IE length to 0. Instead we should set it to the first SSID to scan, and fill the direct_scan array with the remaining SSIDs to scan for. This way we only send what we've been asked to: a broadcast probe request when no directed scan is requested, and directed probe requests otherwise. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Ben Cahill authored
Existing iwl6050_ops->iwl6050_hcmd_utils structure had no pointers to chain noise functions (gain_computation and chain_noise_reset). As it turns out, by adding chain_noise_scale (see related patch), there is no need for separate chain noise function, so simply use iwl6000_ops->iwl5000_hcmd_utils, and remove those for 6050. Signed-off-by:
Ben Cahill <ben.m.cahill@intel.com> Signed-off-by:
-
Ben Cahill authored
6x50 device requires a different scaling factor for Rx gain values sent to device via PHY_CALIBRATION_CMD (CHAIN_NOISE_GAIN_CMD). Rather than create a new iwlXXXX_gain_computation() function, add new chain_noise_scale member to struct iwl_cfg, and keep using iwl5000_gain_computation(). Signed-off-by:
-
Johannes Berg authored
In AP mode, the only mode where the parameter is supposed to be valid, we never assign it! Fix that to allow drivers to avoid parsing the TIM IE for the value. Signed-off-by:
-
Benoit Papillault authored
This file helps debugging HT channels since it displays if we are on ht20 or ht40+/ht40- Signed-off-by:
Benoit Papillault <benoit.papillault@free.fr> Signed-off-by:
-
Holger Schurig authored
Retrying commands seldomly works, most often the firmware is in a weird state anyway and needs the device to reset. So it's better to report the broken state back to user-space. Also rename command_timer_fn() into lbs_cmd_timeout_handler(), which better reflect it's usage. Signed-off-by:
Holger Schurig <holgerschurig@gmail.com> Signed-off-by:
-
Kalle Valo authored
mac80211 uses unit units of 32 usec with txop but wl1251_acx_ac_cfg() expects it to be usecs. This fortunately didn't cause any severe problems, only that firmware was using incorrect WMM settings. Signed-off-by:
Kalle Valo <kalle.valo@nokia.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Randy Dunlap authored
libertas/if_spi.c needs to #include linux/semaphore.h to fix build errors: drivers/net/wireless/libertas/if_spi.c:59: error: field 'spi_ready' has incomplete type drivers/net/wireless/libertas/if_spi.c:60: error: field 'spi_thread_terminated' has incomplete type drivers/net/wireless/libertas/if_spi.c:785: error: implicit declaration of function 'down_interruptible' drivers/net/wireless/libertas/if_spi.c:787: error: implicit declaration of function 'up' drivers/net/wireless/libertas/if_spi.c:834: error: implicit declaration of function 'down' drivers/net/wireless/libertas/if_spi.c:943: error: implicit declaration of function 'sema_init' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Jochen Friedrich authored
Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. Also remove a bogus comment. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
-
Larry Finger authored
If b43 or b43legacy are deauthenticated or disconnected, there is a possibility that a reconnection is tried with the queues stopped in mac80211. To prevent this, start the queues before setting STAT_INITIALIZED. In b43, a similar change has been in place (twice) in the wireless_core_init() routine. Remove the duplicate and add similar code to b43legacy. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.32] Signed-off-by:
-
Wey-Yi Guy authored
When there is a need to restart/reconfig hw, tear down all the aggregation queues and let the mac80211 and driver get in-sync to have the opportunity to re-establish the aggregation queues again. Need to wait until driver re-establish all the station information before tear down the aggregation queues, driver(at least iwlwifi driver) will reject the stop aggregation queue request if station is not ready. But also need to make sure the aggregation queues are tear down before waking up the queues, so mac80211 will not sending frames with aggregation bit set. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Senthil Balasubramanian authored
The TIM timer interrupt is enabled even before the ACK of nullqos is received which is unnecessary. Also clean up the CONF_PS part of config callback properly for better readability. Signed-off-by:
Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
-
Senthil Balasubramanian authored
beacons configuration SHOULD be done only if the STA is associated. Signed-off-by:
-
Johannes Berg authored
Many drivers would like to sleep during station addition and removal, and currently have a high complexity there from not being able to. This introduces two new callbacks sta_add() and sta_remove() that drivers can implement instead of using sta_notify() and that can sleep, and the new sta_add() callback is also allowed to fail. The reason we didn't do this previously is that the IBSS code wants to insert stations from the RX path, which is a tasklet, so cannot sleep. This patch will keep the station allocation in that path, but moves adding the station to the driver out of line. Since the addition can now fail, we can have IBSS peer structs the driver rejected -- in that case we still talk to the station but never tell the driver about it in the control.sta pointer. If there will ever be a driver that has a low limit on the number of stations and that cannot talk to any stations that are not known to it, we need to do come up with a new strategy of handling larger IBSSs, maybe quicker expiry or rejecting peers. Signed-off-by:
-
Johannes Berg authored
We can now easily determine whether we already have probe response information for the BSS we are asked to connect to, in which case there's little point in probing the BSS again. Signed-off-by:
-
Johannes Berg authored
Upstream radiotap has adopted the namespace proposal David Young made and I then took care of, for which I had adapted the radiotap parser as a library outside the kernel. This brings the in-kernel parser up to speed. Signed-off-by:
-
Johannes Berg authored
For debugging hardware scan trigger/complete functionality, it was useful to have code in hwsim that pretends to do a hardware scan. This code could be extended to actually do the scan, but for now it was sufficient for me to only pretend. Since hwsim was written to ease debugging, it only makes sense to add it to it permanently. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville authored
Conflicts: net/mac80211/scan.c
-
Johannes Berg authored
Reinette found the reason for the warnings that happened occasionally when a hw-offloaded scan finished; her description of the problem: mac80211 will defer the handling of scan requests if it is busy with management work at the time. The scan requests are deferred and run after the work has completed. When this occurs there are currently two problems. * The scan request for hardware scan is not fully populated with the band and channels to scan not initialized. * When the scan is queued the state is not correctly updated to reflect that a scan is in progress. The problem here is that when the driver completes the scan and calls ieee80211_scan_completed() a warning will be triggered since mac80211 was not aware that a scan was in progress. The reason is that the queued scan work will start the hw scan right away when the hw_scan_req struct has already been allocated. However, in the first pass it will not have been filled, which happens at the same time as setting the bits. To fix this, simply move the allocation after the pending work test as well, so that the first iteration of the scan work will call __ieee80211_start_scan() even in the hardware scan case. Bug-identified-by: -
Wey-Yi Guy authored
iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146Signed-off-by:
-
