Create a blacklist for processors that should not load the acpi-cpufreq module.

The initial entry in the blacklist function is the Intel 0f68 processor.  It's
specification update mentions errata AL30 which implies that cpufreq should not
run on this processor.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Remove an obsolete check that used to prevent there being more
than 2 low P-states.  Now that low-to-low P-states changes are
enabled, it prevents otherwise workable configurations with
multiple low P-states.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Tested-by: Krists Krilovs <pow@pow.za.net>
Signed-off-by: Dave Jones <davej@redhat.com>

remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

commit	42a06f21

Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
teardown. To make a long story short, the rwlock write-lock causes a circular
dependency with cancel_delayed_work_sync(), because the timer handler takes the
read lock.

Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
callers (writers) hold the write rwsem at the earliest sysfs calling stage.

However, the rwlock write-lock is not needed upon governor stop.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: rjw@sisk.pl
CC: mingo@elte.hu
CC: Shaohua Li <shaohua.li@intel.com>
CC: Pekka Enberg <penberg@cs.helsinki.fi>
CC: Dave Young <hidave.darkstar@gmail.com>
CC: "Rafael J. Wysocki" <rjw@sisk.pl>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: trenn@suse.de
CC: sven.wegener@stealer.net
CC: cpufreq@vger.kernel.org
Signed-off-by: Dave Jones <davej@redhat.com>

Ondemand has only global variables for userspace tunings via sysfs.
But they were exposed per CPU which wrongly implies to the user that
his settings are applied per cpu. Also locking sysfs against concurrent
access won't be necessary anymore after deprecation time.

This means the ondemand config dir is moved:
/sys/devices/system/cpu/cpu*/cpufreq/ondemand ->
     /sys/devices/system/cpu/cpufreq/ondemand

The old files will still exist, but reading or writing to them will
result in one (printk_once) deprecation msg to syslog per file.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>

Currently everything in the cpufreq layer is per core based.
This does not reflect reality, for example ondemand on conservative
governors have global sysfs variables.

Introduce a global cpufreq directory and add the kobject to the governor
struct, so that governors can easily access it.
The directory is initialized in the cpufreq_core_init initcall and thus will
always be created if cpufreq is compiled in, even if no cpufreq driver is
active later.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>

Doing:
echo 0 >cpu1/online
echo 1 >cpu1/online

on a managed CPU will result in:
Jul 22 15:15:37 linux kernel: [   80.013864] WARNING: at fs/sysfs/dir.c:487 sysfs_add_one+0xcf/0xe6()
Jul 22 15:15:37 linux kernel: [   80.013866] Hardware name: To Be Filled By O.E.M.
Jul 22 15:15:37 linux kernel: [   80.013868] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu1/cpufreq'
Jul 22 15:15:37 linux kernel: [   80.013870] Modules linked in: powernow_k8
Jul 22 15:15:37 linux kernel: [   80.013874] Pid: 5750, comm: bash Not tainted 2.6.31-rc2 #40
Jul 22 15:15:37 linux kernel: [   80.013876] Call Trace:
Jul 22 15:15:37 linux kernel: [   80.013879]  [<ffffffff8112ebda>] ? sysfs_add_one+0xcf/0xe6
Jul 22 15:15:37 linux kernel: [   80.013884]  [<ffffffff81041926>] warn_slowpath_common+0x77/0xa4
Jul 22 15:15:37 linux kernel: [   80.013888]  [<ffffffff810419a0>] warn_slowpath_fmt+0x3c/0x3e
Jul 22 15:15:37 linux kernel: [   80.013891]  [<ffffffff8112ebda>] sysfs_add_one+0xcf/0xe6
Jul 22 15:15:37 linux kernel: [   80.013894]  [<ffffffff8112f213>] create_dir+0x58/0x87
Jul 22 15:15:37 linux kernel: [   80.013898]  [<ffffffff8112f27a>] sysfs_create_dir+0x38/0x4f
Jul 22 15:15:37 linux kernel: [   80.013902]  [<ffffffff811ffb8a>] kobject_add_internal+0x11f/0x1de
Jul 22 15:15:37 linux kernel: [   80.013905]  [<ffffffff811ffd21>] kobject_add_varg+0x41/0x4e
Jul 22 15:15:37 linux kernel: [   80.013908]  [<ffffffff811ffd7a>] kobject_init_and_add+0x4c/0x57
Jul 22 15:15:37 linux kernel: [   80.013913]  [<ffffffff810667bc>] ? mark_lock+0x22/0x228
Jul 22 15:15:37 linux kernel: [   80.013918]  [<ffffffff813e8a3b>] cpufreq_add_dev_interface+0x40/0x1e4
...

This bug slipped in by git commit:
150b06f7f223cfd0f808737a5243cceca8ea47fa

When splitting up cpufreq_add_dev, the whole cpufreq_add_dev function
is not left anymore, only cpufreq_add_dev_policy.
This patch should reconstruct the identical functionality again as it
was before the split.

CC: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Dave Jones <davej@redhat.com>

I think the way "cpuinfo_cur_info" and "scaling_cur_info" are defined under
./Documentation/cpu-freq/user-guide.txt can be enhanced. Currently, they are
both defined the same way: "Current speed/frequency" of the CPU, in KHz".

Below is a patch that distinguishes one from the other.

Regards,
- naga -

-----------------------------------------
Update description for "cpuinfo_cur_freq" and "scaling_cur_freq".

Some of the wording is drawn from comments found in
./drivers/cpufreq/cpufreq.c: cpufreq_out_of_sync():

 *      @old_freq: CPU frequency the kernel thinks the CPU runs at
 *      @new_freq: CPU frequency the CPU actually runs at
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Commit 4bc5d341 is broken and causes regressions:

(1) cpufreq_driver->resume() and ->suspend() were only called on
__powerpc__, but you could set them on all architectures. In fact,
->resume() was defined and used before the PPC-related commit
42d4dc3f complained about in 4bc5d341.

(2) Therfore, the resume functions in acpi_cpufreq and speedstep-smi
would never be called.

(3) This means speedstep-smi would be unusuable after suspend or resume.

The _real_ problem was calling cpufreq_driver->get() with interrupts
off, but it re-enabling interrupts on some platforms. Why is ->get()
necessary?

Some systems like to change the CPU frequency behind our
back, especially during BIOS-intensive operations like suspend or
resume. If such systems also use a CPU frequency-dependant timing loop,
delays might be off by large factors. Therefore, we need to ascertain
as soon as possible that the CPU frequency is indeed at the speed we
think it is. You can do this two ways: either setting it anew, or trying
to get it. The latter is what was done, the former also has the same IRQ
issue.

So, let's try something different: defer the checking to after interrupts
are re-enabled, by calling cpufreq_update_policy() (via schedule_work()).
Timings may be off until this later stage, so let's watch out for
resume regressions caused by the deferred handling of frequency changes
behind the kernel's back.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

In the recent change by Al Viro that changes verious subsystems
to use "struct path" one case was missed in the autofs4 module
which causes mounts to no longer expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889A
  ALSA: hda - Add missing mux check for VT1708

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style
  V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors.
  V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true
  V4L/DVB (12457): zr364: wrong indexes
  V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces
  V4L/DVB (12450): Siano: Fixed SDIO compilation bugs
  V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx
  V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices

My previous patch (commit 4f8ee2c9: "lmb: Remove __init from
lmb_end_of_DRAM()") removed __init in lmb.c but missed the fact that it
was also marked as such in the .h
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit log for commit 517d3cc1
("[libata] ata_piix: Enable parallel scan") says:

    This patch turns on parallel scanning for the ata_piix driver.
    This driver is used on most netbooks (no AHCI for cheap storage it seems).
    The scan is the dominating time factor in the kernel boot for these
    devices; with this flag it gets cut in half for the device I used
    for testing (eeepc).
    Alan took a look at the driver source and concluded that it ought to be safe
    to do for this driver.  Alan has also checked with the hardware team.

and it is all true but once we put all things together additional
constraints for PATA controllers show up (some hardware registers
have per-host not per-port atomicity) and we risk misprogramming
the controller.

I used the following test to check whether the issue is real:

  @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_
   			(timings[pio][1] << 8);
   	}
   	pci_write_config_word(dev, master_port, master_data);
  -	if (is_slave)
  +	if (is_slave) {
  +		if (ap->port_no == 0) {
  +			u8 tmp = slave_data;
  +
  +			while (slave_data == tmp) {
  +				pci_read_config_byte(dev, slave_port, &tmp);
  +				msleep(50);
  +			}
  +
  +			dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan "
  +				   "race detected\n");
  +		}
   		pci_write_config_byte(dev, slave_port, slave_data);
  +	}

   	/* Ensure the UDMA bit is off - it will be turned back on if
   	   UDMA is selected */

and it indeed triggered the error message.

Lets fix all such races by adding an extra locking to ->set_piomode
and ->set_dmamode methods for PATA controllers.

[ Alan: would be better to take the host lock in libata-core for these
  cases so that we fix all the adapters in one swoop.  "Looks fine as a
  temproary quickfix tho" ]

Cc: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Improve CRTDDC mapping by using VBT info
  drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU.
  drm/i915: Set crtc/clone mask in different output devices
  drm/i915: Always use SDVO_B detect bit for SDVO output detection.
  drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder()
  drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx
  drm/i915: Set the multiplier for SDVO on G33 platform

This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1
quirk with ALC889A codec, which caused the silent headphone output.
Also, this gives the individual Headphone and Speaker volume controls.

Reference: kernel bug#14078
	http://bugzilla.kernel.org/show_bug.cgi?id=14078Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

In patch_vt1708(), the check of MUX nids is missing and this results in
the -EINVAL error in accessing Input Source mixer element.  Simpliy
adding the call of get_mux_nids() fixes the problem.

Reference: Novell bnc#534904
	https://bugzilla.novell.com/show_bug.cgi?id=534904Signed-off-by: Takashi Iwai <tiwai@suse.de>

To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.htmlSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Reported-by: Toralf Forster <toralf.foerster@gmx.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

We should call em28xx_ir_init(dev) only when disable_ir is true.
Signed-off-by: Shine Liu <shinel@foxmail.com>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The order of indexes is reversed
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Update KConfig file to enbale selection of SDIO and USB
interfaces, and add dependancy on relevant modules.

[mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu]
Signed-off-by: Udi Atar <udia@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Fixed SDIO compilation bugs
Also fixed a memory overrun issue in buffer management.
Signed-off-by: Udi Atar <udia@siano-ms.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues]
Signed-off-by: Steve Gotthardt <gotthardt@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Previous changesets broke Hauppauge devices and their GPIO configurations.

This changeset restores the LED & LNA functionality.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Use VBT information to determine which DDC bus to use for CRTDCC.
Fall back to GPIOA if VBT info is not available.
Signed-off-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)

The lack of a proper LRU was partially worked around by taking the fence
from the object containing the oldest seqno.  But if there are multiple
objects inactive, then they don't have seqnos and the first fence reg
among them would be chosen.  If you were trying to copy data between two
mappings, this could result in each page fault stealing the fence from
the other argument, and your application hanging.

https://bugs.freedesktop.org/show_bug.cgi?id=23566
https://bugs.freedesktop.org/show_bug.cgi?id=23220
https://bugs.freedesktop.org/show_bug.cgi?id=23253
https://bugs.freedesktop.org/show_bug.cgi?id=23366

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: don't free non-existent backlight in acpi video module
  toshiba_acpi: return on a fail path
  ACPICA: Windows compatibility fix: same buffer/string store

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  inotify: update the group mask on mark addition
  inotify: fix length reporting and size checking
  inotify: do not send a block of zeros when no pathname is available

On Tue, Aug 18, 2009 at 01:45:17PM -0400, John David Anglin wrote:
>  CC      arch/parisc/kernel/traps.o
> arch/parisc/kernel/traps.c: In function 'handle_interruption':
> arch/parisc/kernel/traps.c:535:18: warning: operation on 'regs->iasq[0]'
> may be undefined

Yes - Line 535 should use both [0] and [1].
Reported-by: John David Anglin <dave@hiauly1.hia.nrc.ca>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes the bug that was reported in
  http://bugzilla.kernel.org/show_bug.cgi?id=14053

If we're in the case where we need to force a reencode and then resend of
the RPC request, due to xprt_transmit failing with a networking error, then
we _must_ retransmit the entire request.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

> James Bottomley (1):
>       module: workaround duplicate section names

-tip testing found that this patch breaks the build on x86 if
CONFIG_KALLSYMS is disabled:

 kernel/module.c: In function ‘load_module’:
 kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’
 distcc[8269] ERROR: compile kernel/module.c on ph/32 failed
 make[1]: *** [kernel/module.o] Error 1
 make: *** [kernel] Error 2
 make: *** Waiting for unfinished jobs....

Commit 1b364bf4 misses the fact that section attributes are only
built and dealt with if kallsyms is enabled. The patch below fixes
this.

( note, technically speaking this should depend on CONFIG_SYSFS as
  well but this patch is correct too and keeps the #ifdef less
  intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. )
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Replaced patch with a slightly cleaner variation by James Bottomley ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix vSMP boot crash
  x86, xen: Initialize cx to suppress warning
  x86, xen: Suppress WP test on Xen

acpi_video_put_one_device was attempting to remove sysfs entries and
unregister a backlight device without first checking that said backlight
device structure had been created.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

Return from bt_rfkill_poll() when hci_get_radio_state() fails.

value is invalid in that case and should not be assigned to the rfkill
state.

This also fixes a double unlock bug.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

Fix a compatibility issue when the same buffer or string is
stored to itself. This has been seen in the field. Previously,
ACPICA would zero out the buffer/string. Now, the operation is
treated as a NOP.

http://bugzilla.acpica.org/show_bug.cgi?id=803Reported-by: Rezwanul Kabir <Rezwanul_Kabir@Dell.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>