Skip to content

L
linux-davinci
Switch branch/tag
  1. 13 Nov, 2009 1 commit
  3. 10 Oct, 2009 1 commit
  5. 12 Nov, 2009 1 commit
  7. 10 Nov, 2009 2 commits
    • Andrew Morton's avatar
      ERROR: space prohibited before that close parenthesis ')' · f78370af
      Andrew Morton authored 
      #252: FILE: fs/direct-io.c:1212:
+			if (end > isize )

total: 1 errors, 0 warnings, 338 lines checked

./patches/direct-io-cleanup-blockdev_direct_io-locking.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      f78370af
    • Christoph Hellwig's avatar
      Currently the locking in blockdev_direct_IO is a mess, we have three · b3c9569b
      Christoph Hellwig authored 
      different locking types and very confusing checks for some of them.  The
most complicated one is DIO_OWN_LOCKING for reads, which happens to not
actually be used.

This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read
case is unused anyway, and the write side is almost identical to
DIO_NO_LOCKING.  The difference is that DIO_NO_LOCKING always sets the
create argument for the get_blocks callback to zero, but we can easily
move that to the actual get_blocks callbacks.  There are four users of the
DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is
fine with the new version, ocfs2 only errors out if create were ever set,
and we can remove this dead code now, the block device code only ever uses
create for an error message if we are fully beyond the device which can
never happen, and last but not least XFS will need the new behavour for
writes.

Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag.  Separate out the check for not allowing to fill holes into a
separate flag, although for now both flags always get set at the same
time.

Also revamp the documentation of the locking scheme to actually make
sense.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      b3c9569b
  9. 30 Oct, 2009 2 commits
    • Andrew Morton's avatar
      Cc: Jeff Moyer <jmoyer@redhat.com> · f0a477b3
      Andrew Morton authored 
      Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      f0a477b3
    • Jeff Moyer's avatar
      Intel reported a performance regression caused by the following commit: · b7f890ec
      Jeff Moyer authored 
      commit 848c4dd5
Author: Zach Brown <zach.brown@oracle.com>
Date:   Mon Aug 20 17:12:01 2007 -0700

    dio: zero struct dio with kzalloc instead of manually

    This patch uses kzalloc to zero all of struct dio rather than
    manually trying to track which fields we rely on being zero.  It
    passed aio+dio stress testing and some bug regression testing on
    ext3.

    This patch was introduced by Linus in the conversation that lead up
    to Badari's minimal fix to manually zero .map_bh.b_state in commit:

      6a648fa7

    It makes the code a bit smaller.  Maybe a couple fewer cachelines to
    load, if we're lucky:

       text    data     bss     dec     hex filename
    3285925  568506 1304616 5159047  4eb887 vmlinux
    3285797  568506 1304616 5158919  4eb807 vmlinux.patched

    I was unable to measure a stable difference in the number of cpu
    cycles spent in blockdev_direct_IO() when pushing aio+dio 256K reads
    at ~340MB/s.

    So the resulting intent of the patch isn't a performance gain but to
    avoid exposing ourselves to the risk of finding another field like
    .map_bh.b_state where we rely on zeroing but don't enforce it in the
    code.

Zach surmised that zeroing out the page array was what caused most of
the problem, and suggested the approach taken in the attached patch for
resolving the issue.  Intel re-tested with this patch and saw a 0.6%
performance gain (the original regression was 0.5%).
Signed-off-by: default avatarJeff Moyer <jmoyer@redhat.com>
Acked-by: default avatarZach Brown <zach.brown@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      b7f890ec
  11. 13 Nov, 2009 2 commits
  13. 14 Oct, 2009 1 commit
  15. 11 Nov, 2009 1 commit
  17. 30 Sep, 2009 3 commits
  19. 13 Nov, 2009 2 commits
    • Karel Zak's avatar
      The size of EFI GPT header is not static, but whole sector is · dbd508a2
      Karel Zak authored 
      allocated for the header. The HeaderSize field must be greater
than 92 (= sizeof(struct gpt_header) and must be less than or
equal to the logical block size.

It means we have to read whole sector with the header, because the
header crc32 checksum is calculated according to HeaderSize.

For more details see UEFI standard (version 2.3, May 2009):
  - 5.3.1 GUID Format overview, page 93
  - Table 13. GUID Partition Table Header, page 96
Signed-off-by: default avatarKarel Zak <kzak@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      dbd508a2
    • Karel Zak's avatar
      Currently, kernel uses strictly 512-byte sectors for EFI GPT parsing. · 58213974
      Karel Zak authored 
      That's wrong.

UEFI standard (version 2.3, May 2009, 5.3.1 GUID Format overview, page
95) defines that LBA is always based on the logical block size. It
means bdev_logical_block_size() (aka BLKSSZGET) for Linux.

This patch removes static sector size from EFI GPT parser.

The problem is reproducible with the latest GNU Parted:

 # modprobe scsi_debug dev_size_mb=50 sector_size=4096

  # ./parted /dev/sdb print
  Model: Linux scsi_debug (scsi)
  Disk /dev/sdb: 52.4MB
  Sector size (logical/physical): 4096B/4096B
  Partition Table: gpt

  Number  Start   End     Size    File system  Name     Flags
   1      24.6kB  3002kB  2978kB               primary
   2      3002kB  6001kB  2998kB               primary
   3      6001kB  9003kB  3002kB               primary

  # blockdev --rereadpt /dev/sdb
  # dmesg | tail -1
   sdb: unknown partition table      <---- !!!

with this patch:

  # blockdev --rereadpt /dev/sdb
  # dmesg | tail -1
   sdb: sdb1 sdb2 sdb3
Signed-off-by: default avatarKarel Zak <kzak@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      58213974
  21. 12 Nov, 2009 1 commit
  23. 16 Oct, 2009 1 commit
  25. 09 Oct, 2009 1 commit
  27. 30 Sep, 2009 1 commit
  29. 24 Aug, 2009 1 commit
  31. 11 Nov, 2009 1 commit
  33. 29 Sep, 2009 1 commit
  35. 11 Nov, 2009 7 commits
  37. 13 Oct, 2009 1 commit
  39. 11 Nov, 2009 1 commit
    • Oleg Nesterov's avatar
      Thanks to Roland who pointed out de_thread() issues. · 17ea1f8b
      Oleg Nesterov authored 
      Currently we add sub-threads to ->real_parent->children list.  This buys
nothing but slows down do_wait().

With this patch ->children contains only main threads (group leaders). 
The only complication is that forget_original_parent() should iterate over
sub-threads by hand, and de_thread() needs another list_replace() when it
changes ->group_leader.

Henceforth do_wait_thread() can never see task_detached() && !EXIT_DEAD
tasks, we can remove this check (and we can unify do_wait_thread() and
ptrace_do_wait()).

This change can confuse the optimistic search in mm_update_next_owner(),
but this is fixable and minor.

Perhaps badness() and oom_kill_process() should be updated, but they
should be fixed in any case.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      17ea1f8b
  41. 30 Oct, 2009 1 commit
  43. 16 Oct, 2009 3 commits
  45. 11 Nov, 2009 1 commit
  47. 12 Nov, 2009 3 commits
    • Oleg Nesterov's avatar
      Suggested by Roland. · 5c97a8fc
      Oleg Nesterov authored 
      Unlike powepc, x86 always calls tracehook_report_syscall_exit(step) with
step = 0, and sends the trap by hand.

This results in unnecessary SIGTRAP when PTRACE_SINGLESTEP follows the
syscall-exit stop.

Change syscall_trace_leave() to pass the correct "step" argument to
tracehook and remove the send_sigtrap() logic.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      5c97a8fc
    • Oleg Nesterov's avatar
      Suggested by Roland. · 7a5524be
      Oleg Nesterov authored 
      Implement user_single_step_siginfo() for x86.  Extract this code from
send_sigtrap().

Since x86 calls tracehook_report_syscall_exit(step => 0) the new helper is
not used yet.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      7a5524be
    • Oleg Nesterov's avatar
      Suggested by Roland. · d5dda5fa
      Oleg Nesterov authored 
      Change tracehook_report_syscall_exit() to look at step flag and send the
trap signal if needed.

This change affects ia64, microblaze, parisc, powerpc, sh.  They pass
nonzero "step" argument to tracehook but since it was ignored the tracee
reports via ptrace_notify(), this is not right and not consistent.

	- PTRACE_SETSIGINFO doesn't work

	- if the tracer resumes the tracee with signr != 0 the new signal
	  is generated rather than delivering it

	- If PT_TRACESYSGOOD is set the tracee reports the wrong exit_code

I don't have a powerpc machine, but I think this test-case should see the
difference:

	#include <unistd.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <assert.h>
	#include <stdio.h>

	int main(void)
	{
		int pid, status;

		if (!(pid = fork())) {
			assert(ptrace(PTRACE_TRACEME) == 0);
			kill(getpid(), SIGSTOP);

			getppid();

			return 0;
		}

		assert(pid == wait(&status));
		assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACESYSGOOD) == 0);

		assert(ptrace(PTRACE_SYSCALL, pid, 0,0) == 0);
		assert(pid == wait(&status));

		assert(ptrace(PTRACE_SINGLESTEP, pid, 0,0) == 0);
		assert(pid == wait(&status));

		if (status == 0x57F)
			return 0;

		printf("kernel bug: status=%X shouldn't have 0x80\n", status);
		return 1;
	}
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      d5dda5fa