Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch converts aic79xx to use the midlayer-supplied tcq
functions.

We also set the queuedepth to '1' if tcq is disabled; the
aic79xx driver gets confused otherwise. Will set it back to
'2' once I figure out how to queue requests in the driver.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch removes the need for platform_data->qfrozen.
We're now using complete() instead of semaphores thus
simplifying ahd_freeze_simq() quite a lot.
This also fixes some deadlocks in the recovery code (again).
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Change version number to 8.1.4
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Two misc fixes:
 - Fix deadlock caused by return with host_lock held in lpfc_findnode_did
 - Initialize all fields of the allocated mail box structure to zero.
   Was causing some sysfs mailbox commands to fail immediately after load.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Introduce lpfc_reset_barrier() function for resets on dual channel adapters

Workaround for a hardware errata on dual channel asics. There is a
potential for the chip to lock up on a reset if a shared dma engine is in
use. The (ugly) work around requires a reset process which uses a mailbox
command to synchronize the independent channels prior to the reset to
avoid the issue. Unfortunately, the timing windows required to ensure this
workaround succeeds are very specific, meaning we can't release the cpu
during the barrier.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fixed a timer panic due to timer firing after freeing ndlp
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fixed RSCN handling when a PLOGI is in retry.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix Discovery processing for NPorts that change their NPortId on the fly
due to a cable swap.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

i2o_exec_lct_modified() does not release memory allocated for work_struct.
Signed-off-by: Vasily Averin <vvs@sw.ru>

Although your patch is the same, i've rewritten it a little bit for
naming consistency in the I2O driver.
Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The patch

[SCSI] SCSI core kmalloc2kzalloc

Has an incorrect piece in sr_ioctl.c; it changes buffer from kmalloc
to kzalloc, but then removes the clearing of the stack variable struct
packet_command.  This, in turn leaves rubbish in the sense pointer
which the sr_do_ioctl() command then happily writes to ... oops.

Thanks to Mike Christie <michaelc@cs.wisc.edu> for spotting this.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On 02/07/2006 04:12:55 AM, Christoph Hellwig wrote:
> On Mon, Feb 06, 2006 at 08:02:21PM -0500, Willem Riede wrote:
>
> > But I will certainly help retire scsi_request. And anything else that is
> > needed to keep up with proper kernel style. Let me know what those are, if
> > you  would? I'll start looking at how st has changed, and will be back with
> > any  questions I may have.
>
> right now the above is the most urgent bit.  What would be nice but not
> required is a conversion to the sense handling helpers, similar to what
> st got (aka using the *normalize_sense functions and then dealing with the
> parsed sense buffer instead of the raw sense data)

Ok, so here is my first take at satisfying this request.
Be warned, that beyond compiling, and checking that the new module
doesn't immediately blow up, there hasn't yet been a lot of testing.

But this should allow you to comment on the changes, and move forward
with dropping scsi_request from the kernel code.
Signed-off-by: Willem Riede <osst@riede.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Stop gcc complaining about undefined variables
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Change version number to 8.1.3
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix polling mode panic

Cause: Race between interrupt driven and polling path in harvesting iocbs
from
the response ring.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Protect NPL lists with host lock

Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called
outside of the discovery thread context. We have to iterate
through the NPL lists under the host lock and all add/del
operations on those lists have to be done under host lock.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix deadlock in lpfc_fdmi_tmo_handler

lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock
held.  lpfc_fdmi_cmd assumes the host_lock is released as it calls functions
that acquire the host_lock.  lpfc_fdmi_tmo_handler acquired the host_lock to
protect access to work_hba_events.  This was already checked in the worker
thread so we can remove that code completely and remove access to the
host_lock.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix performance when using multiple SLI rings

Currently the driver allocates all of its SLI command and response ring
entries to one primary ring. Other rings get little, or no, resources.

Allow more resources to be given to ring 1
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Remove unused MBhostaddr from lpfc_sli structure
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

PCI hrd_type should be obtained with pci_read_config_byte() macro

Driver keys off of this field to report the proper adapter type.
The pci subsystem explicitly clears the multiport bit in the copy of
the field given the driver. Thus, to properly name the card, obtain it
from config space.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Derive supported speeds from LMT field in the READ_CONFIG

Driver was keying off internal cores. Use what the firmware reports instead.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Begin introducing the concept of sas remote devices that have an rphy
embedded.  The first one (this) is a simple end device.  All that an
end device really does is have port mode page parameters contained.
The next and more complex piece will be expander remote devices.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

aic94xx doesn't have a use for the bay or enclosure identifiers.
Also, I think it's not going to need a get_linkerrors(), so wire up
all of these exported properties as conditional on the underlying
function support.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Use the kthread_ API instead of opencoding lots of hairy code for kernel
thread creation and teardown.

Also switch from semaphore-based thread wakeup to wake_up_process.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

I don't think these exist in silicon yet, but the aic94xx driver has a
register setting for them.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This is the first half of a patch to add the generic domain validation
to mptspi.  It also creates a secondary "virtual" channel for raid
component devices since these are now exported with no_uld_attach.

What Eric and I would have really liked is to export all physical
components on channel 0 and all raid components on channel 1.
Unfortunately, this would result in device renumbering on platforms with
mixed RAID/Physical devices which was considered unacceptable for
userland stability reasons.

Still to be done is to plug back the extra parameter setting and DV
pieces on reset and hotplug.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Change version number to 8.1.2
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix panic caused by HBA resets and target side cable pulls
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fixed module parameter descriptions.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Code cleanup of lpfc_mbx_cmpl_config_link
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Allow turning on internal loop-back mode
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Code style changes for Discovery code
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Added support for FAN
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Add ERROR and WARM_START modes for diagnostic purposes.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Remove hba_list from struct lpfc_hba
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Correct use of the hostdata field in scsi_host
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>